- DL manuals
- Aaeon
- Touch Panel
- ACP-1074
- User Manual
Aaeon ACP-1074 User Manual
Summary of ACP-1074
Page 1
Last updated: february 4, 2016 acp-1074 infotainment multi-touch panel pc user’s manual 2 nd ed www.Texim-europe.Com.
Page 2
Preface ii info tain me nt m ult i-t ou ch p an el pc ac p- 1074 copyright notice this document is copyrighted, 2016. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual...
Page 3
Preface iii info tain me nt m ult i-t ou ch p an el pc ac p- 1074 acknowledgement all other products’ name or trademarks are properties of their respective owners. Microsoft windows is a registered trademark of microsoft corp. Intel, pentium, celeron, and xeon are registered trademarks of intel corp...
Page 4
Preface iv info tain me nt m ult i-t ou ch p an el pc ac p- 1074 packing list before setting up your product, please make sure the following items have been shipped: item quantity acp-1074 1 rj-45 com port cable 2 power adapter 1 vesa mount 1 set panel mount 1 set product dvd with user’s manual (in ...
Page 5
Preface v info tain me nt m ult i-t ou ch p an el pc ac p- 1074 about this document this user’s manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector set...
Page 6
Preface vi info tain me nt m ult i-t ou ch p an el pc ac p- 1074 safety precautions please read the following safety instructions carefully. It is advised that you keep this manual for future references 1. All cautions and warnings on the device should be noted. 2. All cables and adapters supplied b...
Page 7
Preface vii info tain me nt m ult i-t ou ch p an el pc ac p- 1074 17. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic component...
Page 8
Preface viii info tain me nt m ult i-t ou ch p an el pc ac p- 1074 fcc statement this device complies with part 15 fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including ...
Page 9
Preface ix info tain me nt m ult i-t ou ch p an el pc ac p- 1074 china rohs requirements (cn) 产品中有毒有害物质或元素名称及含量 aaeon panel pc/ workstation 部件名称 有毒有害物质或元素 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 ○ ○ ○ ○ ○ ○ 外部信号 连接器及线材 ○ ○ ○ ○ ○ ○ 外壳 ○ ○ ○ ○ ○ ○ 中央处理器 与内存 ○ ○ ○ ○ ○ ○ 硬...
Page 10
Preface x info tain me nt m ult i-t ou ch p an el pc ac p- 1074 china rohs requirement (en) poisonous or hazardous substances or elements in products aaeon panel pc/ workstation component poisonous or hazardous substances or elements lead (pb) mercury (hg) cadmium (cd) hexavalent chromium (cr(vi)) p...
Page 11
Preface xi info tain me nt m ult i-t ou ch p an el pc ac p- 1074 table of contents chapter 1 - product specifications ........................................................................................ 1 1.1 specifications ...........................................................................
Page 12
Preface xii info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.3.14 ddr3l sodimm slot (dimm1)........................................................ 23 2.3.15 half size minicard slot (pcie1) ........................................................ 23 2.3.16 pci-e full size minicard slot (pcie2...
Page 13
Preface xiii info tain me nt m ult i-t ou ch p an el pc ac p- 1074 appendix b - i/o information .............................................................................................. 63 b.1 i/o address map .........................................................................................
Page 14
Info tain me nt mu lti- to uc h pa nel pc ac p- 1074 chapter 1 chapter 1 - product specifications www.Texim-europe.Com.
Page 15
Chapter 1 – product specifications 2 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 1.1 specifications system processor intel ® atom™ j1900/n2807 processor system memory 204-pin ddr3l 1333 sodimm x 1, up to 8 gb (pre-installed 2 gb) lcd/crt controller lvds i/o port usb 3.0 x 1 usb 2.0 x 3 lan ...
Page 16
Chapter 1 – product specifications 3 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 adjustments in the intel hd graphics control panel. To do this, go to display -> color, adjust contrast from the default 50 to 49 or 51. Windows ® 7 32/64-bit linux by fedora kernel 2.6.3 up mechanical construc...
Page 17
Chapter 1 – product specifications 4 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 power supply dc input dc 12 v lcd display type 7” wxga led max. Resolution 1024 x 600 max colors 262 k luminance (cd/m 2 )4 250 nits contrast ratio 700:1 viewing angle 150° (h), 145° (v) touchscreen type usb re...
Page 18
Info tain me nt m ult i-t ou ch p an el pc ac p- 1074 chapter 2 chapter 2 – hardware information www.Texim-europe.Com.
