1. DL manuals
  2. 5DUCK
  3. Coffee Maker
  4. VIRTU 60 SERIES
  5. User Manual

5DUCK VIRTU 60 SERIES User Manual

Summary of VIRTU 60 SERIES

  • Page 1

    Virtu 60 and 80 series coffee machine users manual model: virtu 60 and 80 machine type: 9cnd… revision b, english reference: 5ducnk20 your supplier is: the manufacturer of the machine is: de jong duke postbus 190 3360 ad sliedrecht the netherlands telephone +31 (0) 184 496767 www.Dejongduke.Nl fax: ...

  • Page 2

    2 copyright © 2010, j.M. De jong duke automatenfabriek b.V. All rights reserved. Although this user manual has been put together with the utmost care, j.M. De jong duke automatenfabriek b.V. Accepts no liability for inaccuracies or omissions. No liability is accepted for the consequences arising fro...

  • Page 3

    3 contents 1 safety ............................................................................................... 4 1.1 s afety and warnings ........................................................................ 4 1.2 s tandards and norms ............................................................

  • Page 4

    4 1 safety 1.1 safety and warnings · keep this manual near the machine so the manual is immediately available. · do not use aggressive cleaning products or abrasives to clean (parts of) the machine. · the water connection must conform to local regulations. · clean the machine with fresh hygienic wat...

  • Page 5

    5 2 description of the machine 2.1 general the machine is a compact semi-automatic machine for the preparation and vending of hot drinks. Your supplier can adjust the taste and sizes of the drinks. 2.2 the front of the machine the machine can be operated using the operating panel on the door. By pus...

  • Page 6

    6 2.4 type plate the type plate is mounted on the inside of the machine, at the top left. The following data are on the type plate: · name of manufacturer · serial number · type/model specification · date of construction · water connection 1.1 technical specifications dimensions: height 795 mm width...

  • Page 7

    7 3 before usage 1.1. Installation installation, transportation and adjustment of the machine is specialized work. Only properly trained service personnel should carry this out. For instructions about transportation, unpacking and installation of the machine, see the technical manual. 1.2. Operation...

  • Page 8

    8 4 operation 4.1 operatiing the machine in free vend mode 1. Place a cup under the outlet on the cup stand. All consumptions are dosed in the center of the cup stand except the hot chilled water. 2. Select your desired drink. 3. Follow the instructions on the screen. 4. After pressing the start but...

  • Page 9

    9 5 maintenance and filling 5.1 daily maintenance failing to perform the daily maintenance negatively affects the quality of the products and can lead to malfunctioning of the machine. 1. Open the door of the machine. 2. Install the safety key (see paragraph: install safety key) flush mixers and bre...

  • Page 10

    10 5.2 weekly maintenance failing to perform the weekly maintenance negatively affects the quality of the products and can lead to malfunctioning of the machine. 1. Open the door of the machine. Clean the mixing system 2. Remove the mixing system according to paragraph “ disassembling the mixing bow...

  • Page 11

    11 5.3 monthly maintenance failing to perform the monthly maintenance work negatively affects the quality of the products and can lead to malfunctioning of the machine. Apart from the weekly maintenance, the following tasks have to be performed monthly to ensure the machine operates correctly and op...

  • Page 12

    12 5.4 place safety key insert the safety key and turn a quarter turn clockwise: the machine is now powered up. Parts in the machine can move automatically and hot water can flow out. Be careful! 1 2 3.

  • Page 13

    13 5.5 cleaning cycle for coex brewer run the cleaning cycle for the coex brewer weekly using the coex cleaning tablet. 1. Open the door of the machine. 2. Press the weekly cleaning cycle button and follow the instructions on the screen: a. Place cleaning tablet in brewer. B. Place service key. C. P...

  • Page 14

    14 5.6 fill up canisters do not fill up the canisters further than necessary for one or two days. This will keep the products fresh. Make sure that the canisters remain filled with a layer of at least 4- cm of product. Only use products that are recommended by the supplier of the machine. Filling th...

  • Page 15

    15 5. Place the canister back in the machine. Make sure the drive at the back of the canister fits well on the motor drive. 6. Push the canister at the front over the positioning ridge. 7. Turn the nozzle of the canister downwards. Check the position of the nozzle of the canister. It must be positio...

  • Page 16

    16 fill up bean canister (if applicable) 1. Press green locking knob to unlock the canister door. 2. Pull the green locking handle towards you to unlock the canister. 3. Pull the canister upwards. 4. Fill the canister with fresh coffee beans..

  • Page 17

    17 5.7 removal of the brewer removal of the brewer is necessary for performing maintenance. Only properly trained personnel may work on the brewer itself. Instructions for performing work on the brewer are described in the technical manual. Carry out the following procedure for removal of the brewer...

  • Page 18

    18 5.8 install the brewer carry out the following procedure to replace the brewer: 1. Place the brewer in the bracket. 2. Push the brewer firmly in the machine till you hear “click” and the green handle is turned downwards in its home position. Make sure that the green handle is in the down position...

  • Page 19

    19 5.9 assembling and disassembling the mixer disassembling the mixing system: 1. Remove outlet pipes from the mixers. 2. Turn the bayonet catch counterclockwise (approx. 10º). 3. Remove the mixer house. 4. Pull the mixer parts towards you..

  • Page 20

    20 5. Pull the whipper blade towards you. 6. Turn the base plate counterclockwise and pull it towards you. 7. Ready.

  • Page 21

    21 assembling the mixing system: 1. Install the base plate. 2. Install the whipper blade. Be sure that the arrow is at the flat side of the ax. 3. Install the mixer house. 4. Turn the bayonet catch clockwise..

  • Page 22

    22 5. Install the outlet pipes on the mixers. 6. Ready..

  • Page 23

    23 6 failure and error messages always check whether an error message is shown on the display. If no error message is shown and the machine does not work correctly, you may find the possible cause and solution in the following table. For failures not mentioned in this manual, contact the service eng...

  • Page 24

    24 place cup in center or place cup right cup needs to be installed on the grid before the start button is available. Water filter installed? Consult the service engineer. Replace water filter consult the service engineer. Shortcut temp.Sensor consult the service engineer. Startup problem open and c...

  • Page 25

    25 notes: ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------- --------------...