A1 Touch AOD 170 User Manual - Troubleshooting
Page 7
1.8
Contents of the Retail Package
Monitor
AC/DC Adapter (not 24V) Power cord
VGA Cable (option) DVI Cable
Touch Driver (option)
1.9
Troubleshooting
TO REDUCE THE RISK OF ELECTRIC SHOK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONELLE.
• The monitor does not respond after you turn on the system.
• Make sure that the monitor is turned on.
• Turn off the power and check the monitor’s power cord, AC adapter,
• and signal cable for proper connection.
• Appear the “ No Input the Signal"
• Check the connecting of the audio cable between the monitor and the computer.
• Appear the “ Input Not the Supported"
• Input signal are insuperable, reset the video mode.
• The appearance is not at the screen center.
• Use “AUTO ADJUST”, refer to the Controls section.
• The characters on the screen are too dim or too bright
• Choose fit color temperature, use “AUTO COLOUR ADJUST or manually adjust
• “RGB ADJUSTMENT, refer to the Control section.