1. DL manuals
  2. A-Neu Video
  3. Matrix Switcher
  4. HD-44G
  5. Instruction Manual

A-Neu Video HD-44G Instruction Manual

Manual is about: 4x4 HDMI MATRIX SWITCHER

Summary of HD-44G

  • Page 1

    Audio / video manufacturer hd-44g 4x4 hdmi matrix switcher instruction m anual important warranty information. If you remove the hdmi screw posts, you must use the provided hdmi locking post replacement screws to keep the internal hdmi jack secure. Removing the hdmi screws without installing the hdm...

  • Page 2

    Safety information 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fi...

  • Page 3

    Table of contents a neu video 1 contents introduction & package contents ................................1 features & specifications .................................................2 front panel .............................................................................3 back panel .................

  • Page 4

    2 features & specifications features • (4) hdmi digital source devices matrix switched to (4) hdmi devices • hdmi digital video w/ embedded audio, dvi format and cec/hdcp 1.2 compliant • (7) function key control and worldwide edid modes for hdtv resolutions • link clock rate of 225mhz, supports hdmi...

  • Page 5

    3 front panel front panel q power switch: the power switch turns the unit on and off. The lcm will illuminate red to indicate that the switcher is on and is receiving power. The switcher will remember the last state during a power cycle. When power is removed and resorted, the last configuration wil...

  • Page 6

    4 front panel front panel o function key - off: disables (mutes) video to selected channels for either destination. - press off button followed by any destination channel. - press output destination 1 thru 4. The display will show ”0“ for the selected channel indicating no video is selected. A funct...

  • Page 7

    5 front panel front panel d function key - memory: the system will show stored presets, up to a total of (8). Presets are stored in local memory using source keys 1 thru 4 or destination keys 1 thru 4 as the memory preset location. - configure desired matrices. - press memory button. - press 1 thru ...

  • Page 8

    6 back panel back panel a neu video q dc power inlet: the switcher is fitted with a dc power plug input connector. Ensure that the plug used is of an approved type and is of sufficient current carrying connector capacity with the correct voltage and connector polarity. 12volt dc power supply 3a max ...

  • Page 9

    7 remote control before making any connections to the switcher. Observe the following: • ensure the main voltage supply matches the label on the supplied plug-pack (+/-10%). • ensure that the power switch is off. • ensure that all system grounds (earth) are connected to a common point. • avoid power...

  • Page 10

    8 remote control ir remote custom and data codes (nec standard) how to setup ir codes: model number: hd-44g custom code: 837c power on: 837c a15e power off: 837c a25d all: 837c b04f off: 837c b14e edid: 837c b748 lock: 837c b54a recall: 837c b24d memory: 837c b44b enter: 837c b34c press tv destinati...

  • Page 11

    9 edid function edid function setup edid setup to change the edid setup step 1. Press the edid button the display will show the currently selected edid mode step 2. Press source #1 or #2 button row the button will flash blue and the display will show the current embedded edid status. Step 3. Press t...

  • Page 12

    10 edid function edid function: (7) embedded edid modes mode 1. Fss ® (fast speed start) fast speed start ® mode shortens the startup time of the switcher. Selecting this mode does not force the edid setup to be cancelled. Users may first select one edid mode from mode 2 to 3, and then select mode 1...

  • Page 13

    11 edid function edid function: learning learning edid single to single example: learn destination #4 edid to source #2. Step 1. Press the edid button the button will flash blue and the display will show the current embedded edid status. Step 2. Press the destination #4 button row copy the destinati...

  • Page 14

    12 a neu video ethernet & rs-232 serial interface ethernet / rs-232 serial interface connects a pc or control system version compatible v2.0 for a complete list of commands, please reference external document extended ethernet protocol instruction manual. Example of the commanded string to select in...

  • Page 15

    13 ir extender a neu video note: the external ir jack has voltage on the “ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug). Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off. *** when you plug the exte...

  • Page 16

    14 typical application installing diagram sample connection: using rs-232 serial interface or ir external in to control switch (hd-44g). Note: 1. Controls a projector with a cat5e/6/7 extender: hd-6335t: hdbaset ™ hdmi cat5e/6/7 transmitter hd-6335r: hdbaset ™ hdmi cat5e/6/7 receiver 2. Rs-232 contr...

  • Page 17

    15 typical application installing diagram sample connection: using an audio extractor and arc control box with linked tv return audio to an audio device, controlling a satellite receiver source via hdbaset ™ transmitter (hd-6335t) and hdbaset ™ receiver (hd-6335r). Note: 1. Control a satellite recei...

  • Page 18

    This page is intentionally left blank..

  • Page 19

    This page is intentionally left blank..

  • Page 20

    End of document 18 terms & conditions of use please read the following terms and conditions carefully before using this hardware, components and software provided by, through or under a-neuvideo, inc (collectively, the “product”). By using installing or using the product, you unconditionally signify...