1. DL manuals
  2. Aaeon
  3. Motherboard
  4. EMB-H61B
  5. Manual

Aaeon EMB-H61B Manual

Manual is about: Industrial Motherboard

Summary of EMB-H61B

  • Page 1

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b emb-h61b manual 1 st ed. December 2012.

  • Page 2

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b i copyright notice this document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may ...

  • Page 3

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b ii acknowledgments all other products ’ name or trademarks are properties of their respective owners.  ami is a trademark of american megatrends inc.  compactflash ™ is a trademark of the compact flash association.  intel ® is a trademark ...

  • Page 4

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b iii packing list before you begin installing your card, please make sure that the following materials have been shipped: 1 industrial motherboard 1 sata cable 1 sata power cable 1 metal i/o bracket 1 dvd-rom for manual (in pdf format) and dri...

  • Page 5

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b iv contents chapter 1 general information 1.1 features .................................................................... 1-2 1.2 specifications ............................................................ 1-3 chapter 2 quick installation g...

  • Page 6

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b v 2.16 digital i/o connector (dio) ..................................... 2-12 2.17 front panel connector (f_panel) ......................... 2-13 2.18 inverter connector (inv) ......................................... 2-13 2.19 lvds panel sig...

  • Page 7: General

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 1 general information 1- 1 general information chapter 1.

  • Page 8: 1.1 Features

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 1 general information 1-2 1.1 features intel ® socket 1155 for 3 rd /2 nd generation core™ i7/ i5/ i3/ pentium® / celeron® processors (supports intel® 22/32 nm cpu up to 65w) 2 x 204-pin dual-channel ddr3 1333/1066mhz so-dimm up to 16...

  • Page 9: 1.2 Specifications

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 1 general information 1-3 1.2 specifications system processor intel ® 2 nd /3 rd generation core™ i7/i5/i3 processor, up to 65w system memory 204-pin dual-channel ddr3 1333/1066 sodimm x 2, max. 16 gb chipset intel ® h61 (b3) i/o chip...

  • Page 10: Display

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 1 general information 1-4 gross weight 1.1 lb (0.5 kg) operating temperature 32°f ~ 131°f (0°c ~ 55°c) storage temperature -40°f ~ 185°f (-40°c ~ 85°c) operating humidity 0% ~ 90% relative humidity, non-condensing emi ce/fcc class a d...

  • Page 11: Quick

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 1 quick installation guide chapter 2.

  • Page 12: 2.1 Safety Precautions

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 2 2.1 safety precautions always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can dama...

  • Page 13: Component Side

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 3 2.2 location of connectors and jumpers component side.

  • Page 14: Solder Side

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 4 solder side.

  • Page 15: 2.3 Mechanical Drawing

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 5 2.3 mechanical drawing component side.

  • Page 16: Solder Side

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 6 solder side.

  • Page 17: 2.4 List Of Jumpers

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 7 2.4 list of jumpers the board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: label function...

  • Page 18

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 8 com5 com5 connector com6 com6 connector debug debug connector dimm_a1 dimm1 slot dimm_b1 dimm2 slot dio digital i/o connector f_panel front panel connector hdmi1 hdmi connector hdmi2 hdmi connector inv...

  • Page 19: 2.6 Setting Jumpers

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 9 2.6 setting jumpers you configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal ...

  • Page 20: 2.7 Clear Cmos (Clrtc)

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 10 2.7 clear cmos (clrtc) clrtc function 1-2 rtc batt. 2-3 clear cmos 2.8 lvds panel voltage selection (j1) j1 function 1-2 +5v 2-3 +3.3v (default) 2.9 inverter voltage selection (j2) j2 function 1-2 +12...

  • Page 21: (Kbms_Usb56)

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 11 2.12 com1 ring/+5v/+12v selection (j5) j5 function 1-2 +12v 3-4 +5v 5-6 ring (default) 2.13 internal com serial port connector (com2 ~ com6) pin signal pin signal 1 dcd 2 rxd 3 txd 4 dtr 5 gnd 6 dsr 7...

  • Page 22

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 12 15 gnd 16 gnd 17 gnd 18 gnd 2.15 1000base-t ethernet connector with dock usb 2.0 connector (lan1_ usb12 / lan2_ usb34) pin signal pin signal 1 +5v 2 usb2_dn2 3 usb2_dp2 4 gnd 5 +5v 6 usb2_dn1 7 usb2_d...

