A.O. Smith X5+ User Manual

Other manuals for X5+: User Manual
Manual is about: pure&sure

Summary of X5+

  • Page 1

    Size: a5 [148.5 mm (w) x 210 mm (h)] part no.: 333771-000_r0 date: 21-12-2015 with mineralised & purified hot water superior technology for advanced protection. Tm user guide w w w . A o s m i t h i n d i a . C o m e x p e r t c o m p a n y s e r v i c e toll free no.: 1800-103-2468 or sms us: +91 9...

  • Page 3

    Dear customer, congratulations and welcome to a. O. Smith family. We thank you for the trust you have shown in choosing the a. O. Smith water purifier. A. O. Smith water purifier is one of the most advanced ro water purifier available in the market today. It is specially designed keeping in mind tod...

  • Page 4: Contents

    Contents key features of your a. O. Smith & ro water purifier .................................... 01 pre-instruction literature .......................................................................................... 02 general instructions ...........................................................

  • Page 5

    01 hot water at a press of button only ro in india that gives you purified hot water with added minerals at two temperature choices. India's first ro with night assist glow effect guides you to your water purifier at night and makes your kitchen look good. Advance unique patented ssm technology (sid...

  • Page 6: Pre-Instruction Literature

    02 on receipt it is our policy to promote safe delivery of all orders. This product shipment has been thoroughly checked, packed and quality certified before leaving our plant. Visible loss or damage if any of the goods called for on the bill of lading or express receipt are damaged or the quantity ...

  • Page 7: General Instructions

    Safety general instructions these instructions have been written as a guide for the proper installation and operation of your a. O. Smith / ro water purifier. A. O. Smith will not accept any liability where these instructions have not been followed. However, for your safety and to avoid damage cause...

  • Page 8: Introduction

    A. O. Smith / ro water purifier has 7 stages of purification system, wherein the water is passed through the various stages and progressively filtered to get purified water which is stored in the inbuilt storage tank. Stage 1 – pre-filter the pre-filter is used to remove physical contaminants such a...

  • Page 9

    05 stage 3 – pre carbon filter the pre carbon filter uses carbon block with high adsorbtion capacity which reduces harmful chemicals including pesticides, volatile organic compounds, residual chlorine etc., from water. It also adsorbs bad taste and odour causing organic compounds from water. Stage 4...

  • Page 10: Product Overview

    Product overview figure 2 06 a. O. Smith ro water purifier led display panel indicators front view back view water level indicator top cover led display panel indicators water level indicator child lock button hot water faucet main body hot water tank drip tray cover normal water faucet faucet lever...

  • Page 11

    07 front view back view figure 3 a. O. Smith ro water purifier led display panel indicators water level indicator top cover led display panel indicators water level indicator hot water outlet main body hot water tank drip tray cover normal water outlet front cover removable drip tray rear cover over...

  • Page 12: Function of Indicators

    This indicates flushing is in progress. Every time the water purification process is activated the auto flushing mechanism cleans the ro membrane. It enhances the life of ro membrane. Note: call a. O. Smith customer care centre if you notice continuous blinking of auto flush indicator. Auto flush in...

  • Page 13

    This indicates the temperature of water inside the hot water tank and displays the error codes incase of fault in the water purifier. Note: call a. O. Smith customer care centre if you notice any error messages (refer page 27). Temperature indicator 09 this indicates that the min-tech, silver activa...

  • Page 14

    10 this purifier is capable of dispensing warm water (45°c) and hot water (80°c) as per customer desire. This button is used to heat the water inside the hot water tank of the purifier. Water heating button as a safety feature while dispensing hot water, the purifier has a built-in child lock featur...

  • Page 15: Water Flow

    Figure 4 water flow 11 figure 5 dispensing solenoid valve dispensing solenoid valve normal water outlet hot tank hot water outlet check valve overflow water level 1 sensor level 2 sensor storage tank low pressure switch flow restrictor tap water ball valve inlet water 3-way joint flush solenoid valv...

