A&D GF-10K Instruction Manual - page 35
33
10. Function Table
This function table reads or rewrites the parameters that are stored in the balance. These
parameters are maintained in non-volatile memory, even if the AC adapter is removed.
10-1-1. Structure And Sequence Of The Function Table
This function table menu consists of two layers. The first layer is the "Class" and the second
layer is the "Item". It has effect that a parameter is stored in each item and is displayed latest.
New parameters are applied to the balance after the
key is pressed.
Example
This example sets "Stores weighing data" for "Data memory" and "1 minute" for
"Interval time".
Caution
Check the settings and condition before changing parameters.
10-1-2. Display And Operation Keys
The symbol "〇" shows effective parameter.
When pressed and held in the weighing mode, enters the function table mode.
Selects the class or item in the function table mode.
Changes the parameter.
When a class is displayed, moves to an item in the class.
When an item is displayed, stores the new parameter and displays the next class.
When an item is displayed, cancels the new parameter and displays the next class.
When a class is displayed, exits the function table mode and returns to the weighing mode.
Weighing mode
Start.
Finish
Weighing mode
Class
Item
Press several
times
Press and hold
Press several
times
Press five times
Item
Data memory
Parameter
Stores weighing data
Parameter
1 minute
Item
Interval time