1. DL manuals
  2. Aaeon
  3. Motherboard
  4. EMB-9658T Mini-ITX
  5. User manual

Aaeon EMB-9658T Mini-ITX User manual - Quick

Manual is about: Intel CoreTM 2 Duo/ Celeron M Processor, Mini-ITX Intel 82573L, 82566MM Ethernet TPM 1.2 VIA VT1708B Audio & Mini PCI

Summary of EMB-9658T Mini-ITX

  • Page 1

    Mini -itx e m b - 9 6 5 8 t emb-9658t intel ® core tm 2 duo/ celeron ® m processor, mini-itx intel ® 82573l, 82566mm ethernet tpm 1.2 via vt1708b audio & mini pci emb-9658t manual rev.A 1 st ed. July, 2009.

  • Page 2

    M i n i - i t x e m b - 9 6 5 8 t i copyright notice this document is copyrighted, 2009. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, t...

  • Page 3

    M i n i - i t x e m b - 9 6 5 8 t ii acknowledgments all other products’ name or trademarks are properties of their respective owners. Award is a trademark of award software international, inc. Compactflash ™ is a trademark of the compact flash association. Intel ® , core tm 2 duo/ core tm duo/ core...

  • Page 4

    M i n i - i t x e m b - 9 6 5 8 t iii packing list before you begin installing your card, please make sure that the following materials have been shipped: 1 1709070500 sata cable 1 1702151200 onboard sata power cable 1 m206908t00 metal i/o bracket 1 quick installation guide 1 utility cd 1 emb-9658t ...

  • Page 5

    M i n i - i t x e m b - 9 6 5 8 t iv contents chapter 1 general information 1.1 introduction................................................................ 1-2 1.2 features .................................................................... 1-3 1.3 specifications .....................................

  • Page 6

    M i n i - i t x e m b - 9 6 5 8 t v 2.18 usb connector/10/100/1000 base-tx ethernet connector(1) (cn5)....................................................... 2-15 2.19 usb connector/10/100/1000 base-tx ethernet connector(2) (cn6)....................................................... 2-15 2.20 tv_ou...

  • Page 7

    M i n i - i t x e m b - 9 6 5 8 t vi 2.41 cpu fan connector (cn29) ............................... 2-24 2.42 front panel connector (cn30) ............................. 2-25 2.43 compactflash connector (cn31)......................... 2-25 2.44 atx power_12v connector(cn32) ...................... 2-26...

  • Page 8: General

    M i n i - i t x e m b - 9 6 5 8 t chapter 1 general information 1- 1 general chapter 1 information.

  • Page 9

    M i n i - i t x e m b - 9 6 5 8 t chapter 1 general information 1-2 1.1 introduction the emb-9658t adopts the latest intel ® core™ 2 duo/ celeron ® m (socket-p based) processors and intel ® gme965+ich8m chipset for better power-management capabilities and enhanced performance. The system memory of e...

  • Page 10

    M i n i - i t x e m b - 9 6 5 8 t chapter 1 general information 1-3 1.2 features intel® core™ 2 duo/ celeron® m (socket-p based) processors intel® gme965 + ich8m (-e optional for raid) ddrii 533/667 memory, max. 4gb gigabit ethernet x 2, with one 82566mm support iamt 2.5 18/24 bit dual-channel lvds,...

  • Page 11

    M i n i - i t x e m b - 9 6 5 8 t chapter 1 general information 1-4 1.3 specifications system form factor mini-itx processor intel® core™ 2 duo/ celeron® m (socket-p based) processors system memory 200-pin ddrii sodimm x 2, max. 4gb (ddrii 533/667) chipset intel® gme965 + ich8m(-e optional for raid)...

  • Page 12

    M i n i - i t x e m b - 9 6 5 8 t chapter 1 general information 1-5 battery lithium battery power requirement dc 12v / at/ atx board size 6.7" (l) x 6.7" (w) (170mm x 170mm) gross weight 1.1lb (0.5kg) operating temp. 32°f ~ 140°f (0°c ~ 60°c) storage temp. -40°f ~ 176°f (-40°c ~ 80°c) operating humi...

