909 BL18L Instruction Manual - Attaching The Blower Tube
12
Avoid charging, using or storing your battery in
temperatures below 0ºC and above 40ºC.
Attaching the blower tube
CAUTION.
Always ensure that
the tool is switched off and the
battery is removed before making
any adjustments or maintenance
procedures.
Slide the blower tube (2) onto
the blower housing, ensuring the
hole in the tube matches up with
the raised section in the housing.
Turning the blower on and off
1. Ensure the battery pack (3) is
inserted.
2. To switch on squeeze the
trigger switch (1).
3. To switch off, release the
trigger switch.
Operation of the blower
Hold the blower firmly and rotate
from side to side, holding the
tube several inches above the
ground. Slowly move forward
directing the debris to the desired
location.
•
Prior to using the blower,
ensure you have read and
understood this instruction
manual.
•
Ensure you are wearing suitable clothing and also safety
equipment like safety glasses, ear protection and a mask
if necessary.
•
Ensure the attachments to the blower are correctly fitted
and adjusted.
•
Be aware of other people and animals in the area where
you are to be operating the blower.
Tips for using your blower
The following points may assist you in the operation of the
blower.
•
Always try and blow dry leaves, cuttings or general
garden debris, wet material is difficult to move.
•
If the leaves etc. are damp, then use the blower to pile
the leaves etc. into one area for collection.
Maintenance and storage information
Prior to cleaning or any maintenance, always ensure the
battery pack has been removed from the tool.
When you have finished using the blower, always check to
make sure the product is clean and free of dirt and debris.
Do not use solvents to clean the blower.
Store the blower in a dry place, and out of reach of children.