Page 19
Chapter 2 – hardware information 6 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.1 dimensions v 0 1 2 3 g v 0 1 g v 0 1 2 3 g v 0 1 g v 0 1 2 3 g v 0 1 g v 0 1 2 3 g v 0 1 g www.Texim-europe.Com.
Page 20
Chapter 2 – hardware information 7 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 v 0 1 2 3 g v 0 1 g v 0 1 2 3 g v 0 1 g www.Texim-europe.Com.
Page 21
Chapter 2 – hardware information 8 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 with vesa mount v 0 1 2 3 g v 0 1 g www.Texim-europe.Com.
Page 22
Chapter 2 – hardware information 9 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 with wall mount v 0 1 2 3 g v 0 1 g www.Texim-europe.Com.
Page 23
Chapter 2 – hardware information 10 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.2 list of jumpers please refer to the table below for all of the board’s jumpers that you can configure for your application label function jp1 at/atx mode selection jp2 lvds bklt control selection jp3 lvds p...
Page 24
Chapter 2 – hardware information 11 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.2.1 at/atx mode selection (jp1) atx mode (default) at mode pin function 1-2 atx mode (default) 2-3 at mode 2.2.2 lvds bklt control selection (jp2) vr mode pwm mode (default) pin function 1-2 vr mode 2-3 pwm m...
Page 25
Chapter 2 – hardware information 12 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.2.4 lvds bklt power selection (jp4) 12 v 5 v (default) pin function 1-2 12 v 2-3 5 v (default) 2.2.5 clear cmos jumper (jp5) normal (default) clear cmos pin function 1-2 normal (default) 2-3 clear cmos 2.2.6 ...
Page 26
Chapter 2 – hardware information 13 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.2.7 dry and wet contact digital output power selection (jp7) wet contact digital output dry contact digital output (default) pin function 1-2 wet contact digital output 2-3 dry contact digital output (default...
Page 27
Chapter 2 – hardware information 14 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.3 list of connectors please refer to the table below for all of the board’s connectors that you can configure for your application label function cn1 hdmi display cn2 usb 3.0 connector cn4 com2 rs-232/422/485...
Page 28
Chapter 2 – hardware information 15 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.3.1 hdmi display (cn1) pin pin name signal type signal level 1 hdmi_tx2+ diff 2 gnd gnd 3 hdmi_tx2- diff 4 hdmi_tx1+ diff 5 gnd gnd 6 hdmi_tx1- diff 7 hdmi_tx0+ diff 8 gnd gnd 9 hdmi_tx0- diff 10 hdmi_clk+ di...
Page 29
Chapter 2 – hardware information 16 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.3.2 usb 3.0 connector (cn2) pin pin name signal type signal level 1 +5v pwr +5v 2 usb_d- diff 3 usb_d+ diff 4 gnd gnd 5 usb3.0 rx- diff 6 usb3.0 rx+ diff 7 gnd gnd 8 usb3.0 tx- diff 9 usb3.0 tx+ diff 2.3.3 co...
Page 30
Chapter 2 – hardware information 17 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 8 dtr rx 2.3.4 com3 rs-232 i/f (cn16) pin rs-232 1 dcd 2 dsr 3 rx 4 rts 5 tx 6 cts 7 dtr 8 ri 9 gnd 2.3.5 com1 rs-232/422/485 connector (cn17) www.Texim-europe.Com.
Page 31
Chapter 2 – hardware information 18 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 pin rs-232 rs-422 rs-485 1 dsr 2 rts 3 gnd 4 tx rx+ 5 rx tx+ data+ 6 dcd tx- data- 7 cts 8 dtr rx 2.3.6 dry and wet contact digital input (cn23) www.Texim-europe.Com.
Page 32
Chapter 2 – hardware information 19 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 dry contact wiring wet contact wiring digital input voltage range max min 10 ~ 25 v 5 v pin pin name signal type signal level 1 digital input 3 input dry (5v) wet (3~30v) * www.Texim-europe.Com.
Page 33
Chapter 2 – hardware information 20 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2 digital input 2 input dry (5v) wet (3~30v) 3 digital input 1 input dry (5v) wet (3~30v) 4 digital input 0 input dry (5v) wet (3~30v) 5 wet contact power pwr 3~30v 2.3.7 dry and wet contact digital output (cn2...
Page 34
Chapter 2 – hardware information 21 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.3.8 rj-45 ethernet port (cn26) pin pin name signal type signal level 1 mdi0+ diff 2 mdi0- diff 3 mdi1+ diff 4 mdi2+ diff 5 mdi2- diff 6 mdi1- diff 7 mdi3+ diff 8 mdi3- diff 2.3.9 rj-45 ethernet port (cn27) pi...
