- DL manuals
- Aaeon
- Panel pc
- ACP-1076
- User Manual
Aaeon ACP-1076 User Manual
Summary of ACP-1076
Page 1
Last updated: july 25, 2017 acp-1106 10.1” infotainment multi-touch panel pc user’s manual 1 st ed.
Page 2
Preface ii info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 copyright notice this document is copyrighted, 2017. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manua...
Page 3
Preface iii info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 acknowledgement all other products’ name or trademarks are properties of their respective owners. Microsoft windows is a registered trademark of microsoft corp. Intel, pentium, celeron, and xeon are registered trademarks of intel cor...
Page 4
Preface iv info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 packing list before setting up your product, please make sure the following items have been shipped: item quantity acp-1106 1 panel mount kit 1 product dvd 1 if any of these items are missing or damaged, please contact your distributo...
Page 5
Preface v info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 about this document this user’s manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector se...
Page 6
Preface vi info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 safety precautions please read the following safety instructions carefully. It is advised that you keep this manual for future references 1. All cautions and warnings on the device should be noted. 2. All cables and adapters supplied ...
Page 7
Preface vii info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 17. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic componen...
Page 8
Preface viii info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 fcc statement this device complies with part 15 fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including...
Page 9
Preface ix info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 china rohs requirements (cn) 产品中有毒有害物质或元素名称及含量 aaeon panel pc/ workstation 部件名称 有毒有害物质或元素 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 ○ ○ ○ ○ ○ ○ 外部信号 连接器及线材 ○ ○ ○ ○ ○ ○ 外壳 ○ ○ ○ ○ ○ ○ 中央处理器 与内存 ○ ○ ○ ○ ○ ○ ...
Page 10
Preface x info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 china rohs requirement (en) poisonous or hazardous substances or elements in products aaeon panel pc/ workstation component poisonous or hazardous substances or elements lead (pb) mercury (hg) cadmium (cd) hexavalent chromium (cr(vi)) ...
Page 11
Preface xi info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 table of contents chapter 1 - product specifications ............................................................................................ 1 1.1 specifications ......................................................................
Page 12
Preface xii info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.1 system test and initialization .............................................................................. 21 3.2 ami bios setup ....................................................................................................
Page 13
Preface xiii info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 b.3 irq mapping chart .............................................................................................. 56.
Page 14
Info tain me nt m ult i-t ou ch p an el pc ac p- 1106 chapter 1 chapter 1 - product specifications.
Page 15
Chapter 1 – product specifications 2 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 1.1 specifications system processor intel ® pentium ® n4200 / celeron ® n3350 processor system memory 204-pin ddr3l 1333 sodimm x 1, up to 8 gb (pre-installed 4 gb) lcd/crt controller lvds i/o port usb 3.0 x ...
Page 16
Chapter 1 – product specifications 3 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 dimension (w x h x d) 266 x 184 x 48 mm (10.47 x 7.24 x 1.89”) carton dimension (w x h x d) 340 x 194 x 253 mm (13.38 x 7.64 x 9.96”) net weight 1.9 kg (4.18 lb) gross weight 2.9 kg (6.38 lb) environmental op...
Page 17
Chapter 1 – product specifications 4 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 contrast ratio 800:1 viewing angle 160º (h), 160º (v) touchscreen type usb resolution 2048 x 2048 light transmission >86 %.
Page 18
Info tain me nt m ult i-t ou ch p an el pc ac p- 1106 chapter 2 chapter 2 – hardware information.
Page 19
Chapter 2 – hardware information 6 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.1 dimensions 2 6 5 , 9 5 4 8 1 8 3 ,5 6 usb3 . 0 lan lan hdmi dc- in 9 ~ 3 0 v com1 + - u s b 2 .0 po wer co m2 co m3 vesa 7 5 vesa 1 0 0 2 6 5 , 9 5 4 8 1 8 3 ,5 6 usb3 . 0 lan lan hdmi dc- in 9 ~ 3 0 v com1...
Page 20
Chapter 2 – hardware information 7 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.2 jumpers and connectors jumpers (board) component side.
Page 21
Chapter 2 – hardware information 8 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 connectors com option usb option.
Page 22
Chapter 2 – hardware information 9 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.3 list of jumpers please refer to the table below for all of the board’s jumpers that you can configure for your application label function jp1 lvds port1 backlight inverter vcc selection and operating vdd se...
Page 23
Chapter 2 – hardware information 10 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.3.1 lvds port 1 backlight inverter vcc selection (jp1) +12v +5v (default) 2.3.2 lvds port 1 operating vdd selection (jp1) +3.3v (default) +5v 2.3.3 lvds port 1 backlight lightness control mode selection (jp2...
Page 24
Chapter 2 – hardware information 11 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.3.5 com3 pin8 function selection (jp4) +12v ring (default) +5v 2.3.6 auto power button enable/disable selection (jp5) enable/atx (default) disable/at 2.3.7 front panel connector (jp6) pin pin name pin pin na...
