1 radio wireless keyboard user ’s guide brand : a4tech model: rfkb-23.
2 this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal communications ...
3 getting ready 1. Turn off the power of your computer. 2. Remove the existing keyboard (and mouse for the a4tech® wireless desktop). 3. Install the aa alkaline batteries in the wireless keyboard. Remove the battery compartment cover on the bottom of the keyboard by squeezing the cover in from the t...
4 setting up the keyboard or wireless desktop 1. Make sure that your computer is turned off. 2. Connecting the receiver’s keyboard cable: (a) when connecting to an ibm at keyboard port, use the 5-pin din connector already attached to the keyboard cable. (b) when connecting to a ps/2-style with adapt...
5 changing the wireless mouse id code you can use a new wireless mouse on your computer without changing the radio receiver; you just need to change the id code. Refer to the following: 1. Press [shift + alt + f11] or [shift + alt + f12] to call up the wireless mouse id code window. 2. Move the wire...
