Safety information 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fi...
Table of contents 1 contents introduction ...............................................................1 package contents ...................................................1 features ....................................................................... 2 specifications ............................
2 features features • compliant with hdmi 1.3a, hdcp 1.2 • supports multiplexed hdmi (4) inputs and (1) output • support 4x1 quad multi-viewer and seamless switch • support scaler up, scaler down function • support digital audio format lpcm/ac3/dts • support button, ir, rs-232 etc. Various controlle...
3 specifications specifications • video bandwidth: 2.25gbps • input ports: • 4x hdmi (female type) • 1x 3.5mm port for ir receiver • 1x rs-232 • output ports: • 1x hdmi (female type) • 1x rca • 1x rj45 connector for catx cable to remote unit • 1x utp • 1x coax connector for local spdif audio • 4x 3....
Operation and functions front panel q on/off: power on/off switch. W service: for factory use only. E ir : remote control receiver window. R power led: this red led illuminates when the device is connected to the power supply. T in1, 2, 3, 4 led: these red led illuminates when the output has selecte...
Operation and functions cat receiver q dc 5v: connect from 5v dc power supply into the unit and connect the adaptor to an ac outlet. W ir rx: connect to the ir receiver for ir signal reception. Ensure that remote being used is within the direct line-of-sight of the ir receiver. E ir tx: connect the ...
Connect and operate wideband ir (30khz---60khz) introduction ir blaster (tx): to control the source: plug ir blaster into ir tx port of transmitter unit. Place blaster in front of the ir eye of the source. Ir receiver (rx): to control the source: plug ir receiver into ir rx port of receiver unit. Pl...
Remote control / pc controller user guide remote control q input select button: the quad multi-viewer will select the corresponding input source. The front panel led will indicate the selected input source status. W mode select button: the quad multi-viewer will select the corresponding mode, see th...
Connection diagram diagram optional rack mount bracket model no.: ani-quad-mini-rm 8.
9 rs-232 serial interface rs-232 serial interface for connection to a pc or 3rd party controler 1. Transmission rate: 115200bps 2. Data format: 8 data bits, no parity, 1 start bit and 1 stop bit 3. Flowing control: none also know as 115200,8,n,1 rs-232configuration rs-232 cable is a straight thru ca...
Commands command auction ani-quad-min returns options resolution1. Change resolution to 1080p resolution : 1080p/60 resolution2. Change resolution to 720p resolution : 720p/60 resolution3. Change resolution to 1080i resolution : 1080i/60 resolution4. Change resolution to 1360x768 resolution : 1360x7...
11 end of document terms and conditions of use please read the following terms and conditions carefully before using this hardware, components and software provided by, through or under a-neuvideo, inc (collectively, the “product”). By using installing or using the product, you unconditionally signi...
