A-Line Acoustics ELIJAH2K-B Owner's Manual - Owner’S Manual
– 7 –
AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
ELIJAH2K-B Line Array System
11.
Speakon Output 1 - Connect to Line Array Speakon input to deliver signal to line array speaker.
12.
Speakon Output 2- Connect to Speakon input of EJW115X-B unit to transmit signal to second ELIJAH unit.
EJ2003-B Rear Panel
1. Speakon Input 1 - Connect to Subwoofer Speakon output to deliver signal to line array speaker.
2.
Speakon Output 1 - Connect to auxiliary line array or to other speaker if necessary.
Installation Instructions
1. Position all speakers in the area in which they need to be set-up. Place both of the subwoofer cabinets (EJW115A-B &
EJW115X-B) upright with the hole for the mounting pole facing up. Locate their positions in the venue making sure they are
on a level surface for the best support for the arrays.
Note: The system can be set up slightly behind the performer so that the
performer is hearing the same mix as the audience.
2. Insert the included 37" pole into the pole mount hole on the subwoofer cabinet. Position the EJ2003-B array on top of the pole
making sure the complete system is level.
NOTE: The vertical coverage of the EJ2003-B is +/- 5° off of the top and bottom of the
cabinet. A shorter mounting pole may be necessary to keep the array energy aimed to cover audience. This shorter pole is optional
and available from Atlas A-Line Acoustics.
3. Repeat these two steps with the 2nd pair of cabinets.
4. First, connect the included long NL4 speaker cable between the two subwoofer cabinets. Second, connect the short NL4 cables
from the subwoofer cabinet to the 2003 arrays (it does not matter which NL4 female output is used). Connect your signal male XLR
cable to the input of the amp.
5. Turn on the unit power and adjust volume as needed.
6. The system can be dismantled follwing the previous steps in reverse order to ensure proper disconnection and future functionality.
ON
POWER
ON
POWERCON
NEUTRIK NAC3FCA
POWER OUTLET
12A MAXIMUM
PGM SEL
MUTE
CH 1 CH 2
PWR
CLIP
PROT
SIGNAL
INPUT
LOOPING
OUTPUT
VOLUME
Pin 1 Array
Pin 2 Subwoofer
MUTE
12
11
1
2