  • Page 13

    M i n i - i t x e m b - 9 6 5 8 t chapter 1 general information 1-6 1080i/1080p dvi dvi-i x 1 i/o storage eide x 1 (shared signals with compactflash™) sataii x 2 serial port rs-232 x 4, rs-232/422/485 x 1, ttl x 1 parallel port spp/ epp/ ecp mode usb usb2.0 x 8 ps/2 port keyboard x 1, mouse x 1 digi...

  • Page 14: Quick

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 1 quick installation chapter 2 guide notice: the quick installation guide is derived from chapter 2 of user manual. For other chapters and further installation instructions, please refer to the user manual cd-rom that came with...

  • Page 15

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 2 2.1 safety precautions always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic ...

  • Page 16

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 3 2.2 location of connectors and jumpers locating connectors and jumpers (component side).

  • Page 17

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 4 locating connectors and jumpers (solder side).

  • Page 18

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 5 2.3 mechanical drawing component side.

  • Page 19

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 6 solder side.

  • Page 20: Jumpers

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 7 2.4 list of jumpers the board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: jumpers label function jp1 lcd inverte...

  • Page 21: Connectors

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 8 2.5 list of connectors the board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors: connectors label function cn1...

  • Page 22

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 9 cn19 lpt port connector cn20 at power connector cn21 pci express slot cn22 usb connector cn23 usb connector cn24 digital i/o connector cn25 com4 rs-232 serial port connector cn26 com3 rs-232 serial port connector cn27 com6 rs...

  • Page 23

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 10 2.6 setting jumpers you configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected b...

  • Page 24

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 11 2.7 lcd inverter voltage selection (jp1) jp1 function 1-2 +5v (default) 2-3 +12v 2.8 com2 ring/+5v/+12v selection (jp2) jp2 function 1-2 +12v 3-4 +5v 5-6 ring (default) 2.9 lcd voltage selection (jp3) jp3 function 1-2 +5v 2-...

  • Page 25

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 12 2.12 atx power simulate at power (jp6) jp6 function nc atx or at standard (default) 1-2 atx power simulate at power 2.13 connector pin assignment 2.14 dvi+crt connector (cn1) pin signal pin signal 1 dvi_tx2- 2 dvi_tx2+ 3 gnd...

  • Page 26

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 13 27 n.C 28 n.C c1 red c2 green c3 blue c4 hsync c5 gnd c6 gnd 29 ddcclk 30 n.C 31 +5v 32 hsync 33 green 34 gnd 35 n.C 36 gnd 37 gnd 38 vsync 39 blue 40 gnd 41 ddcdat 42 red 43 gnd 2.15 audio speaker output (cn2) pin signal 1 ...

  • Page 27

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 14 2.16 com1 rs-232&com2 rs-232/422/485 (cn3) pin signal pin signal 1 dcd1 2 rxd1 3 txd1 4 dtr1 5 gnd 6 dsr1 7 rts1 8 cts1 9 ri1 10 dcd2(422txd-/485data-) 11 rxd2(422rxd+) 12 txd2(422txd+/485data+) 13 dtr2(422rxd-) 14 gnd 15 ds...

  • Page 28

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 15 9 lfe-out 10 gnd 11 cne-out 12 gnd 13 spdif-out 14 spdif-in 2.18 usb connector/10/100/1000 base-tx ethernet connector(1) (cn5) pin signal pin signal 1 lan2 tct 2 lan2 mdi0+ 3 lan2_mdi0- 4 lan2_mdi1+ 5 lan2_mdi1- 6 lan2_mdi2+...

