909 TS900 Instruction Manual - Contents Of Carton
6
•
Ensure that you have removed foreign objects such as
nails and screws from the work before commencing
sanding.
•
Rags, cloths, cord, string and the like should never be left
around the work area.
•
Use safety equipment including safety goggles or
shield, ear protection, dust mask and protective clothing
including safety gloves.
Wear goggles
Wear earmuffs
Wear a breathing mask
The tool must be used only for its prescribed purpose.
Any use other than those mentioned in this Manual will
be considered a case of misuse. The user and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse.
The manufacturer shall not be liable for any changes made
to the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed
it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the tool’s
construction and design:
•
Damage to the lungs if an effective dust mask is not
worn.
•
Damage to hearing if effective earmuffs are not worn.
Contents of carton
• 1 x 80 Grit sanding belts (1 fitted on product)
• Dust canister
• Inversion stand and 2 x clamps
• Dust extraction adaptor
Assembly
The sander is packed fully assembled.
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.