- DL manuals
- Aaeon
- Desktop
- AEC-6613
- User Manual
Aaeon AEC-6613 User Manual
Summary of AEC-6613
Page 1
Last updated: december 31, 2015 aec-6613 fanless embedded box pc user‟s manual 4 th ed.
Page 2
Preface ii fan les s e mb ed ded bo x pc ae c- 6613 copyright notice this document is copyrighted, 2015. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be repro...
Page 3
Preface iii fan les s e mb ed ded bo x pc ae c- 6613 acknowledgement all other products‟ name or trademarks are properties of their respective owners. Microsoft windows is a registered trademark of microsoft corp. Intel, pentium, celeron, and xeon are registered trademarks of intel corporation core,...
Page 4
Preface iv fan les s e mb ed ded bo x pc ae c- 6613 packing list before setting up your product, please make sure the following items have been shipped: item quantity boxer-6613 1 phoenix power connector 1 screw package 1 heat spreader 1 wall mount brackets 2 product cd with user‟s manual (in pdf) a...
Page 5
Preface v fan les s e mb ed ded bo x pc ae c- 6613 about this document this user‟s manual contains all the essential information, such as detailed descriptions and explanations on the product‟s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definit...
Page 6
Preface vi fan les s e mb ed ded bo x pc ae c- 6613 safety precautions please read the following safety instructions carefully. It is advised that you keep this manual for future references 1. All cautions and warnings on the device should be noted. 2. All cables and adapters supplied by aaeon are c...
Page 7
Preface vii fan les s e mb ed ded bo x pc ae c- 6613 17. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any stat...
Page 8
Preface viii fan les s e mb ed ded bo x pc ae c- 6613 fcc statement this device complies with part 15 fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference ...
Page 9
Preface ix fan les s e mb ed ded bo x pc ae c- 6613 china rohs requirements (cn) 产品中有毒有害物质或元素名称及含量 aaeon embedded box pc/ industrial system 部件名称 有毒有害物质或元素 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 ○ ○ ○ ○ ○ ○ 外部信号 连接器及线材 ○ ○ ○ ○ ○ ○ 外壳 ○ ○ ○ ○ ○ ○ 中央处理器 与内存 ○ ○ ○ ○ ○ ○ 硬...
Page 10
Preface x fan les s e mb ed ded bo x pc ae c- 6613 china rohs requirement (en) poisonous or hazardous substances or elements in products aaeon embedded box pc/ industrial system component poisonous or hazardous substances or elements lead (pb) mercury (hg) cadmium (cd) hexavalent chromium (cr(vi)) p...
Page 11
Preface xi fan les s e mb ed ded bo x pc ae c- 6613 table of contents chapter 1 - product specifications ........................................................................................ 1 1.1 specifications ........................................................................................
Page 12
Preface xii fan les s e mb ed ded bo x pc ae c- 6613 3.4.5.1 super io configuration: serial port 2 configuration . 40 3.4.6 advanced: smart fan function .................................................. 42 3.4.7 advanced: h/w monitor ............................................................. 43 ...
Page 13
Fan les s e mb ed ded bo x pc ae c- 6613 chapter 1 chapter 1 - product specifications.
Page 14
Chapter 1 – product specifications 2 fan les s e mb ed ded bo x pc ae c- 6613 1.1 specifications system cpu intel ® atom tm d2550 1.86 ghz memory ddr3 800/1066 sodimm x 1, up to 4 gb) vga vga x 1 (optional 2 nd vga) ethernet gigabit ethernet, rj-45 connector x 2 hard disk storage 2.5” sata hdd bay x...
Page 15
Chapter 1 – product specifications 3 fan les s e mb ed ded bo x pc ae c- 6613 net weight 2.16 kg (4.75 lb) environmental operating temperature no airflow: 0 ~ 50°c (32 ~ 122°f) - hdd 0 ~ 55°c (32 ~ 131°f) - cfast™ card ambient with airflow: 0 ~ 55°c (32 ~ 131°f) - hdd 0 ~ 60°c (32 ~ 140°f) - cfast™ ...
Page 16
Fan les s e mb ed ded bo x pc ae c- 6613 chapter 2 chapter 2 – hardware information.
Page 17
Chapter 2 – hardware information 5 fan les s e mb ed ded bo x pc ae c- 6613 2.1 dimensions model a1 cfast -- + 12v dc.
Page 18
Chapter 2 – hardware information 6 fan les s e mb ed ded bo x pc ae c- 6613 model a1m cfast.
