A&D UC-322 Instruction Manual

Other manuals for UC-322: Datasheet
Manual is about: Precision Health Scale

Summary of UC-322

  • Page 1

    Wm+pd4001090a precision health scale model uc-322 before use precautions ............................................. 1 scale components .................................. 2 display symbols ..................................... 3 installing (or replacing) batteries ........... 4 maintaining the sca...

  • Page 2: Scale Components

    Scale components top underside - 2 -.

  • Page 3: Display Symbols

    Display symbols symbol bmi user 1 user 2 flashing description this symbol appears when the measurement display is stable. This symbol appears when the bmi score is displayed after weight measurement. This symbol appears when you are presetting your height. This symbol appears when user 1 is measurin...

  • Page 4: Caution

    Installing (or replacing) batteries caution insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. If you fail these battery directions, it may cause battery leakage. Replace all four batteries with new ones, w...

  • Page 5: Note

    - 5 - bmi= weight (kg) height (m) x height (m) measuring your weight on a carpet please use the accessory add-on feet if you wish to use the precision health scale on a carpet. Steps for installing the add-on feet 1 each add-on foot has two pins. Match those pins to the holes on the scale leg and in...

  • Page 6: Presetting Your Height

    Presetting your height the scale can save a height between 30 cm and 220 cm in increments of 0.1 cm. The procedure below is an example of how to preset the height of user 1 to 179.1 cm. 1 with the scale turned off, press and hold the on/off 1 switch. To preset the height of the user 2, press and hol...

  • Page 7

    Measuring your weight (with the preset height) up to 15 weight data can be saved in memory, each for user 1 and for user 2. Additional measurements are saved by deleting the oldest data in memory. After measurement, the bmi score is displayed. The procedure below is an example of how to measure the ...

  • Page 8

    Measuring your weight (with no preset height) up to 15 weight data can be saved in memory, each for user 1 and for user 2. Additional measurements are saved by deleting the oldest data in memory. The procedure below is an example of how to measure the weight of user 1, of whose height has not been p...

  • Page 9

    Measuring your weight (guest mode) the guest mode is a procedure to measure a weight without saving the weight data. 1 press the on/off 1 and on/off 2 switches at the same time. 88888 appears flashing. 2 wait until the ok symbol appears. Wait until the display 0.00 kg and the ok symbol appear. Step ...

  • Page 10

    Displaying data saved in memory the procedure below is an example of how to display the weight data of user 1 that was saved in memory. 1 with the scale turned off, press and hold the on/off 1 switch. To display the weight data of user 2, press and hold the on/off 2 switch. 2 release the switch when...

  • Page 11

    Deleting data saved in memory the procedure below is an example of how to delete the weight data of user 1 that was saved in memory. 1 with the scale turned off, press and hold the on/off 1 switch. To delete the weight data of user 2, press and hold the on/off 2 switch. 2 release the switch when - a...

  • Page 12: Specifications

    Specifications measuring method electric resistance digital display liquid crystal display, 18 mm character height maximum capacity (max) 150 kg minimum display (d) 0.05 kg power source four type aa batteries (r6p, 1.5 volt x 4) battery life approximately 2000 measurements dimensions 210 (d) x 295 (...