A-Neu Video HD-44L Instruction Manual - page 16
EDID FUNCTION
Press EDID > DESTINATION Button. The LCM will be show LEARNING.
Switcher will LEARN destination EDID and pass the selected source.
NOTE : The already learned EDID cannot be modifi ed. You can only rebuild a new Learning EDID.
For example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes
when you want to remove the learning EDID memory from EPROM.
EDID function : 7x Embedded EDID Modes
Mode 1. FSS
®
(Fast Speed Start)
Fast Speed Start
mode shortens the startup time of the switcher. Selecting
this mode does not force the EDID setup to be cancelled. Users may fi rst
select one EDID mode from mode 2 to 3, and then select mode 1 for fast
speed start.
Mode 2. H24-3D (1080p-24 bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : PCM 2CH
Mode 3. H24-3D-M (1080p-24bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Mode 4. H36-3D (1080p-36 bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : PCM 2CH
Mode 5. H36-3D-M (1080p-36 bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Mode 6. 1280x1024-60Hz (DVI-D)
DVI Support : DVI-D 1280x1024 60Hz
Mode 7. 1920x1200-60Hz (DVI-D)
DVI Support : DVI-D 1920 x 1200 60Hz
14