  • Page 29

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 16 13 lan1_s100led 14 lan1_s1000led 19 +5v 20 usbd0- 21 usbd0+ 22 gnd 23 +5v 24 usbd1- 25 usbd1+ 26 gnd 2.20 tv_out connector (cn7) pin signal pin signal 1 y 2 cvbs 3 gnd 4 gnd 5 c 6 n.C. 7 gnd 8 n.C. 2.21 lcd inverter connecto...

  • Page 30

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 17 2.23 internal keyboard connector (cn10) pin signal 1 kb clk 2 kb_data 3 n.C. 4 gnd 5 +5v 2.24 internal mouse connector (cn11) pin signal 1 ms clk 2 ms_data 3 gnd 4 +5v 2.25 lvds-lcd connector (cn12) pin signal pin signal 1 e...

  • Page 31

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 18 23 lvds2_tx2- 24 lvds2_tx2+ 25 nc 26 nc 27 ppvcc 28 gnd 29 lvds2_txclk- 30 lvds2_txclk+ 2.26 sdvo connector (cn13) pin signal pin signal 1 sdvo_spc 2 sdvo_rst# 3 sdvo_spd 4 smbclk 5 nc 6 smbdata 7 gnd 8 gnd 9 sdvo_red# 10 sd...

  • Page 32

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 19 2.27 system fan connector(cn14) pin signal 1 gnd 2 vcc of fan 3 speed sense 4 speed control 2.28 rtc battery connector(cn16) pin signal 1 battery power input 2 gnd 2.29 gps connector(cn17) pin signal 1 nc 2 nc 3 gnd 4 gps_le...

  • Page 33

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 20 2 nc 12 -12v 3 gnd 13 gnd 4 +5v 14 ps_on 5 gnd 15 gnd 6 +5v 16 gnd 7 gnd 17 gnd 8 power ok 18 -5v 9 +5vsb 19 +5v 10 +12v 20 +5v 2.31 lpt port connector (cn19) pin signal pin signal 1 strobe 2 afd 3 ptd0 4 error 5 ptd1 6 init...

  • Page 34

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 21 2.32 at power connector(cn20) pin signal 1 nc 2 +5v 3 +12v 4 -12v 5 gnd 6 gnd 7 gnd 8 gnd 9 -5v 10 +5v 11 +5v 12 +5v 2.33 pci express slot (cn21) pin signal pin signal a1 nc b1 +12v a2 +12v b2 +12v a3 +12v b3 +12v a4 gnd b4 ...

  • Page 35

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 22 a13 pcie1_clkp b13 gnd a14 pcie1_clkn b14 pcie1_txp a15 gnd b15 pcie1_txn a16 pcie1_rxp b16 gnd a17 pcie1_rxn b17 nc a18 gnd b18 gnd a19 nc b19 pcie2_txp a20 gnd b20 pcie2_txn a21 pcie2_rxp b21 gnd a22 pcie2_rxn b22 gnd a23 ...

  • Page 36

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 23 2.35 usb connector(cn23) pin signal pin signal 1 +5v 2 gnd 3 usbd4- 4 gnd 5 usbd4+ 6 usbd5+ 7 gnd 8 usbd5- 9 gnd 10 +5v 2.36 digital i/o connector (cn24) pin signal pin signal 1 digital-in/ out 2 digital-in/out 3 digital-in/...

  • Page 37

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 24 7 rts 8 cts 9 ri 10 n.C. 2.39 com6 rs-232 serial port connector (cn27) pin signal pin signal 1 dcd 2 rxd 3 txd 4 dtr 5 gnd 6 dsr 7 rts 8 cts 9 ri 10 n.C. 2.40 irda connector (cn28) pin signal 1 +5v 2 n.C. 3 irrx 4 gnd 5 irtx...

  • Page 38

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 25 2.42 front panel connector (cn30) pin signal pin signal 1 power on button (-) 2 power on button (+) 3 ide led (-) 4 ide led (+) 5 external buzzer (-) 6 external buzzer (+) 7 power led (-) 8 power led (+) 9 reset switch (-) 1...

