4IPNET HSG327 Quick Installation Manual - Getting Started

Quick Installation Guide 

HSG327 Wireless Hotspot Gateway ENGLISH 

Copyright © 4IPNET, INC. All rights reserved. 

Getting Started 

HSG327 supports web-based configuration. Upon the completion of hardware installation, 

HSG327 can be configured through a PC by using its web browser with JavaScript 

enabled such as Internet Explorer version 6.0.   

Default LAN interface IP address:   

LAN1 (192.168.1.254) are mapped to Private Zone, no authentication required for users. 

LAN2 (192.168.11.254) are mapped to Public Zone, authentication required for users.

 Note: 

The instructions below are illustrated with the administrator PC 

connected to LAN1. 

Steps: 

1.  Once the hardware installation is complete, set DHCP in TCP/IP settings of the 

administrator PC to “Obtain an IP address automatically”. Connect the PC to the 

LAN1 Port of HSG327. An IP address will be assigned to the PC automatically via the 

HSG327 built-in DHCP server.

2.  Launch a web browser to access the web management interface of HSG327 by 

entering “https://192.168.1.254” or “http://192.168.1.254” in the address field. 

 Note: 

“https” is used for a secured connection. 

3.  The following Administrator Login Page will then appear. Enter“admin” (the default 

value) in the Username and Password fields, and then click Login to log in.   

4