4IPNET OWL610 Quick Installaion Manual - Getting Started
Quick Installation Guide
OWL600 Series Enterprise Access Point
ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
4
Getting Started
4ipnet OWL610 / OWL620 supports web-based configuration. Upon the completion of hardware installation,
Access Point can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet
Explorer version 6.0 and above.
The default values of LAN IP address and subnet mask of OWL610 / OWL620 are:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Steps:
1. To access the web management interface, connect the administrator PC to the LAN port of OWL610 /
OWL620 via an Ethernet cable. Then, set a static IP address on the same subnet mask as OWL610 /
OWL620 in TCP/IP of your PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of OWL610 / OWL620
(https://192.168.1.1) at the address field, and then press Enter.
Example of entering OWL610 / OWL620's default IP Address via a web browser
3. The following Admin Login Page will appear. Enter“admin” for both the Username and Password fields,
and then click Login.