- DL manuals
- A.H. Systems
- Antenna
- SAS-544
- Operation Manual
A.H. Systems SAS-544 Operation Manual
Summary of SAS-544
Page 1
A.H. Systems sas-544 high field biconical antenna sas-544 biconical antenna operation manual a.H. Systems inc. – may 2014 rev d 1.
Page 2
A.H. Systems sas-544 high field biconical antenna table of contents introduction introduction ............................................................................................................. 3 intended purposes................................................................................
Page 3
A.H. Systems sas-544 high field biconical antenna introduction the sas-544 biconical antenna is designed with a coaxial wound balun for increased power capability and intended for both transmitting and receiving high electromagnetic rf fields. This biconical antenna may be used for radiating immunit...
Page 4
A.H. Systems sas-544 high field biconical antenna intended purposes the biconical antenna is intended for general laboratory use in a wide variety of industrial and scientific applications and has been designed to be used in the process of generating, controlling and measuring high levels of electro...
Page 5
A.H. Systems sas-544 high field biconical antenna optional equipment the following is a recommend accessory list for the sas-543 high power biconical antenna: connecting accessories: sac-211 standard 3 meter n(m) to n(m) rf cable made with rg-214/u. Other cable types available upon request. Adapters...
Page 6
A.H. Systems sas-544 high field biconical antenna operating instructions assembly instructions the sas-544 biconical antenna is shipped with the elements detached from the balun. Simply remove the elements from the shipping container and attach the elements to the balun assembly. Mounting instructio...
Page 7
A.H. Systems sas-544 high field biconical antenna operating instructions once the antenna is mounted to a mast or tripod, connect an n-type coaxial cable from the antenna to a receiver or rf generator. The cable should be matched to 50 ohms, relatively low loss and adequately shielded against leakag...
Page 8
A.H. Systems sas-544 high field biconical antenna specifications electrical specifications frequency range .......................................................................20 mhz – 300 mhz antenna factor......................................................................................6 to ...
Page 9
A.H. Systems sas-544 high field biconical antenna typical data a.H. Systems inc. – may 2014 rev d 9.
Page 10
A.H. Systems sas-544 high field biconical antenna calculations emissions testing individual calibration data for the log periodic antenna is supplied at appropriate distances (3, and 10 meter) to comply with various emissions test requirements. For emissions measurements, add antenna factor plus cab...
Page 11
A.H. Systems sas-544 high field biconical antenna typical conversion formulas log -> linear voltage field strength & power density db v to volts v = 10 ((dbv – 120) / 20) db v/m to v/m v/m = 10 (((db v/m) -120) / 20) volts to db v db v = 20 log(v) + 120 v/m to db v/m db v/m = 20 log(v/m) + 1...
Page 12
A.H. Systems sas-544 high field biconical antenna maintenance maintenance procedures proper antenna maintenance should include: visual inspection of rf connectors check for bent and loose elements check for loose or missing hardware corrosion near the element joints at least once a month it is a goo...
Page 13
A.H. Systems sas-544 high field biconical antenna warranty information a.H. Systems inc., warrants that our antennas, sensors and probes will be free from defects in materials and workmanship for a period of three (3) years. All other products delivered under contract will be warranted for a period ...