  • Page 23

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 13 3 dio_i#3 (dio_p#3) 4 dio_i#4 (dio_p#4) 5 dio_o#1 (dio_p#5) 6 dio_o#2 (dio_p#6) 7 dio_o#3 (dio_p#7) 8 dio_o#4 (dio_p#8) 9 +5v 10 gnd 2.17 front panel connector (f_panel) pin signal pin signal 1 hdled+...

  • Page 24

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 14 25 lvds1_d3- 26 lvds1_d3+ 23 lvds1_d2- 24 lvds1_d2+ 21 lvds1_d1- 22 lvds1_d1+ 19 lvds1_d0- 20 lvds1_d0+ 17 edid_data 18 edid_clk 15 lvds0_d3- 16 lvds0_d3+ 13 lvds0_d2- 14 lvds0_d2+ 11 lvds0_d1- 12 lvd...

  • Page 25

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 2 quick installation guide 2 - 15 2.20 sata power connector (pwr1) pin signal 1 +5v 2 gnd 3 gnd 4 +12v 2.21 fan connector (s_fan1 / s_fan2) pin signal 1 pwm 2 sense 3 vcc 4 gnd 2.22 internal usb 2.0 connector (usb910) pin signal pin s...

  • Page 26: Ami

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-1 ami bios setup chapter 3.

  • Page 27

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-2 3.1 system test and initialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the scre...

  • Page 28: 3.2  Ami Bios Setup

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-3 3.2 ami bios setup ami bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram so that it retains the setup i...

  • Page 29: Setup Menu

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-4 setup menu setup submenu: main setup submenu: advanced.

  • Page 30: Acpi Settings

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-5 acpi settings options summary : suspend mode s1 (cpu stop clock) s3 (suspend to ram) optimal default, failsafe default select the acpi state used for system suspend.

  • Page 31: Trusted Computing

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-6 trusted computing options summary: security device support disabled optimal default, failsafe default enabled en/disable tpm support. Tpm state disabled optimal default, failsafe default enabled en/disable tpm sta...

  • Page 32: S5 Rtc Wake Settings

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-7 enable take ownership disable take ownership tpm clear select one-time tpm operation. Item value returns to ‘none’ after next post. S5 rtc wake settings.

  • Page 33: Cpu Configuration

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-8 cpu configuration.

  • Page 34

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-9 options summary : hyper-threading disabled enabled optimal default, failsafe default en/disable cpu hyper-threading function intel virtualization technology disabled optimal default, failsafe default enabled en/di...

  • Page 35: Digital Io Configuration

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-10 digital io configuration options summary : dio_p# 1-4 input optimal default, failsafe default output set gpio as input or output dio_p# 5-8 input output optimal default, failsafe default set gpio as input or outp...

  • Page 36: Sata Controller(S)

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-11 dio_p# 1-8 direction low high optimal default, failsafe default set gpio output as hi or low. Sata controller(s) options summary : sata controller(s) disabled enabled default sata controller(s) sata configuration...

  • Page 37

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-12 ahci ide: configure sata controllers as legacy ide ahci: configure sata controllers to operate in ahci mode sata controller speed gen1 default gen2 select serial ata controller speed port 0, 1, 4, 5 disabled enab...

  • Page 38: Usb Configuration

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-13 usb configuration options summary: legacy usb support enabled optimal default, failsafe default disabled auto enables bios support for legacy usb support. When enabled, usb can be functional in legacy environment...

  • Page 39

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-14 forced fdd hard disk cdrom if auto. Usb devices less than 530mb will be emulated as floppy and remaining as floppy and remaining as hard drive. Forced fdd option can be used to force a hdd formatted drive to boot...

  • Page 40: Serial Port Configuration

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-15 serial port configuration.

  • Page 41

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-16 options summary : f81866 erp function disabled default enabled enable or disable erp function. Serial port disabled enabled default allows bios to en/disable correspond serial port. Device mode rs232 default rs42...

  • Page 42

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-17 io=2e8h; irq=10,11 allows bios to select serial port resource. Change settings (serial port 3) auto default io=3e8h; irq=10,11; io=2e8h; irq=10,11; io=2d0h; irq=10,11; io=2d8h; irq=10,11 allows bios to select ser...

  • Page 43: F81866 H/w Monitor

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-18 io=2d8h; irq=10,11 allows bios to select serial port resource. Device mode disable ir1 function default enable ir1 function, active pulse 1.6us enable ir1 function, active pulse 3/16 bit time select device mode. ...

  • Page 44

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-19 smart fan mode configuration.

  • Page 45

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-20 options summary : sys/cpu smart fan control auto by rpm auto by duty-cycle default manual by rpm manual by duty-cycle select cpu smart fan mode auto by rpm: automatically controlling the fan to maintain target fa...

