A&D FS-15Ki Instruction Manual - 11. Functions

24

11. FUNCTIONS 

The scale has Function settings to expand your applications. 

The parameters set in the Function settings are maintained even if the power switched 

off. 

11-1. The procedure for setting parameters 

1. Turn the power off. 

2. Press and hold the    ZERO    key and turn the power 

on via the  ON/OFF  key. Then the fist function 

number is displayed. 

3. Enter the Function number using the 10-ley pad. 

4. Press the   ENT   key. Then the parameter stored is 

appears.

3. Enter the parameter value using the 10-ley pad. 

‰ If you do not need to change the parameter, turn the 

power off without pressing    ENT    key. 

‰ If you like to go to the next function number, press the   

  ZERO    key and set the new parameter if necessary.

4. Press the    ENT    key. The display shows    end   for 

a few seconds and returns to weighing mode. 

‰ Be sure to press the    ENT    key because all of the new 

parameters are not stored until      end

 is displayed. 

-00

end

00

-

f01-

01

-

f01-

0

1

Function number

Parameter

-

f07-

0

1

-

f07-

01

-

f07-

0

0

-

f08-

0

1