Safety information 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fi...
Table of contents 1 contents introduction and contents .................................1 features and specifications ................................2 operation controls and functions ................3 application example & ir example .......................4 introduction the ani-hdb70 hdmi extende...
Features & specifications features • transmits at a distance of up to 230 ft. (70m) • one pair as a full functional module, no need for setting dip switches • poe (power over ethernet), either tx or rx powered 12v@2.5a • consumption less than 10w • use single utp/stp lan cable cat5e, 6 or 7 to subst...
Operation controls and functions transmitter 1. Dc in: plug the 12v dc power supply into the unit. 2. Ir out: ir transmitter. 3. Ir in: ir receiver. 4. Hdmi in: hdmi input port. 5. Hdmi signal out: cat5e/6/7 rj-45 ieee-568b 6. Link led: illuminates when the transmitter unit and receiver unit has a v...
4 application example / ir example example ir emitters 56khz cat5e/6/7.
5 end of document terms and conditions of use please read the following terms and conditions carefully before using this hardware, components and software provided by, through or under kvm switch tech, inc (collectively, the “product”). By using installing or using the product, you unconditionally s...
