1. DL manuals
  2. 4iiii
  3. Bicycle Accessories
  4. BKM4G
  5. User Manual

4iiii BKM4G User Manual

Summary of BKM4G

  • Page 1

    Version 1.0 (02-20-12) bkm4g – bike sensor (speed + cadence) user guide features: • independent speed and cadence sensors for optimal placement • small unit with very low drag profile • sends signals up to 10 ft unobstructed • waterproof up to 5 feet • replaceable 3 volt cr2032 battery • wireless an...

  • Page 2

    Version 1.0 (02-20-12) bkm4g – bike sensor (speed + cadence) user guide step 1 place the rubber pad on the bottom and insert two zip ties through the speed sensor. Step 2 find a position on the frame where the cadence sensor is near the end of the crank. Mount the speed sensor at this position by en...

  • Page 3

    Version 1.0 (02-20-12) bkm4g – bike sensor (speed + cadence) user guide step 3 attach the magnet to a spoke and secure it at a position directly opposite the speed sensor: step 4 adjust the speed sensor to bring it close to the magnet, then tighten the zip ties:.

  • Page 4

    Version 1.0 (02-20-12) bkm4g – bike sensor (speed + cadence) user guide step 5 attach the cadence magnet to the crank with a zip tie opposite the cadence sensor: step 6 remove the adhesive pads from the cadence sensor:.

  • Page 5

    Version 1.0 (02-20-12) bkm4g – bike sensor (speed + cadence) user guide step 7 attach the cadence sensor to the frame with two zip ties: step 8 carefully snug all the zip ties and trim the excess:.

  • Page 6

    Version 1.0 (02-20-12) bkm4g – bike sensor (speed + cadence) user guide pairing with sportiiiis: 1. Move at least 30ft from any ant+ sensors you do not wish to pair with sportiiiis. 2. Spin the crank and rear wheel to active the bike sensor. 3. Tap and hold the sportiiiis multi-­‐function button unt...