A.E.B. L160D User manual - page 3
5
6
7)
“AUX CHANEL - INPUT” INPUT CONNECTORS
8)
"AUX CHANNEL - VOLUME" CONTROL
9)
POWER SWITCH “POWER”
10)
FUSE CARRIER “FUSE”
11)
POWER CABLE SOCKET “MAINS”
Through the RCA phono connectors, this input permits easy connection of CD, DAT,
cassette players, etc.... .
This control adjusts the output volume from the speaker of just the AUX CHANNEL
signal.
This control does not affect the overall volume of the speaker.
This switch can be used to switch the speaker on and off.
Mains fuse housing. Replace only with identical value!
Used for connecting the power cable supplied.
The DSP allows the selection of 8 different equalizations:
For use during live performances with the speaker placed on a stand.
Recommended for musicians and singers.
To listen and use music from MP3 players, CDs, etc.., even in a live situation with the
speaker positioned on a stand. Low and high frequencies are emphasized.
To be positioned on the floor as stage monitor. Low frequencies, emphasized by the
floor, are limited, thus preventing related feedbacks.
Designed for male voices since middle and low frequencies are emphasized
minimizing the feedback due to the proximity effect of the cardioid or hypercardioid
microphones.
Designed for female voices. This preset emphasizes middle and high frequencies,
making voices sharper. The feedback is extremely limited for both cardioid and
hypercardioid microphones.
Designed specifically for use in the studio, or where a flat response curve of the input
signal is required. In this case the output signal turns out to be as faithful as possible
to the original signal.
For all those situations where the music is played in the background. In this case the
low frequencies are extended and enhanced, so as to create a more enveloping
sound even at low sound level.
When the speaker is positioned on a stand, specifically designed for music playback
(MP3, CD etc..). The response curve of the speaker in this preset turns out to be
identical to that of the analogue model L160.
1 - LIVE
2 - PLAYBACK
3 - STAGE MONITOR
4 - MALE SINGER
5 - FEMALE SINGER
6 - STUDIO MONITOR
7 - AUTO LOUDNESS
8 - L160 (Analog)
5
1
3
7
8
2
6
4
1 - LIVE
2 - PLAYBACK
3 - STAGE MONITOR
4 - MALE VOICE
5 - FEMALE VOICE
6 - STUDIO MONITOR
7 - AUTO LOUDNESS
8 - L160 (Analog)
DSP SETUP
TECHNICAL FEATURES
System
Active Bi-ampli
Amplifier type
class D
Power
160W
Frequency response (-10dB)
75 -20000Hz
Crossover
1000 - 10000 Hz 24dB/oct.
Sound pressure (SPL)
116 dB max
Components
1x5” woofer + dome tweeter (coaxial)
1x5”driver - 1” voice coil Neodimio
Input sensitivity LINE/MIC
-32dBu / 0dBu (switch)
Impedance LINE/MIC
Balanced
30K /1K2
Unbalanced
15K /600
Input sensitivity RCA
-12dBu
Impedance RCA
4.7K
Power supply
110-120Vac 50-60Hz
220-240Vac 50-60Hz
Dimension (LxHxP)
200x335x220mm
Weight
5,2Kg
W
W
W
W
W
DSP
Analog Device 56 bits
Audio conversion
24 bit/48kHz S/N=104dB
Volume control
Digital
Equalization
9 preset EQU
2 THREADED INSERTS M5
FOR FIXING BRACKET
2 THREADED INSERTS M5
FOR FIXING BRACKET
WOOFER 5”
0
I
“CAUTION”
TO PREVENT ELECTRICAL SHOCK
DO NOT REMOVE COVER
“AVIS”
RISQUE DE CHOCH ELECTRIQUE
NE PAS OUVRIR
REPLACE FUSE WITH SAME RATE
FUSE
MAINS
POWER
110-120V~ 50-60Hz
(T1A L 250V~)
220-240V~ 50-60Hz
(T500mA L 250V~)
MODULE POWER
CONSUMPTION
160W MAX
Made in China
SIGNAL
ON
LIMITER
LINE
MIC
INPUT SENS
1 - LIVE
2 - PLAYBACK
3 - STAGE MONITOR
4 - MALE VOICE
5 - FEMALE VOICE
6 - STUDIO MONITOR
7 - AUTO LOUDNESS
8 - L160 (Analog)
LEFT
RIGHT
VOLUME
BALANCED
INPUTS
INPUTS
AUX CHANNEL
DSP SETUP
AUX VOLUME
L160D
LINK
d
B
TECHNOLOGIES
WOOFER 5” +
DOME TWEETER
COAXIAL
L160D
TECHNOLOGIES
REFLEX HOLES
HANDLE
30° PLANE
DIGITAL
AMPLIFIER
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in
E3 (or lower E2, E1) Electromagnetic environments.