909 LS1200 Instruction Manual - Description Of Symbols
3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
For safe operation read instruction manual.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
LS1200
TCAT235
Voltage:
230 – 240V ~ 50 Hz
Power rating:
1200W
2000W
No load speed:
5000 min
-1
4700 min
-1
Blade diameter:
165mm (6 1/2")
235mm (9 1/4")
Blade teeth:
40 TCT
40 TCT
Blade arbour:
16mm (5/8")
25.4mm (1”)
Blade kerf:
2.2mm
2.4mm
Bevel capacity:
0° to 55°
0° to 55°
Depth of cut at 90°:
55mm (2 5/32")
82mm (3 1/4")
Depth of cut at 45°:
38mm (1 1/2")
58mm (2 9/32")
Laser:
Class 2
N/A
Electrical insulation:
Double insulated
Weight:
4.1kg (9.3lbs)
5.4kg (11.8lbs)
This tool is double insulated. There are two independent
barriers of insulation to protect you from the possibility of
electric shock.
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary.
WARNINGS.
1. Do not attempt to change the position of the laser under
any circumstances, it has been set at the factory and is
accurately focused on the centre of the saw blade.
2. It may be more difficult to see the laser line in conditions
of bright sunshine and on certain surfaces.
Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.