  • Page 16: Electrical Diagram

    Figure 6 figure 5 electrical diagram 12 figure 7 reset pcb led1 led2 night assist led water leakage pcb flush sv inlet sv pump smps p n g 150v - 300v 50 hz 1- φ ac supply terminal block hot water tank eco temperature sensor lower level sensor low pressure switch upper level sensor main control board...

  • Page 17: Safety Precautions

    Safety precautions electrical safety figure 8 power plug must be used with a grounded 230v outlet. (figure 8) 230v caution figure 9 do not pull out or touch power plug with wet hands to avoid electrical shock. (figure 10) even though these products are designed keeping highest safety standards in mi...

  • Page 18

    14 product should be installed only by a. O. Smith company authorised service technician. (figure 12) figure 12 caution heater caution figure 13 do not connect hot water to the product. (figure 13) figure 14 connect the product to the power supply only with the plug that is provided with the purifie...

  • Page 19

    Caution figure 19 do not drink the water from the reject water tube. Reject water should not be consumed in any form. (figure 19) when it is used figure 17 figure 18 do not put heavy objects on the product. (figure 17) do not put foreign objects or hand inside the purifier. (caution is needed, espec...

  • Page 20: How to Use

    On 16 how to use figure 20 figure 21 1. Turn on the water connection through the ball valve. (figure 20) 1. Turn on the water connection through the ball valve. (figure 21) figure 22 2. Switch on the power supply and press the power button of the purifier. (figure 22) figure 23 2. Switch on the powe...

  • Page 21

    17 figure 24 1. To dispense normal water from the storage tank, push and hold the normal water faucet lever. (figure 24) to dispense normal water 2. To dispense normal water continuously, lift up the normal water faucet lever for the continuous water flow. To stop the water flow, pull down the norma...

  • Page 22

    18 this purifier is capable of dispensing at two temperature choices warm water (45°c) and hot water (80°c). Setting to warm/hot water temperature. Figure 27 1. Press the water heating button once. This will set temperature to 45°c which will be displayed on led. 2. When water heating button glows, ...

  • Page 23

    19 figure 29 1. Press and hold the water heating button for 3 seconds. This will set temperature to 80°c which will be displayed on led. 2. When water heating button glows, it indicates heating has started. The led display shows the current water temperature. 3. Once the temperature reaches 80°c, th...

  • Page 24

    20 note: hot water flows for 3.5 minutes (approx.) and stops automatically, when hot water button is not pressed to stop water flow. A. O. Smith a. O. Smith 2. To dispense hot water from the storage tank, press the hot water button once, the hot water button led glows. To stop the water flow, press ...

  • Page 25

    21 danger hot water is dangerous, especially for children, aged or the disabled. The water purifier allows you to control the temperature of your hot water. Water temperatures over 52°c can cause severe burns due to scalding. Hot hot scalding to drain water completely from the purifier, use only the...

  • Page 26: Draining Drip Tray

    Draining drip tray figure 36 figure 38 1. Remove the drip tray assembly by pulling forward. (figure 36) figure 37 1. Remove the drip tray assembly by pulling forward. (figure 37) we have provided removable drip tray with the product. In case there is spillage of water, it gets collected in drip tray...

  • Page 27

    Figure 39 figure 40 figure 41 3. Clean the surface of water tray with a soft cloth. (figure 39) 4. Re-attach the drip tray assembly into the purifier. (figure 41) 4. Re-attach the drip tray assembly into the purifier. (figure 40) 23 a. O. Smith a. O. Smith.

  • Page 28: How to Maintain Your Product

    How to maintain your product figure 42 do not splash water directly or clean with benzene, pesticides, thinner, alcohol, etc., but use a soft, dry cloth to clean the purifier. (figure 42) ro figure 43 replace filters regularly according to the replacement indications. This must be done only by a. O....

  • Page 29: Troubleshooting

    25 troubleshooting problems check-up solution change in water taste. Has the purified water drain the stored water been stored in the tank the storage tank through for long time? From faucet. Filters / membrane may call customer care centre require replacement. For replacement. Has the raw water qua...

  • Page 30

    26 buzzer beeps and water leak alarm is switch off the water power led blinks triggered indicating purifier and call customer continuously. That there is a leakage care centre. Inside the purifier. Buzzer beeps and overflow alarm is switch off the water tank full led blinks triggered indicating puri...