  • Page 39

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 26 20 a0 45 active# 21 d0 46 pdiag# 22 d1 47 d8 23 d2 48 d9o 24 n/c 49 d10 25 gnd 50 gnd 2.44 atx power_12v connector(cn32) pin signal 1 gnd 2 gnd 3 +12v 4 +12v 2.45 sata power connector (cn33) pin signal 1 +12v 2 gnd 3 gnd 4 +...

  • Page 40

    M i n i - i t x e m b - 9 6 5 8 t chapter 2 quick installation guide 2 - 27 aaeon main board/ daughter board/ backplane 有毒有害物质或元素 部件名称 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 × ○ ○ ○ ○ ○ 外部信号 连接器及线材 × ○ ○ ○ ○ ○ o：表示该有毒有害物质在该部件所有均质材料中的含量均在 sj/t 11363-2006 标准规定的限量要求以下。 x...

  • Page 41: Award

    M i n i - i t x e m b - 9 6 5 8 t chapter 3 award bios setup 3-1 chapter award 3 bios setup.

  • Page 42

    M i n i - i t x e m b - 9 6 5 8 t chapter 3 award bios setup 3-2 3.1 system test and initialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kind...

  • Page 43: Entering Setup

    M i n i - i t x e m b - 9 6 5 8 t chapter 3 award bios setup 3-3 3.2 award bios setup awards bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram so that it retains the setup information when t...

  • Page 44: Advanced Chipset Features

    M i n i - i t x e m b - 9 6 5 8 t chapter 3 award bios setup 3-4 advanced chipset features use this menu to change the values in the chipset registers and optimize your system performance. Integrated peripherals use this menu to specify your settings for integrated peripherals. (primary slave, secon...

  • Page 45: Load Optimized Defaults

    M i n i - i t x e m b - 9 6 5 8 t chapter 3 award bios setup 3-5 load optimized defaults use this menu to load the bios default values that are factory settings for optimal performance system operations. While award has designated the custom bios to maximize performance, the factory has the right to...

  • Page 46: Driver

    M i n i - i t x e m b - 9 6 5 8 t chapter 4 driver installation 4-1 chapter driver 4 installation.

  • Page 47

    M i n i - i t x e m b - 9 6 5 8 t chapter 4 driver installation 4-2 the emb-9658t comes with an autorun cd-rom that contains all drivers and utilities that can help you to install the driver automatically. Insert the driver cd, the driver cd-title will auto start and show the installation guide. If ...

  • Page 48: 4.1 Installation:

    M i n i - i t x e m b - 9 6 5 8 t chapter 4 driver installation 4-3 4.1 installation: insert the emb-9658t cd-rom into the cd-rom drive. And install the drivers from step 1 to step 5 in order. Step 1 – install chip driver 1. Click on the step 1-chip folder and then double click on the infinst_autol....

  • Page 49

    M i n i - i t x e m b - 9 6 5 8 t chapter 4 driver installation 4-4 step 4 – install audio driver 1. Click on the step 4- audio driver folder and then double click on the setup.Exe 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically step 5 – ...

  • Page 50: Programming The

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-1 programming the watchdog timer appendix a.

  • Page 51

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-2 a.1 programming emb-9658t utilizes ite 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the aaeon intial watchdog timer program is also attached based on which you...

  • Page 52

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-3 there are three steps to complete the configuration setup: (1) enter the mb pnp mode; (2) modify the data of configuration registers; (3) exit the mb pnp mode. Undesired result may occur if the mb pnp mode is not exited ...

  • Page 53

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-4 watchdog timer configuration registers configure control (index=02h) this register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the so...

  • Page 54

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-5 watchdog timer configuration register (index=72h, default=00h) watchdog timer time-out value register (index=73h, default=00h).

