A.W. Communication Systems DRC1 Configuration Handbook - page 8
The Menu key has two functions. On first press it engages the menu system. Once in the
menu system, the menu key acts as carriage return to agree and select the values set in the
options field. Exiting the menu area causes the selected values to be stored.
The scroll up and down keys move through the menu options, and pressing menu selects the
desired option.
The clear key steps back one place in the selection process. For example, if tone set has been
selected, then operation of the clear key will step back one place to sellcall options.
The volume up and down keys are used when configuring audio related options.
Menu Structure.
User Menu
Installation Menu
(may be pin code protected)
Menus In Order Of Presentation
User Menu
Selcall Status
Sets the outgoing status in selcall signalling
Set Radio Channel
Used in DS32 mode only
Headset Volume
Range 0 to 99
Handset Volume
Range 0 to 99
Default speaker Vol
Range 0 to 99
Keypad Beeps
Click-Pip-Off
Set Time
Hrs – Mins
Set date
DD – MM – YY
Display Contrast
Range 0 to 9
Set Microphone Source
Internal – External
Lamp & Button test
Reports on display buttons pressed
Set Ident alpha tags
Input alpha tags on a per ident basis
Set Status alpha tags
Input alpha tags on a per status basis
Set Channel alpha tag
Input alpha tag for channel
Set Default Channel
Sets the power- up channel
F Key Channels
Used in M80 mode only
Software Version
Reports presently installed software version number
Install Menu
Emulation Mode
Determines base station keying options
Set Mic Gain
Use Vol UP/Down to set selected microphone gain.
Selcall Tone set
Select tone set to be used
Tone length
Set in mS the selcall tone length
Selcall ident size
Set number of digits (variable) in ident
Selcall status size
Set number of digits (variable) in status
Selcall codes
Sub menu for setting all selcall codes
Set Rx Call code
Set RX emergency code
Set RX ack to TX