A&D UT-601 Instruction Manual - Using The Thermometer
English 7
Using the Thermometer
Measuring Ear Temperature
1. Press the
On/Scan
button to turn the
thermometer on. All the display segments appear.
Note: The thermometer will turn off automatically
after 30 seconds of no operation.
2. Select the unit of measure as necessary.
While all the display segments appear, press and
hold the
On/Scan
button to toggle between °C
and °F. Release the button when the unit to be
used appears.
Note: The thermometer will turn off automatically
after 30 seconds of no operation.
3. The last reading stored in MEMORY appears
and a short beep sounds to indicate that the
thermometer is ready to scan.
4. Insert the probe into the ear canal.
For babies, gently pull the ear back to straighten
the ear canal for easier insertion.
5. Press and hold the
On/Scan
button until a
beep sounds.
6. Release the
On/Scan
button.
A long beep sounds to indicate completion of the
temperature measurement.
Take the thermometer out of the ear canal and
read the value.
For further measurements, repeat steps 4 to 6.
When turned on
Select the unit to
be used
Last reading in
memory
Insert the
thermometer
Straighten the ear
canal for easier
insertion