A-MAX Technology NAPA DAV311 User Manual - page 19
18
8. HANDLING INSTRUCTIONS
Moist
Due to sudden change of outdoor temperature and humidity, any component of
the player which in contact with warm air
may cause moist to form. In this case, the
player may not be able to function
properly. To cure the problem, place the
player under room temperature until it is
able to function again. According to
different conditions, the process may last
for one hour or more. In case if the disc in
the player is affected by moist as well,
use a soft cloth to rub the disc. Starting from the centre, then move outward.
Laser Disc
Never use cracked or bend laser disc.
Laser disc operates at high speed in the player. Cracked or bend disc may
cause damage to the player. Also, please do not try to repair the damaged disc
by using sources like sticky tape or glue. If any strange noise or vibration
occurred, press
“STOP”
immediately to cease the operation.
Storage Instructions
•
Take out any unwanted disc from the player after use.
•
Keep disc away from places with sunlight, high temperature & humidity.
•
Do not put label sticker on the disc.
•
Avoid scratching the surface of the disc.
Maintenance
•
To remove dirt on surface of the disc, always use a soft cloth wet with
water. Be sure the disc is dry before put into the player again.
•
When wiping the disc, start from the centre
and move outward along the boundary.
•
Never use benzene, diluting fluid, disc
cleanser, or anti-static solution.
Moist form within the player