1. DL manuals
  2. A&D
  3. Scales
  4. UC-321PBT
  5. Instruction Manual

A&D UC-321PBT Instruction Manual - Normal Measurement

Other manuals for UC-321PBT: Datasheet, Instruction Manual
Manual is about: Precision Health Scale

Summary of UC-321PBT

  • Page 1

    Wm+pd4001052 precautions please read this booklet before using your scale. Do not place your scale on a soft, wet or slippery floor. It is recommended that the scale be used on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach t...

  • Page 2: Scale Components

    Scale components display ready/complete symbol low battery mark front measurement switch back slide mode battery compartment the following measurements can be selected by the slide switch and are clas- sified into two categories - weight a and weight b. Within weight a and weight b, you have a choic...

  • Page 3: Display Symbols

    Display symbols ready/complete symbol. This symbol is displayed when the measure- ment display is stable. Low battery mark. If this mark is displayed, replace the batteries with new ones. Installing (or replacing) batteries caution insert the battery with the positive (+) and negative (-) terminals ...

  • Page 4: Normal Measurement

    Normal measurement measuring your weight 1 set the slide switch to the correct mode. Example: set the slide switch to “weight b”. 2 press the measurement switch gently. All display segments are visible for several sec- onds. 3 wait until the symbol is displayed. Wait until the display 0.0 kg /0.0 lb...

  • Page 5: Press The Measurement Switch

    Measuring an infant or small animal 1 set the slide switch to the correct mode. Example: set the mode switch to “weight b”. 2 press the measurement switch gently and step on your scale. All display segments are indicated for sev- eral seconds. Step on the scale without any baby or animal in your han...

  • Page 6: Measuring Weight On A Carpet

    Measuring weight on a carpet it is recommended that the scale be used on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic feet. How to insert the add-on feet there are two pins on each add-on foot side. Match those ...

  • Page 7: Specifications Uc-321Pbt

    Specifications uc-321pbt digital display liquid crystal display, 25 mm character height maximum capacity 200 kg / 450 lb minimum display 0.1 kg / 0.2 lb wireless communication wml-30ah (mitsumi electronics co. Ltd.) power source four type aa batteries (r6p, 1.5 volt x 4, not included) battery life a...

  • Page 8: Before Requesting Service

    How the wireless connection works at the end of the measurement, your weight will be sent automatically to your health monitoring device. You do not need to do anything. If the health moni- toring device is not working or is not within range of the scale, the weight will be stored in the scale's mem...