A&D UA-787 Instruction Manual - Recalling Memory Data

ENGLISH  9 

Should the device detect a condition that is abnormal, it will stop the 

measurement and display an error symbol. See the section on the 

descriptions of display symbols for details. 

This blood pressure monitor is intended for use by adults only. Consult with 

your physician before using this device on a child. A child should not use 

this device unattended. 

Recalling Memory Data 

Note:  This device stores the last thirty measurements in memory 

automatically. The data is retained as long as the batteries 

are in the device. When you remove the batteries or the 

batteries are drained, the data will be erased. 

1.  When nothing is displayed, press the MEMORY button. 

2.  The date and the newest data are displayed. 

3.  When the MEMORY button is pressed while data is 

displayed, the previous data is displayed. 

4.  Each time the MEMORY button is pressed, the 

memorized data is displayed. After the last data is 

displayed, the display goes blank. 

5.  Press and hold the MEMORY button until the “

” (memory) mark flashes 

for clearing the stored data.   

Note:  Pressing the START button while the memory data is displayed 

initiates the UA-787 to start taking a measurement. 

About Blood Pressure   

1. What is blood pressure? 

Blood pressure is the force exerted by blood against the walls of the arteries. 

Systolic pressure occurs when the heart contracts. Diastolic pressure occurs 

when the heart expands. 

Blood pressure is measured in millimeters of mercury (mmHg). One's natural 

blood pressure is represented by the fundamental pressure, which is 

measured first thing in the morning while one is still at rest and before eating.