4RF Aprisa SR+ User Manual - page 103
Managing the Radio | 101
Aprisa SRx User Manual 1.3.0
Serial Data Stream Mode
This parameter controls the traffic flow in the radio serial ports.
Option
Function
Broadcast
Serial port traffic from the network is broadcast on all serial ports
on this radio. This will include the RS-232 port derived from the
USB port.
Segregate
Serial port traffic from the network from a specific port number is
directed to the respective serial port only (see Segregated Port
Directions).
The default setting is Broadcast.
TRAFFIC SETTINGS
Background Bulk Data Transfer Rate
This parameter sets the data transfer rate for large amounts of management data.
Option
Function
High
Utilizes more of the available capacity for large amounts of
management data. Highest impact on user traffic.
Medium
Utilizes a moderate of the available capacity for large amounts of
management data. Medium impact on user traffic.
Low
Utilizes a minimal of the available capacity for large amounts of
management data. Lowest impact on user traffic.
The default setting is high.
Network Traffic Type
This parameter optimizes the channel settings for the predominant traffic type.
Option
Function
User Defined
Allows the user to define the channel settings (see ‘Radio >
Advanced Setup’ on page 103).
Serial Only
Optimizes the channel settings for the predominantly serial traffic.
Ethernet Only
Optimizes the channel settings for the predominantly Ethernet
traffic.
Mixed
Optimizes the channel settings for a mix of Ethernet and serial
traffic.
The default setting is Mixed.