Quick start guide sp260 qsg 00
Make sure the following items came in this package. Step 1: unpack your speaker bluetooth wireless is a quick and easy way to connect a smartphone to a speaker or a headset. There are basically two steps to making bluetooth work. Pairing: the two devices get to know each other. Connecting: the two d...
Before you start using the hex xs speaker for the first time, it’s a good idea to charge it completely. Speaker side step 3: turn on press and hold the button on the top of the speaker. The power up tone sounds and the button starts blinking. After a few seconds, the speaker goes to bluetooth pairin...
Enable bluetooth on your smartphone or other device. Step 4: pair + connect if you’ve previously paired your phone or other bluetooth device with this speaker, the speaker will automatically attempt to reconnect to that device when you switch the speaker on. If you want to pair to a new device, give...
Bluetooth wireless connection tips • makesurethebluetoothcapabilityofyourdeviceisturnedon. • makesurethere’snothingpluggedintothespeaker’sauxin jack when you’re trying to use bluetooth. • thebluetoothwirelessconnectionworksuptoarangeofroughly 33 feet (10 meters). This range may vary, however, based ...
Use a 3.5mm audio cable (not included) to connect the audio output from your device to the aux in audio input on the speaker’s side panel. The speaker automatically switches to the aux in audio, and the button on the top of the speaker turns white. Using the aux in input to listen to bluetooth audio...
Tour of the speaker aux in jack lets you connect an audio device directly to the speaker using a 3.5mm audio cable. Button has three functions: (1) it turns the speaker on and off (press and hold), (2) puts the speaker into pairing mode (short double-press) to connect to a new bluetooth device, and ...
If you have any questions about this product, visit 808audio.Com or call our toll-free help line at 1-800-732-6866..