Page 25
Chapter 2 – hardware information 12 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.3.8 touch screen 4, 5, 8 wire selection (jp9) 4/8 wires mode 5 wires mode (default) 2.3.9 clear cmos jumper (jp10) normal (default) clear cmos 1 2 3 1 2 3 1 2 3 1 2 3.
Page 26
Chapter 2 – hardware information 13 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.4 list of connectors please refer to the table below for all of the board’s connectors that you can configure for your application label function power power on / off usb 2.0 usb 2.0 com2 / com3 rs232 / rs42...
Page 27
Chapter 2 – hardware information 14 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.4.1 power button: on/off 2.4.2 usb 2.0 port pin pin name pin pin name 1 +5vsb pwr +5v 2 usb4_d- diff 3 usb4_d+ diff 4 gnd gnd 2.4.3 usb 2.0 port x 2 (optional) pin pin name pin pin name 1 +5vsb pwr +5v 2 usb...
Page 28
Chapter 2 – hardware information 15 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2.4.4 com2 / com3 port (rs232/rs422/rs485) rs-232 pin pin name pin pin name 1 dcd in 2 rx in 3 tx out ± 5v 4 dtr out ± 5v 5 gnd gnd 6 dsr in 7 rts out ± 5v 8 cts in 9 ri/ +5v/ +12v in/ pwr +5v/ +12v rs-422 pin...
Page 29
Chapter 2 – hardware information 16 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 8 nc - 9 nc/ +5v/ +12v pwr +5v/ +12v rs-485 pin pin name pin pin name 1 rs485_d- i/o ± 5v 2 rs485_d+ i/o ± 5v 3 nc - 4 nc - 5 gnd gnd - 6 nc - 7 nc - 8 nc - 9 nc/ +5v/ +12v pwr +5v/ +12v 2.4.5 dc-in connector ...
Page 30
Chapter 2 – hardware information 17 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 2 rx in 3 tx out ± 9v 4 dtr out ± 9v 5 gnd gnd 6 dsr in 7 rts out ± 9v 8 cts in 9 ri in 2.4.7 hdmi port pin pin name signal type signal level 1 tmds_dat2+ diff 2 gnd gnd 3 tmds_dat2- diff 4 tmds_dat1+ diff 5 g...
Page 31
Chapter 2 – hardware information 18 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 15 ddc_clk i/o +5v 16 ddc_data i/o +5v 17 gnd gnd 18 +5v i/o +5v 19 hplg_detect in 2.4.8 usb 3.0 port x 2 pin pin name signal type signal level 1 +5vsb pwr +5v 2 usb_d- diff 3 usb_d+ diff 4 gnd gnd 5 usb_ssrx−...
Page 32
Chapter 2 – hardware information 19 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 16 gnd gnd 17 usb_sstx− diff 18 usb_sstx+ diff 2.4.9 lan port x 2 pin pin name signal type signal level 1 mdi0+ diff 2 mdi0- diff 3 mdi1+ diff 4 mdi2+ diff 5 mdi2- diff 6 mdi1- diff 7 mdi3+ diff 8 mdi3- diff 1...
Page 33
Info tain me nt m ult i-t ou ch p an el pc ac p- 1106 chapter 3 chapter 3 - ami bios setup.
Page 34
Chapter 3 – ami bios setup 21 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.1 system test and initialization the system uses certain routines to perform testing and initialization. If an error, fatal or non-fatal, is encountered, a few short beeps or an error message will be outputted. Th...
Page 35
Chapter 3 – ami bios setup 22 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.2 ami bios setup the ami bios rom has a pre-installed setup program that allows users to modify basic system configurations, which is stored in the battery-backed cmos ram and bios nvram so that the information is...
Page 36
Chapter 3 – ami bios setup 23 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.3 setup submenu: main.
Page 37
Chapter 3 – ami bios setup 24 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4 setup submenu: advanced.
Page 38
Chapter 3 – ami bios setup 25 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.1 advanced: trusted computing options summary: security device support enabled optimal default, failsafe default disabled enable or disable sata bios support for security device. O.S. Will not show security devi...
Page 39
Chapter 3 – ami bios setup 26 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.2 advanced: cpu configuration options summary: c-states disabled optimal default, failsafe default enabled enabled/disable c states eist disabled optimal default, failsafe default enabled enabled/disable intel s...
Page 40
Chapter 3 – ami bios setup 27 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 vt-d disabled optimal default, failsafe default enabled enabled/disable cpu vt-d.
Page 41
Chapter 3 – ami bios setup 28 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.3 advanced: sata configuration options summary: chipset sata enabled optimal default, failsafe default disabled enables or disables the chipset sata controller. The chipset sata controller supports the 2 black i...
Page 42
Chapter 3 – ami bios setup 29 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.4 advanced: pci express configuration.
