4xem WFDV User Manual - page 32

- 28 - 

Build a Security Application 

The Administrator can combine options 

on the application page to perform many 

useful security applications. There are 

two trigger sources coming from 

attached devices, such as for motion 

detection. There are also two kinds of 

actions responding to such events, 

including uploading snapshots over the 

Internet and driving other attached 

devices. To upload the snapshots, the 

User can choose either email or FTP according to user’s needs. Both e-mail and FTP 

use the network settings on the Mail & FTP page. Refer to the definition section for 

detail configuration. 

1. Click on “Configuration” on the 

homepage, 

2. Click on “Application” in the left 

column, 

3. Check the weekdays as you need and 

give the period of "Snapshots begin" 

time and "Snapshots end" time to 

monitor the triggering conditions every 

day, 

4. Check the “Event operation”. The 

triggering condition can be set to 

detected motion or status of the attached device, 

5. Set the delay before detecting next event to avoid continuous false alarms 

following the original event, 

Send Snapshots When Motion is Detected 

If no external sensor is available, the Administrator can use the built-in motion