Page 19
Chapter 2 – hardware information 7 fan les s e mb ed ded bo x pc ae c- 6613 model a2 cfast -- + 12v dc.
Page 20
Chapter 2 – hardware information 8 fan les s e mb ed ded bo x pc ae c- 6613 model a2m cfast.
Page 21
Chapter 2 – hardware information 9 fan les s e mb ed ded bo x pc ae c- 6613 model a3/a4 aec-6613 -a3 aec-6613 -a4 cfast -- + 12v dc.
Page 22
Chapter 2 – hardware information 10 fan les s e mb ed ded bo x pc ae c- 6613 model a3m/a4m aec-6613 -a3m aec-6613 -a4m cfast.
Page 23
Chapter 2 – hardware information 11 fan les s e mb ed ded bo x pc ae c- 6613 2.2 jumpers and connectors component side.
Page 24
Chapter 2 – hardware information 12 fan les s e mb ed ded bo x pc ae c- 6613 solder side.
Page 25
Chapter 2 – hardware information 13 fan les s e mb ed ded bo x pc ae c- 6613 2.3 list of jumpers please refer to the table below for all of the system‟s connectors that you can configure for your application label function jp1 auto power button selection jp2 clear cmos jp3 com2 ri/+5/+12v selection ...
Page 26
Chapter 2 – hardware information 14 fan les s e mb ed ded bo x pc ae c- 6613 2.4 list of connectors please refer to the table below for all of the system‟s connectors that you can configure for your application label function cn1 front panel cn2 external +5vsb input cn3 cpu fan cn4 +5vsb output w/ s...
Page 27
Chapter 2 – hardware information 15 fan les s e mb ed ded bo x pc ae c- 6613 cn24 2nd lvds inverter cn25 stereo-l channel cn26 1st lvds inverter cn27 1st lvds (single channel 18/24bit) cn28 2nd rj-45 ethernet cn29 1st rj-45 ethernet cn30 usb port #1 and #2 cn31 audio line in/out and mic cn32 crt/dvi...
Page 28
Chapter 2 – hardware information 16 fan les s e mb ed ded bo x pc ae c- 6613 2.4.1 com2 port #4 (cn16) pin signal pin signal 1 dcdd 2 rxd 3 txd 4 dtrd 5 ground 6 dsrd 7 rtsd 8 ctsd 9 rid 2.4.2 com2 port #3 (cn18) pin signal pin signal 1 dcdc 2 rxc 3 txc 4 dtrc 5 ground 6 dsrc 7 rtsc 8 ctsc 9 ric 2.4...
Page 29
Chapter 2 – hardware information 17 fan les s e mb ed ded bo x pc ae c- 6613 5 ground 6 dsrb 7 rtsb 8 ctsb 9 rib/+5v/(+12v) rs-422 pin signal pin signal 1 txd- 2 rxd+ 3 txd+ 4 rxd- 5 ground 6 n/c 7 n/c 8 n/c 9 n/c / +5v / (+12v) rs-485 pin signal pin signal 1 txd- 2 n/c 3 txd+ 4 n/c 5 ground 6 n/c 7...
Page 30
Chapter 2 – hardware information 18 fan les s e mb ed ded bo x pc ae c- 6613 2.5 cfast™ card installation step 1: install the cfast™ card. Step 2: lower the arm to secure..
Page 31
Chapter 2 – hardware information 19 fan les s e mb ed ded bo x pc ae c- 6613 2.6 hard disk drive installation (model a1m/a2m) step 1: open the base of aec-6613 by removing the screws. Step 2: get the hard disk drive ready..
Page 32
Chapter 2 – hardware information 20 fan les s e mb ed ded bo x pc ae c- 6613 step 3: place the hdd on the bracket and secure with screws step 4: connect the sata and power cables to the hdd..
Page 33
Chapter 2 – hardware information 21 fan les s e mb ed ded bo x pc ae c- 6613 step 5: place the assembled hdd back into the device and secure with screws..
Page 34
Chapter 2 – hardware information 22 fan les s e mb ed ded bo x pc ae c- 6613 2.7 sdram installation step 1: remove the stands and base to access the interior.
Page 35
Chapter 2 – hardware information 23 fan les s e mb ed ded bo x pc ae c- 6613 step 2: remove the highlighted screws to remove the front panel.
Page 36
Chapter 2 – hardware information 24 fan les s e mb ed ded bo x pc ae c- 6613 step 3: insert the sdram to the memory slot, push down to secure.
