4x4 TOUGH 150L User Manual - Tyre Deflator - Instructions

TYRE DEFLATOR - Instructions

6. Remove the unit by turning the valve 

stem adaptor in an anticlockwise direction.

Ensure a valve cap is placed on the stem to 

prevent ingress of debris.

5. When the desired pressure is reached, 

push the valve core remover in and turn 

clockwise until the valve seats firmly.

Note: Do not over tighten the valve core.

1. With the slide valve pushed 

forward, thread the valve stem 

adaptor on to the valve stem in a

clockwise direction.

2. Push the valve core remover forward 

until it engages the valve and turn 

anti-clockwise to remove valve.

4. Pull out on the slide valve to 

release air. Push in on the slide 

valve to stop air and check the

pressure. Note, gauge will not show 

correct pressure whilst deflating.

3. When the valve core is removed it 

will push the core remover out and the

gauge will read the tyre pressure.

10