- 0 - 1wmpd4002371.
- 1 - safety precautions all safety messages are identified by the following the words " warning " and " caution ". These words mean the following. Warning important information to alert you to a situation that might cause serious injury and damage to your property if instructions are not followed. ...
- 2 - parts description.
- 3 - preparation 1. Installing batteries / connecting the ac adapters batteries caution when replacing batteries, be careful not to apply too much force to the weighing pan. An excessive force could damage the scale. Remove the battery compartment cover and insert six batteries (r20p/lr20/d size) i...
- 4 - weighing before weighing automatic power-off function. If the scale is left on and the stable indicator is displayed, the automatic power-off function turns the power off after approximately five minutes (factory setting). To disable or enable the function, press the [on/off] key while pressin...
- 5 - calibration when to calibrate calibration may be required when the scale is initially installed, if it is moved a substantial distance, or in accordance with local regulations. This is necessary because the weight of a mass in one location is not necessarily the same in another location. Also,...
- 6 - calibration by gravity compensation if you have calibration weights at the capacity of the scale, you can calibrate the scale with the weights instead of compensating for the gravity acceleration. The scale is calibrated at 9.798 m/sec 2 at the factory. If the gravity acceleration at your loca...
- 7 - specifications model sk-1000 sk-2000 sk-5000 sk-10k sk-20k sk-30k capacity 1000 g 2.2 lb 2000 g 4.4 lb 5000 g 11 lb 10 kg 22 lb 20 kg 44 lb 30 kg 66 lb resolution 0.5 g 0.001 lb 1 g 0.002 lb 2 g 0.005 lb 0.005 kg 0.01 lb 0.01 kg 0.02 lb 0.02 kg 0.05 lb non-linearity ±1g ±2g ±4g ±0.01 kg ±0.02 ...
- 8 - world map.
- 9 - 3-23-14 higashi-ikebukuro, toshima-ku, tokyo 170-0013 japan telephone: [81] (3) 5391-6132 fax: [81] (3) 5391-6148 a&d engineering, inc. 1756 automation parkway, san jose, california 95131 u.S.A. Telephone: [1] (408) 263-5333 fax: [1] (408)263-0119 a&d instruments limited unit 24/26 blacklands ...