  • Page 55

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-6 a.2 it8712 watchdog timer initial program .Model small .Code main: call enter_configuration_mode call check_chip mov cl, 7 call set_logic_device ;time setting mov cl, 10 ; 10 sec dec al watch_dog_setting: ;timer setting ...

  • Page 56

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-7 ; game port enable mov cl, 9 call set_logic_device initial_ok: call exit_configuration_mode mov ah,4ch int 21h enter_configuration_mode proc near mov si,word ptr cs:[offset cfg_port] mov dx,02eh mov cx,04h init_1: mov al...

  • Page 57

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-8 ret exit_configuration_mode endp check_chip proc near mov al,20h call read_configuration_data cmp al,87h jne not_initial mov al,21h call read_configuration_data cmp al,12h jne not_initial need_initial: stc ret not_initia...

  • Page 58

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-9 mov dx,word ptr cs:[cfg_port+06h] in al,dx ret read_configuration_data endp write_configuration_data proc near mov dx,word ptr cs:[cfg_port+04h] out dx,al xchg al,ah mov dx,word ptr cs:[cfg_port+06h] out dx,al ret write_...

  • Page 59

    M i n i - i t x e m b - 9 6 5 8 t appendix a programming the watchdog timer a-10 push ax push cx xchg al,cl mov cl,07h call superio_set_reg pop cx pop ax ret set_logic_device endp ;select 02eh->index port, 02fh->data port cfg_port db 087h,001h,055h,055h dw 02eh,02fh end main note: interrupt level ma...

  • Page 60: I/o Information

    M i n i - i t x e m b - 9 6 5 8 t appendix b i/o information b-1 i/o information appendix b.

  • Page 61

    M i n i - i t x e m b - 9 6 5 8 t appendix b i/o information b-2 b.1 i/o address map.

  • Page 62

    M i n i - i t x e m b - 9 6 5 8 t appendix b i/o information b-3.

  • Page 63

    M i n i - i t x e m b - 9 6 5 8 t appendix b i/o information b-4 b.2 memory address map.

  • Page 64

    M i n i - i t x e m b - 9 6 5 8 t appendix b i/o information b-5 b.3 irq mapping chart.

  • Page 65

    M i n i - i t x e m b - 9 6 5 8 t appendix b i/o information b-6 b.4 dma channel assignments.

  • Page 66: Mating Connecotor

    M i n i - i t x e m b - 9 6 5 8 t appendix c mating connector c - 1 mating connecotor appendix c.

  • Page 67

    M i n i - i t x e m b - 9 6 5 8 t appendix c mating connector c - 2 c.1 list of mating connectors and cables the table notes mating connectors and available cables. Mating connector connector label function vendor model no available cable cable p/n cn2 speaker output catch 2.5mm pitch 4 pins (catch ...

  • Page 68

    M i n i - i t x e m b - 9 6 5 8 t appendix c mating connector c - 3 or compatible) cn12 lvds lcd e-call 1.25mm pitch 30 pins(e-call.011 0-01-553-300 or compatible) na na cn13 sdvo catch 1.0mm pitch 40 pins(catch.120 4-710-40sm or compatible) cn14 fan catch 2.54mm pitch 3 pins (catch 1190-700-042 or ...

  • Page 69

    M i n i - i t x e m b - 9 6 5 8 t appendix c mating connector c - 4 0-10msp or compatible) cn23 usb port catch 2.00mm pitch 10 pins (catch.1147-00 0-10msp or compatible) usb cable 1709100201 cn24 digital i/o catch 2.00mm pitch 10 pins(catch.114 7-000-10msp or compatible) na na cn25 rs-232 serial por...

  • Page 70

    M i n i - i t x e m b - 9 6 5 8 t appendix c mating connector c - 5 or compatible) cn30 front panel jih vei 2.54mm pitch 10 pins (jih vei.21n22564- 10s10b-01g-6/ 3 or compatible) na na cn32 atx power socket catch 3.5mm pitch 4pins (catch 1121-700-04s or compatible) na na cn33 sata power connector ho...