Summary of NRG GLO
Page 1
Q u i c k s t a r t g u i d e sp251 qsg 00
Page 2
Bluetooth wireless is a quick and easy way to connect a smartphone to a speaker or a headset. There are basically two steps to making bluetooth work. Pairing: the two devices get to know each other. Connecting: the two devices do something together (like play music). “hi. I’m a phone.” this guide ta...
Page 3
Make sure the following items came in this package. Step 1: unpack your speaker usb cable.
Page 4: To Charge The Speaker:
Before you start using the hex nrg glo speaker for the first time, it’s a good idea to charge it completely. Speaker back step 2: charge the nrg glo to charge the speaker: plug the included usb cable into the charge jack on the back of the speaker. Plug the other end of the usb charging cable into a...
Page 5: Power/pair Button On
Step 3: turn on press and hold the power/pair button on the front of the speaker. The power up tone sounds and the indicator light on the front of the speaker starts blinking. After a few seconds, the speaker goes to bluetooth pairing mode to set up with your smartphone. Speaker front.
Page 6: Power/
Enable bluetooth on your smartphone or other device. Step 4: pair + connect if you’ve previously paired your phone or other bluetooth device with this speaker, the speaker will automatically attempt to reconnect to that device when you switch the speaker on. If you want to pair to a new device, give...
Page 7
Bluetooth wireless connection tips •makesurethebluetoothcapabilityofyourdeviceisturnedon. •makesurethere’snothingpluggedintothespeaker’sauxin jack when you’re trying to use bluetooth. •thebluetoothwirelessconnectionworksuptoarangeofroughly 33 feet (10 meters). This range may vary, however, based on ...
Page 8
To adjust the volume of your audio: use the volume controls on your phone. Set your device’s volume for music to 75%. Note: this is to make sure the sound from the speaker isn’t too loud when you start streaming. Start playing music or other audio on your device. Within seconds, the speaker starts s...
Page 9: Glow Button On
Press the glow button on the front of the speaker to activate the light ring around the top of the speaker. Keep pressing the glow button to cycle step 6: make it glow! Through the five light modes. Party mode: the light ring pulses to the beat of your music (you might need to turn it up!). Breath m...
Page 10: Aux
Use a 3.5mm audio cable (not included) to connect the audio output from your device to the aux in audio input on the speaker’s back panel. Using the aux in input the speaker automatically switches to the aux in audio, and the pairing indicator on the front of the speaker turns white. To listen to bl...
Page 11: Power/pair Button
Tour of the speaker power/pair button turns the speaker on and off and puts the speaker into pairing mode to connect to a new bluetooth device, like a smartphone. Press and hold to turn on/ off. A short press enters pairing mode. Pairing indicator shows the bluetooth status of the speaker: •fastblin...
Page 12: Charging Indicator Shows
If you have any questions about this product, visit 808audio.Com or call our toll-free help line at 1-800-732-6866. Glow button activates the light ring around the top of the speaker. Keep pressing it to cycle through the five light modes: party mode, breath mode, chase mode, solid light, dimmed sol...