A&D UA-1010 Instruction Manual

Manual is about: Digital Blood Pressure Monitor

Summary of UA-1010

  • Page 1

    Digital blood pressure monitor model ua-1010 instruction manual original manuel d ’ instructions manual de instrucciones manuale di istruzioni 使用手冊 1wmpd4002223a.

  • Page 2: Contents

    English 1 contents dear customers.................................................................... 2 preliminary remarks ............................................................. 2 precautions........................................................................... 2 parts identification......

  • Page 3: Dear Customers

    English 2 dear customers congratulations on purchasing a state-of-the-art a&d blood pressure monitor, one of the most advanced monitors available today. Designed for ease of use and accuracy, this monitor will facilitate your daily blood pressure regimen. We recommend that you read through this manu...

  • Page 4: Parts Identification

    English 3 parts identification battery compartment display air hose arm cuff dc jack air connector plug air socket who classification indicator and pressure bar indicator memory systolic pressure diastolic pressure pulse rate battery indicator heart mark 1.5v batteries (r6p, lr6 or aa) clock display...

  • Page 5: Symbols

    English 4 symbols symbols that are printed on the device case symbols function / meaning recommended action standby and turn the device on. Battery installation guide direct current sn serial number 2010 date of manufacture type bf: device, cuff and tubing are designed to provide special protection ...

  • Page 6: Symbols

    English 5 symbols symbols function / meaning recommended action previous measurements stored in memory. Average data full battery the battery power indicator during measurement. Low battery the battery is low when it blinks. Replace all batteries with new ones when the mark blinks. Unstable blood pr...

  • Page 7: Operation Mode

    English 6 operation mode 1. Normal measurement press the start button. Blood pressure is measured and the data is stored in memory. This device can store the last 90 measurements in memory. 2. Recalling the data press the or button to recall the data in memory. The average of all measurements is dis...

  • Page 8: Using The Monitor

    English 7 using the monitor installing / changing the batteries 1. Remove the battery cover. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+ and -) are correct. Use only r6p, lr6 or aa batteries. 3. Attach the battery co...

  • Page 9: Using The Monitor

    English 8 start press year month day hour minute or or or or or or turn off using the monitor adjusting the built-in clock adjust the clock prior to use. 1. Press the set button until the year starts blinking. 2. Select the year using the or button. Press the set button to set the current year and m...

  • Page 10: Using The Monitor

    English 9 using the monitor selecting the correct cuff size using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The index and proper fit range, on the cuff...

  • Page 11: Using The Monitor

    English 10 using the monitor symbols that are printed on the cuff symbols function/meaning recommended action artery position mark set the mark on the artery of the upper arm or in line with the ring finger on the inside of the arm. ▲ index ref catalog number proper fit range for adult cuff it's pri...

  • Page 12: Measurements

    English 11 start measurements before measurement, read “notes for proper measurement” on the next page. Normal measurement 1. Place the cuff on the arm (preferably the left arm). Sit quietly during measurement. 2. Press the start button. All of the display segments are displayed. Zero (0) is display...

  • Page 13: Measurements

    English 12 measurements measurement with the desired systolic pressure model ua-1010 is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. Use this method when re-inflation occurs repeatedly or when the results are not displayed even if the pressure decr...

  • Page 14: Recalling The Memory Data

    English 13 recalling the memory data note: this device stores the last 90 measurements in memory. 1. Press the or button. The average of all measurements and the number of data are displayed. (if no data, “0” is displayed. Press the , or start button to turn the device off.) 2. Each time the button ...

  • Page 15: Pressure Bar Indicator

    English 14 what is an irregular heartbeat the ua-1010 blood pressure monitor provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. An irregular heartbeat is defined as a heartbeat that varies by 25% from the average of all heartbeats during the blood pressure ...

  • Page 16: About Blood Pressure

    English 15 about blood pressure what is blood pressure? Blood pressure is the force exerted by blood against the walls of the arteries. Systolic pressure occurs when the heart contracts. Diastolic pressure occurs when the heart expands. Blood pressure is measured in millimeters of mercury (mmhg). On...

  • Page 17: Troubleshooting

    English 16 described in this manual to get to know your normal blood pressure. Regular readings give a more comprehensive blood pressure history. Be sure to note the date and time when recording your blood pressure. Consult your doctor to interpret your blood pressure data. Troubleshooting problem p...

  • Page 18: Maintenance

    English 17 maintenance do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, contact the authorized dealer in your area or our customer service department. The a&d customer...

  • Page 19

    A&d company, limited 1-243 asahi, kitamoto-shi, saitama 364-8585 japan telephone: [81] (48) 593-1111 fax: [81] (48) 593-1119 a&d instruments ltd. Unit 24/26 blacklands way, abingdon business park, abingdon, oxfordshire ox14 1dy united kingdom telephone: [44] (1235) 550420 fax: [44] (1235) 550485 a&d...