A.H. Systems AK-26G Operation Manual

Manual is about: Antenna kit

Summary of AK-26G

  • Page 1

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 1 ak-26g antenna kit operation manual.

  • Page 2

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 2 table of contents warranty 3 introduction 4 general information 5 optional equipment 8 formulas 9 maintenance 10

  • Page 3

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 3 warranty information a.H. Systems inc., warrants that our antennas, sensors and probes will be free from defects in materials and workmanship for a period of three (3) years. All other products delivered under contract will b...

  • Page 4

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 4 introduction specifications model number frequency range typical correction factor (db/m) sas-510-2 290 mhz – 2000 mhz 14 to 32 sas-542 20 mhz – 330 mhz 9 to 23 sas-550-1b 9 khz – 60 mhz -1 to 3 sas-560 20 hz – 2 mhz 18 to 15...

  • Page 5

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 5 general information intended purposes this equipment is intended for general laboratory use in a wide variety of industrial and scientific applications, and designed to be used in the process of generating, controlling and me...

  • Page 6

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 6 sas-542 biconical antenna 20 mhz - 330 mhz the biconical antenna consists of the sas-542 balun assembly and two folding biconical elements. Operation: attach the balun assembly to the tripod thru the screw hole in the balun a...

  • Page 7

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 7 impedance (10 k ohm or greater) input. Calibrations for both inputs are provided. Current probes bcp-510 lf current probe 20 hz - 1 mhz bcp-511 hf/vhf current probe 100 khz - 100 mhz the current probes come ready for use. Ope...

  • Page 8

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 8 pam-0126 with an sac-26g-0.5 pam-0126 preamplifier 1 ghz – 26.5 ghz the preamplifier will increase the system sensitivity 30 db and is recommend for the sas-510-2, sas-530,542 and sas-571. An optional short length cable (sac-...

  • Page 9

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 9 antenna formulas and calculations e-field antennas add antenna factor plus cable loss to receiver reading in dbuv to convert to field strength in dbuv/meter. Field strength(dbuv/m) = sa(dbuv) + af(db) + cable loss (db) loop a...

  • Page 10

    A.H. Systems ak-26g antenna kit  a.H. Systems inc. – january 2005 rev a 10 maintenance to ensure reliable and repeatable long-term performance, annual re-calibration of your antennas, preamplifiers and current probes by a.H. Systems experienced technicians is recommended. Our staff can calibrate al...