  • Page 31

    27 error messages and actions scpa change led glows. Scpa change indicator call customer care centre glows when 10% life is for filters replacement. Remaining indicating that it is time to replace filters. Buzzer beeps for scpa change alarm is switch off the water 10 times and scpa triggered indicat...

  • Page 32: Technical Specifications

    28 * flow rate depends on variable factors such as feed water pressure, feed water characteristics and condition of the membranes and filters. ** recovery and tds reduction percentages also depend on variable factors such as life and condition of the membranes and filters, feed water pressure, feed ...

  • Page 33

    Note: please go through detailed warranty terms and conditions mentioned on page no. 33 to 36. 29 parameter limits total dissolved solids (tds) up to 2000 ppm total hardness up to 500 ppm turbidity up to 5 ntu iron 0.3 ppm (max.) feed water pressure 7 psi to 30 psi feed water temperature 5°c to 45°c...

  • Page 34: Faqs

    Faqs 30 1. What is a. O. Smith / ro water purifier? A. O. Smith / ro is advanced 7 stages ro from a. O. Smith. It is 100% ro with no bypass of water for maximum purity. It is double purified by scmt (silver charged membrane technology) and required essential minerals are added back to water. It has ...

  • Page 35

    31 11. What is scmt? Silver charged membrane technology is double purification of water after the ro membrane to ensure absolute purity. 12. What is ro+scmt? It is unique double purification process to ensure absolute purity of water. 13. Does it retain minerals? Yes, a. O. Smith / ro water purifier...

  • Page 36

    32 22. What is the digital display in a. O. Smith / ro water purifier? Digital display in a. O. Smith / ro water purifier indicates 1) tank full 2) flushing of ro membrane 3) change of scpa (sediment and pre carbon) 4) change of ro membrane, silver activated post carbon, min-tech and scmt 5) tempera...

  • Page 37

    33 a. O. Smith india water products private limited (“a. O. Smith or company”) warrants this water purifier (“product”) against the defects arising from faulty design, workmanship and material subject to the following terms and conditions: 1. All electrical and functional parts are warranted for one...

  • Page 38

    34 10. If an identical model is no longer available due to a change in law, regulation, or standard, a. O. Smith will replace the product with one having a similar capacity and input. In these instances, the customer will have the option of paying the difference between what was paid for the origina...

  • Page 39

    35 f. If product serial number is missing or altered. G. If damage is caused by pest infestation. H. If the input water emits pungent smell. I. If the input water is discoloured. J. If product is used for commercial purpose. 17. Ro membrane will be covered for any material damage, malfunctioning und...

  • Page 40

    Jurisdiction the courts of competent jurisdiction at bangalore, karnataka shall have exclusive jurisdiction over all matters arising out of any disputes in relation to the product. 1. The customer may be offered a yearly service contract (phcp*) at the prevailing company rates and terms. 2. In case ...

  • Page 41: Warranty Card

    Warranty card customer copy to be retained by the customer dealer’s stamp and signature invoice number: ______________________________ dated: _________________________ unit serial number: __________________________________ model: _________________________ capacity: ______________________ customer's ...

  • Page 42: Service and Maintenance

    Service and maintenance for service needs: please contact our a. O. Smith toll free number : 1800-103-2468 sms us : +91 99410 32468 e-mail us : aosmithcs@aosmithindia.Com registered office a. O. Smith india water products private limited (formerly known as a. O. Smith india water heating private lim...

  • Page 43: Disclaimer

    39 disclaimer disclaimer power of 1 is limited to: 1. Available in selected cities, for details log on to www.Aosmithindia.Com or call at 1800-103-2468. 2. Calls registered with a. O. Smith customer care centre on working days before 4 pm. 3. Within city municipal limits only. 4. Restricted to servi...

  • Page 44

    Manufactured by a. O. Smith india water products private limited (formerly known as a. O. Smith india water heating private limited) plot no. 300, phase-2, kiadb industrial area, harohalli, kanakapura taluk, ramanagara district - 562 112, karnataka, india. Toll free: 1800-103-2468  website: www.Aos...