Page 35
Chapter 2 – hardware information 22 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 7 mdi3+ diff 8 mdi3- diff 2.3.10 usb 2.0 port 1 connector (usb1) pin pin name signal type signal level 1 +5v pwr +5v 2 usb_d- diff 3 usb_d+ diff 4 gnd gnd 2.3.11 usb 2.0 port 2 connector (usb2) pin pin name sig...
Page 36
Chapter 2 – hardware information 23 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.3.13 lan1 connector (cn37) pin signal pin signal 1 mdi0+ 2 mdi0- 3 mdi1+ 4 mdi2+ 5 mdi2- 6 mdi1- 7 mdi3+ 8 mdi3- 2.3.14 ddr3l sodimm slot (dimm1) standard specifications 2.3.15 half size minicard slot (pcie1)...
Page 37
Chapter 2 – hardware information 24 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 10 nc 11 nc 12 nc 13 nc 14 nc 15 gnd gnd 16 nc 17 nc 18 gnd gnd 19 nc 20 nc 21 gnd gnd 22 nc 23 msata rx+ diff 24 +3.3v pwr +3.3v 25 msata rx- diff 26 gnd gnd 27 gnd gnd 28 +1.5v pwr +1.5v 29 gnd gnd 30 smb_clk...
Page 38
Chapter 2 – hardware information 25 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 37 gnd gnd 38 nc 39 +3.3v pwr +3.3v 40 gnd gnd 41 +3.3v pwr +3.3v 42 nc 43 nc 44 nc 45 nc 46 nc 47 nc 48 +1.5v pwr +1.5v 49 nc 50 gnd gnd 51 nc 52 +3.3v pwr +3.3v 2.3.16 pci-e full size minicard slot (pcie2) pi...
Page 39
Chapter 2 – hardware information 26 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 8 nc 9 gnd gnd 10 nc 11 nc 12 nc 13 nc 14 nc 15 gnd gnd 16 nc 17 nc 18 gnd gnd 19 nc 20 nc 21 gnd gnd 22 nc 23 pcie rx- diff 24 +3.3v pwr +3.3v 25 pcie rx+ diff 26 gnd gnd 27 gnd gnd 28 +1.5v pwr +1.5v 29 gnd g...
Page 40
Chapter 2 – hardware information 27 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 35 gnd gnd 36 nc 37 gnd gnd 38 nc 39 +3.3v pwr +3.3v 40 gnd gnd 41 +3.3v pwr +3.3v 42 nc 43 nc 44 nc 45 nc 46 nc 47 nc 48 +1.5v pwr +1.5v 49 nc 50 gnd gnd 51 nc 52 +3.3v pwr +3.3v 2.3.17 com-to-rj-45 converter ...
Page 41
Chapter 2 – hardware information 28 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 pin rs-232 rs-422 rs-485 1 dcd tx- data- 2 rxd tx+ data+ 3 txd rx+ 4 dtr rx- 5 gnd 6 dsr 7 rts 8 cts 9 na www.Texim-europe.Com.
Page 42
Chapter 2 – hardware information 29 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 2.4 mounting the panel step 1: get the wallmount brackets and sponge ready. Step 2: remove the six screws (three on each side) at the back and place the wallmount brackets onto the panel. Secure the brackets wi...
Page 43
Chapter 2 – hardware information 30 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 step 5: attach the mounting clips to the four fillisters on the wallmount brackets and tighten the four m4x60 screws to secure the brackets 2 wall mounting clip 1 2 m4x60 screw www.Texim-europe.Com.
Page 44
Info tain me nt mu lti- to uc h pa nel pc ac p- 1074 chapter 3 chapter 3 - ami bios setup www.Texim-europe.Com.
Page 45
Chapter 3 – ami bios setup 32 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.1 system test and initialization the system uses certain routines to perform testing and initialization. If an error, fatal or non-fatal, is encountered, a few short beeps or an error message will be outputted. The ...
Page 46
Chapter 3 – ami bios setup 33 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.2 ami bios setup the ami bios rom has a pre-installed setup program that allows users to modify basic system configurations, which is stored in the battery-backed cmos ram and bios nvram so that the information is r...
Page 47
Chapter 3 – ami bios setup 34 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.3 setup submenu: main www.Texim-europe.Com.
