909 LS1620 Instruction manual - Description Of Symbols
3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards
for electromagnetic compatibility.
For safe operation read instruction manual.
Specifications
Nominal voltage:
230–240Vac ~ 50Hz
Power:
S2 5 min 125W
Speed:
550–1600 SPM
Maximum Depth of cut: 50mm
Stroke length:
20mm
Blade Type:
Pinned or Plain
Blade length:
Pinned: 128mm between pins
Flat: 127mm
Blade change:
Pinned: Tool-free
Plain: Hex Key Clamp
Bevel angle:
0° to 45° left
Throat depth:
405mm
Light:
12Volt 10W
Introduction
Your new 909 power tool will more than satisfy
your expectations. It has been manufactured under
stringent 909 Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new 909 Power Tool. Take
special care to heed the Cautions and Warnings.
Your 909 power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.