1. DL manuals
  2. A-Dec
  3. Medical Equipment
  4. 332
  5. Instructions For Use Manual

A-Dec 332 Instructions For Use Manual

Manual is about: Delivery System 300 Series

Summary of 332

  • Page 1

    A-dec 300 delivery systems models 332, 333, 334, 335, and 336 instructions for use.

  • Page 2

    A-dec 300 delivery systems instructions for use copyright © 2015 a-dec inc. All rights reserved. A-dec inc. Makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. A-dec inc. Shall not ...

  • Page 3

    86.0092.00 rev f 1 content map content map flexarm ..........5, 16, 18 master toggle .............2 tray holder ................17 oil collector ............. 19 water bottle ............. 20 operate / adjust .......................................... 2 clean / maintain ................................

  • Page 4

    2 a-dec 300 delivery systems instructions for use operate / adjust operate / adjust power on/off master toggle use the master toggle to turn on the power, water, and air. The master toggle is normally located on the delivery system, but may instead be located on the support center or floor box on ch...

  • Page 5

    86.0092.00 rev f 3 chair safety features a-dec dental chairs and systems include several features designed to improve safety. Activated stop switches may halt the chair or prevent it from moving. To help ensure uninterrupted chair motion: • remove any potential obstructions under the chair and attac...

  • Page 6

    4 a-dec 300 delivery systems instructions for use operate / adjust handpiece activation and operation to activate a handpiece, lift it from the holder or pull the whip forward. Use the foot control to perform the desired handpiece operation. Control operation procedure disc foot control run a handpi...

  • Page 7

    86.0092.00 rev f 5 control head positioning flexarm brake on systems with a counterbalanced flexarm, an integrated brake maintains the vertical position of the control head (with up to 8 lb [3.6 kg] of additional weight). The brake does not restrict side-to-side movement. To adjust the control head ...

  • Page 8

    6 a-dec 300 delivery systems instructions for use operate / adjust touchpad controls the a-dec touchpad and footswitch control chair movement in the same way. See your dental chair instructions for use for detailed information about your footswitch controls. Basic touchpad functions your a-dec 300 s...

  • Page 9

    86.0092.00 rev f 7 touchpad controls (continued) manual chair controls press and hold an arrow button until the chair is in the desired position. The horizontal arrows raise and lower the chair back. The vertical arrows raise and lower the chair base. Programmable chair controls press and release a ...

  • Page 10

    8 a-dec 300 delivery systems instructions for use operate / adjust touchpad controls (continued) reprogram entry/exit, treatment 1 and 2 * buttons to change the factory preset chair positions assigned to the entry/exit and treatment buttons ( , , *): 1. Use the manual controls to position the chair ...

  • Page 11

    86.0092.00 rev f 9 touchpad controls (continued) dental light auto on/off feature the auto on/off feature turns the a-dec light on once the chair reaches a preset treatment position. When you press or , the dental light turns off and the chair moves to that preset position. To disable the auto on/of...

  • Page 12

    10 a-dec 300 delivery systems instructions for use operate / adjust electric handpiece settings (deluxe touchpad only) standard mode to activate the electric motor, lift the handpiece from the holder. The touchpad screen displays the previous settings used for that hand- piece position. Standard mod...

  • Page 13

    86.0092.00 rev f 11 electric handpiece settings (deluxe touchpad only) (continued) endodontics (endo) mode in addition to handpiece speed adjustments, the endo mode allows you to change a number of settings based on the specific file and desired handpiece behavior. Icons on the touchpad screen refle...

  • Page 14

    12 a-dec 300 delivery systems instructions for use operate / adjust electric handpiece settings (deluxe touchpad only) (continued) endo mode touchpad screen icons icon setting description speed setpoint for file speed limit. For more information, consult your file manufacturer. Torque setpoint for f...

  • Page 15

    86.0092.00 rev f 13 touchpad help messages the deluxe touchpad screen displays help messages for disabled operations. When a help message appears, record the screen message and the function you were performing in case service is required. For complete details on help messages, see the regulatory inf...

  • Page 16

    14 a-dec 300 delivery systems instructions for use operate / adjust handpiece coolant adjustments the air coolant knob on your delivery system simultaneously adjusts air flow to all handpiece positions. Each water coolant knob adjusts water flow to a single position. Use the following process to adj...

  • Page 17

    86.0092.00 rev f 15 drive air message cover screws handpiece drive air adjustments you can check drive air pressure on the deluxe touchpad screen by pressing and at the same time. For systems with a standard touchpad, and for the most accurate drive air measurement, use a handpiece pressure gauge (a...

  • Page 18

    16 a-dec 300 delivery systems instructions for use operate / adjust rotational adjustments control head if the control head is too loose or difficult to rotate, use a 5/32" hex key to adjust the tension screw under the control head. Flexarm if the control head begins to drift right or left, use a 1/...

  • Page 19

    86.0092.00 rev f 17 rotational adjustments (continued) tray holder if the tray holder rotation is too tight or too loose, use a 9/64" hex key to adjust the tension: 1. Insert the hex key through the mounting bracket. If necessary, rotate the holder or arm until the key slides completely into the mou...

  • Page 20

    18 a-dec 300 delivery systems instructions for use operate / adjust vertical adjustments if the control head falls or rises rapidly when you flip the master toggle to the off position, complete these steps to adjust the flexarm spring tension: 1. Flip the master toggle to the on position. 2. Load th...

  • Page 21

    86.0092.00 rev f 19 clean / maintain handpiece tubing use the flush toggle to move a high volume of water through the handpiece tubing. To flush the tubing after each patient: 1. Disconnect the handpieces. 2. Hold all of the handpiece tubing that uses water coolant over a sink, cuspidor bowl, or bas...

  • Page 22

    20 a-dec 300 delivery systems instructions for use clean / maintain barrier protection a-dec recommends barrier protection for all applicable touch and transfer surfaces. Touch surfaces are areas that come into contact with hands and become potential cross-contamination points during dental procedur...

  • Page 23

    86.0092.00 rev f 21 utilities and shutoff valves the utilities for a-dec chair-mounted systems are located in the contoured floor box under your chair. To access, lift the cover up and off the floor box frame. Caution when removing or replacing covers, take care not to damage any wiring or tubing. V...

  • Page 24

    22 a-dec 300 delivery systems instructions for use clean / maintain utilities and shutoff valves (continued) the manual water shutoff valves include a screen to prevent larger debris from entering the system. Periodically check and replace this screen to ensure unrestricted water flow. To replace th...

  • Page 25

    86.0092.00 rev f 23 bulb for fiber-optic tubing to replace the bulb in your fiber-optic 5-hole silicone or vinyl tubing: 1. Disconnect the handpiece and quick-connector coupling from the tubing. 2. Pull back the metal handpiece nut. 3. Slide back the metal portion of the handpiece terminal (silicone...

  • Page 26

    24 a-dec 300 delivery systems instructions for use specifications specifications minimum air, water, and vacuum service requirements air: 70.80 l/min (2.50 scfm) at 551 kpa (80 psi) water: 5.68 l/min (1.50 gpm) at 276 kpa (40 psi) vacuum: 339.84 l/min (12 cfm) at 27 kpa (8" of mercury) important for...

  • Page 28

    86.0092.00 rev f copyright 2015 a-dec inc. All rights reserved. Ifucov3 a-dec united kingdom eu authorized representative austin house, 11 liberty way nuneaton, warwickshire cv11 6rz england tel: 0800.Adec.Uk (2332.85) within uk tel: +44.(0).24.7635.0901 outside uk a-dec australia unit 8 5-9 rickett...