Page 48
Chapter 3 – ami bios setup 35 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4 setup submenu: advanced www.Texim-europe.Com.
Page 49
Chapter 3 – ami bios setup 36 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.1 advanced: cpu configuration options summary: intel virtualization technology disabled enabled optimal default, failsafe default eist disabled enabled optimal default, failsafe default www.Texim-europe.Com.
Page 50
Chapter 3 – ami bios setup 37 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.2 advanced: ide configuration options summary: sata mode ide mode ahci mode optimal default, failsafe default www.Texim-europe.Com.
Page 51
Chapter 3 – ami bios setup 38 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.3 advanced: usb configuration options summary: legacy usb support enabled optimal default, failsafe default disabled auto enables bios support for legacy usb support. When enabled, usb can be functional in legacy ...
Page 52
Chapter 3 – ami bios setup 39 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.4 advanced: hardware monitor www.Texim-europe.Com.
Page 53
Chapter 3 – ami bios setup 40 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.5 advanced: dynamic digital io configuration options summary: gpo0 direction [output] output level low hi optimal default, failsafe default gpo1 direction [output] output level low hi optimal default, failsafe def...
Page 54
Chapter 3 – ami bios setup 41 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.6 advanced: power management options summary: power mode atx type optimal default, failsafe default at type select power supply mode. Ac power loss last state optimal default, failsafe default power on power off s...
Page 55
Chapter 3 – ami bios setup 42 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.7 advanced: sio configuration www.Texim-europe.Com.
Page 56
Chapter 3 – ami bios setup 43 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.7.1 sio configuration: serial port 1 configuration options summary: use this device disabled enabled optimal default, failsafe default en/disable serial port (com) possible: use automatic settings optimal default,...
Page 57
Chapter 3 – ami bios setup 44 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.4.7.2 sio configuration: serial port 2 configuration options summary: use this device disabled enabled optimal default, failsafe default en/disable serial port (com) possible: use automatic settings optimal default,...
Page 58
Chapter 3 – ami bios setup 45 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.5 setup submenu: chipset www.Texim-europe.Com.
Page 59
Chapter 3 – ami bios setup 46 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.5.1 chipset: north bridge www.Texim-europe.Com.
Page 60
Chapter 3 – ami bios setup 47 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.5.1.1 display control configuration options summary: options summary: dvmt pre-allocated 64m optimal default, failsafe default 96m 128m 160m 192m 224m 256m 288m 320m 352m 384m 416m 448m 480m www.Texim-europe.Com.
Page 61
Chapter 3 – ami bios setup 48 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 512m dvmt total gfx mem 128mb 256mb optimal default, failsafe default max lvds panel type 1024x600, 60hz optimal default, failsafe default color depth 18 bit optimal default, failsafe default lvds backlight level 100%...
Page 62
Chapter 3 – ami bios setup 49 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.5.2 south bridge options summary: audio controller disabled enabled optimal default, failsafe default www.Texim-europe.Com.
Page 63
Chapter 3 – ami bios setup 50 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.6 security change user/administrator password you can set a user password once an administrator password is set. The password will be required during boot up, or when the user enters the setup utility. Please note t...
Page 64
Chapter 3 – ami bios setup 51 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.7 setup submenu: boot options summary: quiet boot disabled enabled default en/disable showing boot logo. Option rom messages force bios default keep current set display mode for option rom launch pxe oprom disabled ...
Page 65
Chapter 3 – ami bios setup 52 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.7.1 bbs priorities www.Texim-europe.Com.
Page 66
Chapter 3 – ami bios setup 53 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 3.8 setup submenu: exit www.Texim-europe.Com.
Page 67
Info tain me nt m ult i-t ou ch p an el pc ac p- 1074 chapter 4 chapter 4 – drivers installation www.Texim-europe.Com.
Page 68
Chapter 4 – driver installation 55 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 4.1 product cd/dvd the acp-1074 comes with a product dvd that contains all the drivers and utilities you need to setup your product. Insert the dvd and follow the steps in the autorun program to install the driv...
Page 69
Chapter 4 – driver installation 56 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 step 4 – install xhci driver (windows 7 only) 1. Open the step 4 - xhci folder and followed by the setup.Exe file 2. Follow the instructions 3. Drivers will be installed automatically step 5 – install intel side...
Page 70
Info tain me nt mu lti- to uc h pa nel pc ac p- 1074 appendix a appendix a - watchdog timer programming www.Texim-europe.Com.