Page 37
Chapter 2 – hardware information 25 fan les s e mb ed ded bo x pc ae c- 6613 step 4: place a heat-spreading sheet onto the sdram..
Page 38
Chapter 2 – hardware information 26 fan les s e mb ed ded bo x pc ae c- 6613 2.8 din rail installation step 1: attach the din rail kit onto the chassis as shown below. Step 2: slide a din rail into the din rail kit to check installation.
Page 39
Chapter 2 – hardware information 27 fan les s e mb ed ded bo x pc ae c- 6613 2.9 wallmount kit installation to attach the wallmount kit on to the aec-6613, tightens the screws as shown in the diagram below. We suggest using this screw..
Page 40
Fan les s e mb ed ded bo x pc ae c- 6613 chapter 3 chapter 3 - ami bios setup.
Page 41
Chapter 3 – ami bios setup 29 fan les s e mb ed ded bo x pc ae c- 6613 3.1 system test and initialization the system uses certain routines to perform testing and initialization. If an error, fatal or non-fatal, is encountered, a few short beeps or an error message will be outputted. The board can us...
Page 42
Chapter 3 – ami bios setup 30 fan les s e mb ed ded bo x pc ae c- 6613 3.2 ami bios setup the ami bios rom has a pre-installed setup program that allows users to modify basic system configurations, which is stored in the battery-backed cmos ram and bios nvram so that the information is retained when...
Page 43
Chapter 3 – ami bios setup 31 fan les s e mb ed ded bo x pc ae c- 6613 3.3 setup submenu: main options summary: (default setting) system date day mm:dd:yyyy change the month, year and century. The „day‟ is changed automatically. System time hh : mm : ss change the clock of the system..
Page 44
Chapter 3 – ami bios setup 32 fan les s e mb ed ded bo x pc ae c- 6613 3.4 setup submenu: advanced options summary: (default setting) acpi settings system acpi parameters cpu configuration cpu configuration parameters sata configuration sata device options settings usb configuration usb configuratio...
Page 45
Chapter 3 – ami bios setup 33 fan les s e mb ed ded bo x pc ae c- 6613 smart fan function smart fan function settings h/w monitor monitor hardware status.
Page 46
Chapter 3 – ami bios setup 34 fan les s e mb ed ded bo x pc ae c- 6613 3.4.1 advanced: acpi settings options summary: (default setting) acpi sleep state suspend disabled s3 (suspend to ram) select the acpi state used for system suspend.
Page 47
Chapter 3 – ami bios setup 35 fan les s e mb ed ded bo x pc ae c- 6613 3.4.2 advanced: cpu computing options summary: (default setting) hyper-threading disabled enabled cpu hyper-threading technology support or not.
Page 48
Chapter 3 – ami bios setup 36 fan les s e mb ed ded bo x pc ae c- 6613 3.4.3 advanced: sata configuration options summary: (default setting) sata controller(s) enabled disabled sata controller enable/disable sata mode ide ahci configure sata controller operating as ide/ahci mode. Sata portx enabled ...
Page 49
Chapter 3 – ami bios setup 37 fan les s e mb ed ded bo x pc ae c- 6613 disabled enable / disable sata portx hot plug function 3.4.4 advanced: usb configuration options summary: (default setting) legacy usb support enabled disabled auto enables bios support for legacy usb support. When enabled, usb c...
Page 50
Chapter 3 – ami bios setup 38 fan les s e mb ed ded bo x pc ae c- 6613 (emulation type) floppy forced fdd hard disk cd-rom if auto. Usb devices less than 530mb will be emulated as floppy and remaining as floppy and remaining as hard drive. Forced fdd option can be used to force a hdd formatted drive...
Page 51
Chapter 3 – ami bios setup 39 fan les s e mb ed ded bo x pc ae c- 6613 3.4.5 advanced: super io configuration options summary: (default setting) serial port x configuration set parameters of serial port x parallel port configuration set parallel port configuration restore ac power loss power off pow...
Page 52
Chapter 3 – ami bios setup 40 fan les s e mb ed ded bo x pc ae c- 6613 3.4.5.1 super io configuration: serial port 2 configuration options summary: (default setting) serial port disabled enabled en/disable specified serial port. Change settings auto io=2f8h; irq=3; io=3f8h; irq=3,4,5,7,10,11,12; io=...
Page 53
Chapter 3 – ami bios setup 41 fan les s e mb ed ded bo x pc ae c- 6613 com2 type option rs232 rs422 rs485 configure com2 operated as rs232, rs422 or rs485..
