4xem W30 User Manual - page 38

- 36 - 

the external FTP server for details. The folder privilege must be open for upload. 

“Primary FTP passive mode” The Network Camera is located inside the network 

protected by a firewall, data connection for FTP may be prohibited. By selecting passive 

mode, the FTP can bypass the rule and allow snapshot upload to proceed. If the passive 

mode is selected, the Network Camera can automatically attempt for active mode, if 

the external FTP server does not support passive mode.   

“2nd FTP server” The domain name or IP address of the external FTP server. 

“2nd FTP user name” Granted user name on the backup FTP server. 

“2nd FTP password” Granted password on the backup FTP server. 

“2nd FTP remote folder” Granted folder on the backup FTP server. 

“Secondary FTP passive mode” Passive mode setting for the backup FTP server.