Page 43
Chapter 3 – ami bios setup 30 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 options summary: pcie slot (cn33) enable optimal default, failsafe default disable control pcie slot (cn33) hot plug disable optimal default, failsafe default enable pci express hot plug enable/disable pcie speed au...
Page 44
Chapter 3 – ami bios setup 31 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.5 advanced: hardware monitor.
Page 45
Chapter 3 – ami bios setup 32 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.6 advanced: sio configuration.
Page 46
Chapter 3 – ami bios setup 33 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.6.1 sio configuration: serial port 1 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable this logical device. Possible: use automatic settings opti...
Page 47
Chapter 3 – ami bios setup 34 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.6.2 sio configuration: serial port 2 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable this logical device. Possible: use automatic settings opti...
Page 48
Chapter 3 – ami bios setup 35 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.6.3 sio configuration: serial port 3 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable this logical device. Possible: use automatic settings opti...
Page 49
Chapter 3 – ami bios setup 36 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.4.7 advanced: power management options summary: power mode atx type optimal default, failsafe default at type select power supply mode. Restore ac power loss last state optimal default, failsafe default always on ...
Page 50
Chapter 3 – ami bios setup 37 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.5 setup submenu: chipset.
Page 51
Chapter 3 – ami bios setup 38 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.5.1 north bridge.
Page 52
Chapter 3 – ami bios setup 39 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.5.1.1 lvds panel configuration options summary: backlight level 10% optimal default, failsafe default 20% 30% 40% 50% 60% 70% 80% 90% 100% select backlight control level.
Page 53
Chapter 3 – ami bios setup 40 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.6 setup submenu: security change user/administrator password you can set a user password once an administrator password is set. The password will be required during boot up, or when the user enters the setup utili...
Page 54
Chapter 3 – ami bios setup 41 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.7 setup submenu: boot options summary: quiet boot disabled enabled optimal default, failsafe default enables or disables quiet boot option. Monitor mwait disabled enabled auto optimal default, failsafe default ena...
Page 55
Chapter 3 – ami bios setup 42 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.8 boot: bbs priorities.
Page 56
Chapter 3 – ami bios setup 43 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 3.9 setup submenu: save & exit.
Page 57
Info tain me nt m ult i-t ou ch p an el pc ac p- 1106 chapter 4 chapter 4 – drivers installation.
Page 58
Chapter 4 – driver installation 45 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 4.1 product cd/dvd the acp-1106 comes with a product dvd that contains all the drivers and utilities you need to setup your product. Insert the dvd and follow the steps in the autorun program to install the dri...
Page 59
Chapter 4 – driver installation 46 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 step 4 – install txe driver 1. Open the step 4 - txe folder and followed by the setuptxe.Exe file 2. Follow the instructions 3. Drivers will be installed automatically step 5 – install touch drivers 1. Open the...
Page 60
Info tain me nt m ult i-t ou ch p an el pc ac p- 1106 appendix a appendix a - watchdog timer programming.
Page 61
Appendix a – watchdog timer programming 48 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 a.1 watchdog timer initial program table 1 : superio relative register table default value note index 0x2e(note1) sio mb pnp mode index register 0x2e or 0x4e data 0x2f(note2) sio mb pnp mode data regist...
Page 62
Appendix a – watchdog timer programming 49 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 ************************************************************************************ // superio relative definition (please reference to table 1) #define byte sioindex //this parameter is represented fr...
Page 63
Appendix a – watchdog timer programming 50 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 ************************************************************************************ void main(){ // procedure : aaeonwdtconfig // (byte)timer : time of wdt timer.(0x00~0xff) // (boolean)unit : select t...
Page 64
Appendix a – watchdog timer programming 51 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 ************************************************************************************ // procedure : aaeonwdtenable void aaeonwdtenable (){ wdtenabledisable(enableldn, enablereg, enablebit, 1); } // proc...
Page 65
Appendix a – watchdog timer programming 52 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 ************************************************************************************ void sioentermbpnpmode(){ iowritebyte(sioindex, 0x87); iowritebyte(sioindex, 0x87); } void sioexitmbpnpmode(){ iowrit...
Page 66
Info tain me nt m ult i-t ou ch p an el pc ac p- 1106 appendix b appendix b - i/o information.
Page 67
Appendix b – i/o information 54 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 b.1 i/o address map.
Page 68
Appendix b – i/o information 55 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 b.2 memory address map.
Page 69
Appendix b – i/o information 56 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6 b.3 irq mapping chart.
Page 70
Appendix b – i/o information 57 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 71
Appendix b – i/o information 58 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 72
Appendix b – i/o information 59 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 73
Appendix b – i/o information 60 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 74
Appendix b – i/o information 61 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 75
Appendix b – i/o information 62 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 76
Appendix b – i/o information 63 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.
Page 77
Appendix b – i/o information 64 info tain me nt m ult i-t ou ch p an el pc ac p- 110 6.