A.O.M. K1 Use And Maintenance Manual - page 8
USE AND MAINTENANCE MANUAL
Page 8 of 13
®
2.3
TECHNICAL FEATURES
The painting spray gun must be used with a compressor of 5 bar (71 psi) at least. Its design
improves the distribution of the air supplied from the internal holes at very low working
pressures.
ASTURO ORIGINALI MAVES Spa carries out all the necessary tests on the paint spray gun
before delivering it to its customers.
NOZZLE TECHNICAL FEATURE TABLE
2.4
STANDARD AND OPTIONAL COMPONENTS
The spray gun is delivered with the following standard components:
+ 1 - Nylon paint filter.
+ 1 - Dismantling wrench.
+ 1 - Cleaning brush.
+ 1 - 600 cc (18 fl.oz.) nylon or 1000cc al. gravity cup.
+ 1 - Use and maintenance manual.
+ 1 - Declaration of conformity to CE RULINGS.
+ 1 - Warranty certificate.
On request:
+
Nozzles with different measures.
+
Package of 10 paint filters.
+
Connection hoses.
+
Extra 600 cc (18 fl.oz.) nylon gravity cup.
The above technical features are only exemplifying and can vary without prior notice.
FEATURE
VALUE
Air consumption
240Lt/min (c.f.m. 8,5)
Nozzle sizes
1,0 - 1,2 - 1,3 - 1,4 - 1,7 -
1,9 - 2,2 - 2,5
Fan width
290mm (11.4 in.)
Max pressure
5 Bar (71psi)
Operating pressure
4 Bar (57psi)
Weight without cup
475 gr (16.75 oz.)
Tank capacity
600cc (30 fl.oz.)
Air inlet
M 1/4"
Filler
primer
Surface
primer
Basecoat
Metallic
base/ water
base
Clearcoat
Primers
Stains
Wood
filler
Lacquer
Oil-based
paint
Rust proof
coat
Primer
Sealer
Enamel
Hammered-
effect paint
Orange-peel
effect paints
Ø1.2 (0.03 in.)
x
Ø1.3 (0.04 in.)
x
Ø1.4 (0.045 in.)
x
x
x
Ø1.7 (0.05 in.)
x
x
x
Ø1.9 (0.06 in.)
x
x
x
x
Ø2.2 (0.07 in.)
x
Ø2.5 (0.08 in.)
x
NOZZLE
PRODUCT
BODY SHOP
WOODWORKING
METAL PAINTING