Page 54
Chapter 3 – ami bios setup 42 fan les s e mb ed ded bo x pc ae c- 6613 3.4.6 advanced: smart fan function options summary: (default setting) smart fan 1 mode full on mode automatic mode manual mode smart fan 1 mode select.
Page 55
Chapter 3 – ami bios setup 43 fan les s e mb ed ded bo x pc ae c- 6613 3.4.7 advanced: h/w monitor.
Page 56
Chapter 3 – ami bios setup 44 fan les s e mb ed ded bo x pc ae c- 6613 3.5 setup submenu: chipset options summary: (default setting) host bridge host bridge parameters south bridge south bridge parameters.
Page 57
Chapter 3 – ami bios setup 45 fan les s e mb ed ded bo x pc ae c- 6613 3.5.1 chipset: host bridge options summary: (default setting) intel igd configuration enter to set graphic configuration memory information show current memory information.
Page 58
Chapter 3 – ami bios setup 46 fan les s e mb ed ded bo x pc ae c- 6613 3.5.1.1 chipset: igd configuration options summary: (default setting) auto disable igd disabled enabled support auto disable igd igfx – boot type vbios default select the video device which will be activated during post fixed gra...
Page 59
Chapter 3 – ami bios setup 47 fan les s e mb ed ded bo x pc ae c- 6613 3.5.2 chipset: south bridge options summary: (default setting) power mode select at/atx power mode tpt devices configure onboard tpt devices pci express port x disabled enabled enable/disable pci express port 0 - 3.
Page 60
Chapter 3 – ami bios setup 48 fan les s e mb ed ded bo x pc ae c- 6613 3.5.2.1 south bridge: tpt devices options summary: (default setting) azalia controller disabled hd audio azalia controller enable/disable r8111e #x controller disabled enabld r8111e enable/disable.
Page 61
Chapter 3 – ami bios setup 49 fan les s e mb ed ded bo x pc ae c- 6613 3.6 setup submenu: boot options summary: (default setting) quiet boot disabled enabled enables or disables quiet boot option launch 8111e pxe oprom disabled enabled en/disable pxe boot for onboard 8111e lan boot option #x xxxx dr...
Page 62
Chapter 3 – ami bios setup 50 fan les s e mb ed ded bo x pc ae c- 6613 3.6.1 boot: bbs priorities options summary: (default setting) boot option #x disabled device name sets the system boot order.
Page 63
Chapter 3 – ami bios setup 51 fan les s e mb ed ded bo x pc ae c- 6613 3.7 security options summary: (default setting) administrator password/ user password not set change user/administrator password you can set a user password once an administrator password is set. The password will be required dur...
Page 64
Chapter 3 – ami bios setup 52 fan les s e mb ed ded bo x pc ae c- 6613 confirmation. Press enter again after you have retyped it correctly. Removing the password highlight this item and type in the current password. At the next dialog box press enter to disable password protection..
Page 65
Chapter 3 – ami bios setup 53 fan les s e mb ed ded bo x pc ae c- 6613 3.7.1 security: hdd security options summary: (default setting) set user password/ set master password not set before booting to os, hdd will be set to a frozen state. On s3 resume hdd will be unlocked using the hdd password we e...
Page 66
Chapter 3 – ami bios setup 54 fan les s e mb ed ded bo x pc ae c- 6613 removing the password highlight this item and type in the current password. At the next dialog box press enter to disable password protection..
Page 67
Chapter 3 – ami bios setup 55 fan les s e mb ed ded bo x pc ae c- 6613 3.8 setup submenu: save & exit options summary: (default setting) save changes and reset reset the system after saving the changes discard changes and reset reset system setup without saving any changes restore defaults restore/l...
Page 68
Fan les s e mb ed ded bo x pc ae c- 6613 chapter 4 chapter 4 – drivers installation.
Page 69
Chapter 4 – driver installation 57 fan les s e mb ed ded bo x pc ae c- 6613 4.1 product cd/dvd the aec-6613 comes with a product dvd that contains all the drivers and utilities you need to setup your product. Insert the dvd and follow the steps in the autorun program to install the drivers. In case ...
Page 70
Chapter 4 – driver installation 58 fan les s e mb ed ded bo x pc ae c- 6613 1. Open the step4 - audio folder and select your os 2. Open the setup.Exe file in the folder 3. Follow the instructions 4. Drivers will be installed automatically step 5 – install raid & ahci driver please refer to appendix ...
Page 71
Fan les s e mb ed ded bo x pc ae c- 6613 appendix a appendix a - watchdog timer programming.