Page 71
Appendix a – watchdog timer programming 58 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 a.1 watchdog timer initial program table 1 : superio relative register table default value note index 0x2e(note1) sio mb pnp mode index register 0x2e or 0x4e data 0x2f(note2) sio mb pnp mode data register...
Page 72
Appendix a – watchdog timer programming 59 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 ************************************************************************************ // superio relative definition (please reference to table 1) #define byte sioindex //this parameter is represented from...
Page 73
Appendix a – watchdog timer programming 60 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 ************************************************************************************ void main(){ // procedure : aaeonwdtconfig // (byte)timer : time of wdt timer.(0x00~0xff) // (boolean)unit : select tim...
Page 74
Appendix a – watchdog timer programming 61 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 ************************************************************************************ // procedure : aaeonwdtenable void aaeonwdtenable (){ wdtenabledisable(enableldn, enablereg, enablebit, 1); } // proced...
Page 75
Appendix a – watchdog timer programming 62 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 ************************************************************************************ void sioentermbpnpmode(){ iowritebyte(sioindex, 0x87); iowritebyte(sioindex, 0x87); } void sioexitmbpnpmode(){ iowriteb...
Page 76
Info tain me nt mu lti- to uc h pa nel pc ac p- 1074 appendix b appendix b - i/o information www.Texim-europe.Com.
Page 77
Appendix b – i/o information 64 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 b.1 i/o address map www.Texim-europe.Com.
Page 78
Appendix b – i/o information 65 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 79
Appendix b – i/o information 66 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 b.2 memory address map www.Texim-europe.Com.
Page 80
Appendix b – i/o information 67 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 b.3 irq mapping chart www.Texim-europe.Com.
Page 81
Appendix b – i/o information 68 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 82
Appendix b – i/o information 69 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 83
Appendix b – i/o information 70 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 84
Appendix b – i/o information 71 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 85
Appendix b – i/o information 72 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 86
Appendix b – i/o information 73 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 87
Appendix b – i/o information 74 info tain me nt mu lti- to uc h pa nel pc ac p- 1074 www.Texim-europe.Com.
Page 88
Info tain me nt m ult i-t ou ch p an el pc ac p- 1074 appendix c appendix c – digital i/o ports www.Texim-europe.Com.
Page 89
Appendix c – digital i/o ports 76 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 c.1 di/o programming acp-1074 utilizes fintek f81866 chipset as its digital i/o controller. Below are the procedures to complete its configuration and the aaeon initial watchdog timer program is also attached bas...
Page 90
Appendix c – digital i/o ports 77 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 c .2 digital i/o register table 1 : superio relative register table default value note index 0x2e(note1) sio mb pnp mode index register 0x2e or 0x4e data 0x2f(note2) sio mb pnp mode data register 0x2f or 0x4f tab...
Page 91
Appendix c – digital i/o ports 78 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 c.3 digital i/o sample program ************************************************************************************ // superio relative definition (please reference to table 1) #define byte sioindex //this parame...
Page 92
Appendix c – digital i/o ports 79 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 ************************************************************************************ // digital output control relative definition (please reference to table 3) #define byte doutput1ldn // this parameter is repre...
Page 93
Appendix c – digital i/o ports 80 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 ************************************************************************************ void main(){ boolean pinstatus ; // procedure : aaeonreadpinstatus // input : // example, read digital i/o pin 3 status // outp...
Page 94
Appendix c – digital i/o ports 81 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 ************************************************************************************ boolean aaeonreadpinstatus(byte ldn, byte register, byte bitnum){ boolean pinstatus ; pinstatus = siobitread(ldn, register, bit...
Page 95
Appendix c – digital i/o ports 82 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 ************************************************************************************ void sioentermbpnpmode(){ iowritebyte(sioindex, 0x87); iowritebyte(sioindex, 0x87); } void sioexitmbpnpmode(){ iowritebyte(sioi...
Page 96
Appendix c – digital i/o ports 83 info tain me nt m ult i-t ou ch p an el pc ac p- 1074 ************************************************************************************ boolean siobitread(byte ldn, byte register, byte bitnum){ byte tmpvalue; sioentermbpnpmode(); sioselectldn(ldn); iowritebyte(si...
Page 97: Contact Details
Contact details 2015 version 2.0 the netherlands germany north nordic region belgium germany south uk & ireland austria elektrostraat 17 nl-7483 pg haaksbergen t: +31 (0)53 573 33 33 f: +31 (0)53 573 33 30 e: nl@texim-europe.Com bahnhofstrasse 92 d-25451 quickborn t: +49 (0)4106 627 07-0 f: +49 (0)4...