A&D UA-787 Plus Instruction Manual - Recalling Memory Data

English  11

Recalling Memory Data 

Note:  This device stores the last sixty measurements in memory 

automatically. The data is retained as long as the batteries 

are in the device. When you remove the batteries or the 

batteries are drained, the data will be erased. 

1.  Press the MEMORY button. 

2.  The date and the most recent data are 

displayed. 

3.  When the MEMORY button is pressed while 

data is displayed, the previous data is 

displayed. 

4.  After the last data is displayed, the display 

goes blank. 

5.  Press and hold the MEMORY button until 

the “

” (memory) mark blinks to clear the 

stored data.   

Note: Pressing the START button while the memory data is displayed 

initiates the UA-787

  to start taking a measurement. 

Date 

Data 

Press the MEMORY button