909 ES99 Instruction manual - Unpacking
9
- If the mower vibrates in an abnormal way, find and
remove the cause of the vibration immediately. If unable
to correct, take the mower to an authorized service
centre.
- Check the bolts and nuts regularly. Bolts and nuts may
vibrate loose over time.
•
Stop the engine:
– Whenever you leave the lawn mower unattended.
Remove the key from models with electric starters.
– Before refuelling.
– Every time you remove or replace the grass-catcher.
•
Reduce the throttle before turning off the engine and turn
the fuel off when you have finished mowing, following the
instructions in the engine handbook.
•
When mowing, always keep to a safe distance from
therotating blade. This distance is the length of the
handle.
•
Never cut grass while walking backwards.
•
Stop the engine before pushing mower across gravel
drives, walks or roads.
•
This machine is to be used exclusively for cutting natural
grass. Never use the mower for other purposes. Any
other utilization can involve danger for your safety and
can involve damage to the mower.
•
The user is responsible for the safety of other people,
animals and objects in the working area. Keep children
and domestic animals at a safe distance while the mower
is in use.
WARNING: Fuel is highly flammable.
•
Keep fuel in a jerry can specially made for this purpose.
•
Fill the fuel tank with a funnel and outside. Do not smoke
or use a mobile phone during this process.
•
Fill with fuel and oil before starting the engine. Never
open the cap of the fuel tank to add gasoline while the
engine is running or still hot.
•
Do not start the engine if there is spilt fuel on the mower
or in the area surrounding. Take the mower away from
the zone where fuel has been split and avoid any
contact from a hot source as long as the split gasoline is
completely evaporated.
•
Tighten the fuel tank cap and jerry can cap tightly.
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Lawn Mower is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Contents of carton
•
Upper and lower handle assembly with Handle Bar
Locking levers (including retaining screws x 2)
and Key switch assembly
•
40L Plastic catcher
•
Spark Plug Wrench
•
Battery Charger
•
4 x Bolts for retaining handles to the mower.
•
4 x Retaining knobs
•
1 x Key