Page 72
Appendix a – watchdog timer programming 60 fan les s e mb ed ded bo x pc ae c- 6613 a.1 watchdog timer programming aec-6613 utilizes the ite 8783 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the aaeon initial watchdog timer program is also atta...
Page 73
Appendix a – watchdog timer programming 61 fan les s e mb ed ded bo x pc ae c- 6613 the key-check logic, it is necessary to perform four write operations to the special address port (2eh). Two different enter keys are provided to select configuration ports (2eh/2fh) of the next step. (2) modify the ...
Page 74
Appendix a – watchdog timer programming 62 fan les s e mb ed ded bo x pc ae c- 6613 watch dog timer 1, 2, 3 control register (index=71h,81h,91h default=00h) watch dog timer 1, 2, 3 configuration register (index=72h, 82h, 92h default=001s0000b) watch dog timer 1,2,3 time-out value (lsb) register (ind...
Page 75
Appendix a – watchdog timer programming 63 fan les s e mb ed ded bo x pc ae c- 6613 watch dog timer 1,2,3 time-out value (msb) register (index=74h,84h,94h default=00h).
Page 76
Appendix a – watchdog timer programming 64 fan les s e mb ed ded bo x pc ae c- 6613 a.2 ite8783 watchdog timer initial program .Model small .Code main: call enter_configuration_mode call check_chip mov cl, 7 call set_logic_device ;time setting mov cl, 10 ; 10 sec dec al watch_dog_setting: ;timer set...
Page 77
Appendix a – watchdog timer programming 65 fan les s e mb ed ded bo x pc ae c- 6613 initial_ok: call exit_configuration_mode mov ah,4ch int 21h enter_configuration_mode proc near mov si,word ptr cs:[offset cfg_port] mov dx,02eh mov cx,04h init_1: mov al,byte ptr cs:[si] out dx,al inc si loop init_1 ...
Page 78
Appendix a – watchdog timer programming 66 fan les s e mb ed ded bo x pc ae c- 6613 call read_configuration_data cmp al,87h jne not_initial mov al,21h call read_configuration_data cmp al,81h jne not_initial need_initial: stc ret not_initial: clc ret check_chip endp read_configuration_data proc near ...
Page 79
Appendix a – watchdog timer programming 67 fan les s e mb ed ded bo x pc ae c- 6613 mov dx,word ptr cs:[cfg_port+06h] out dx,al ret write_configuration_data endp superio_set_reg proc near push ax mov dx,word ptr cs:[cfg_port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret superio_set_reg endp.S...
Page 80
Appendix a – watchdog timer programming 68 fan les s e mb ed ded bo x pc ae c- 6613 dw 02eh,02fh end main note: interrupt level mapping 0fh-dh: not valid 0ch: irq12 . . 03h: irq3 02h: not valid 01h: irq1 00h: no interrupt selected.
Page 81
Fan les s e mb ed ded bo x pc ae c- 6613 appendix b appendix b - i/o information.
Page 82
Appendix b – i/o information 70 fan les s e mb ed ded bo x pc ae c- 6613 b.1 i/o address map.
Page 83
Appendix b – i/o information 71 fan les s e mb ed ded bo x pc ae c- 6613.
Page 84
Appendix b – i/o information 72 fan les s e mb ed ded bo x pc ae c- 6613 b.2 1 st memory address map.
Page 85
Appendix b – i/o information 73 fan les s e mb ed ded bo x pc ae c- 6613 b.3 irq mapping chart.
Page 86
Appendix b – i/o information 74 fan les s e mb ed ded bo x pc ae c- 6613.
Page 87
Appendix b – i/o information 75 fan les s e mb ed ded bo x pc ae c- 6613 b.4 dma channel assignments.
Page 88
Fan les s e mb ed ded bo x pc ae c- 6613 appendix c appendix c – ahci settings.
Page 89
Appendix c – ahci settings 77 fan les s e mb ed ded bo x pc ae c- 6613 c.1 setting ahci os installation to setup ahci mode step 1: copy the files below from “driver cd -> step5-ahci\win7_32\f6 install floppy create for 32 and 64 bit windows” to disk step 2: setup os.
Page 90
Appendix c – ahci settings 78 fan les s e mb ed ded bo x pc ae c- 6613 step 3: press “f6” step 4: choose “s”.
Page 91
Appendix c – ahci settings 79 fan les s e mb ed ded bo x pc ae c- 6613 step 5: choose “intel® nm10 express chipset” step 6: it will show the model number you select and then press “enter step 7: setup is loading files.