  • Page 46: Setup Submenu: Chipset

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-21 setup submenu: chipset pch-io configuration.

  • Page 47

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-22 options summary : power mode atx type optimal default, failsafe default at type select power mode. Restore on ac power loss power off default power on last state select the action system to take when restoring fr...

  • Page 48

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-23 system agent (sa) configuration options summary : pcie x 4 gen speed gen1 optimal default, failsafe default gen2 select pci express gen speed..

  • Page 49: Graphics Configuration

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-24 graphics configuration options summary : primary display auto default igfx peg select which of igfx/peg graphics device should be primary display. Internal graphics auto default disable enable keep igd enabled ba...

  • Page 50

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-25 select the gtt size. Aperture size 128mb 256mb default 512mb select the aperture size. Dvmt pre-allocated 32m 64m default 96m 128m 160m 192m 224m 256m 288m 320m 352m 384m 416m 448m 480m 512m 1024m select dvmt 5.0...

  • Page 51

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-26 dvmt total gfx mem 128m 256m max default select dvmt total graphics memory primary igfx boot display auto default crt hdmi-1 hdmi-2 dvi select the video device which will be activated during post. For dual-displa...

  • Page 52

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-27 1280x768 24bit 1366x768 24bit 1440x900 48bit 1920x1080 48bit 1280x1024 18bit 1280x1024 24bit select lcd panel used by internal graphics device by selecting the appropriate setup item. Ch7511b baclight control mod...

  • Page 53: Setup Submenu: Boot

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-28 setup submenu: boot options summary : bootup numlock state on default off select the keyboard numlock state. Quiet boot disabled default enabled en/disable showing boot logo. Launch rtl8111f pxe oprom disabled de...

  • Page 54

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-29 gatea20 active upon request default always upon request – ga20 can be disabled using bios services. Always – do not allow disabling ga20; this option is useful when any rt code is executed above 1mb. Option rom m...

  • Page 55: Setup Submenu: Security

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-30 setup submenu: security change user/supervisor password you can install a supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide acce...

  • Page 56: Setup Submenu: Exit

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 3 ami bios setup 3-31 box press enter to disable password protection. Setup submenu: exit.

  • Page 57: Driver

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 4 driver installation 4-1 driver installation chapter 4.

  • Page 58

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 4 driver installation 4-2 follow the sequence below to install the drivers: step 1 – install chipset driver step 2 – install vga driver step 3 – install lan driver step 4 – install audio driver step 5 – install ahci driver step 6 – in...

  • Page 59: 4.1 Installation:

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter4 drivers installation 4-3 4.1 installation: insert dvd-rom into the dvd-rom drive. And install the drivers from step 1 to step 8 in order. Step 1 – install chipset driver 1. Click on the step1 - chipset folder and then double click on...

  • Page 60: Step 5

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 4 driver installation 4-4 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically step 5 – install ahci driver 1. Click on the step 5 - ahci folder 2. For xp, please copy the fi...

  • Page 61

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter4 drivers installation 4-5.

  • Page 62

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter 4 driver installation 4-6.

  • Page 63

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b chapter4 drivers installation 4-7.

  • Page 64: Programming The

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix a programming the watchdog timer a-1 programming the watchdog timer appendix a.

  • Page 65

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix a programming the watchdog timer a-2 a.1 watchdog timer initial program table 1 : superio relative register table default value note index 0x2e (note1) sio mb pnp mode index register 0x2e or 0x4e data 0x2f (note2) sio mb pnp mode dat...

  • Page 66

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix a programming the watchdog timer a-3 ************************************************************************************ // superio relative definition (please reference to table 1) #define byte sioindex //this parameter is represen...

  • Page 67: Main

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix a programming the watchdog timer a-4 ************************************************************************************ void main (){ // procedure : aaeonwdtconfig // (byte)timer : time of wdt timer.(0x00~0xff) // (boolean)unit : s...

  • Page 68

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix a programming the watchdog timer a-5 ************************************************************************************ // procedure : aaeonwdtenable void aaeonwdtenable () { wdtenabledisable( enableldn, enablereg, enablebit, 1 ); ...

  • Page 69

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix a programming the watchdog timer a-6 ************************************************************************************ void sioentermbpnpmode() { iowritebyte(sioindex, 0x87); iowritebyte(sioindex, 0x87); } void sioexitmbpnpmode() ...

  • Page 70: Mating  Connector

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix b mating connector b - 1 mating connector appendix b.

  • Page 71

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 a appendix b mating connector b - 2 b support up to 65w .1 list of mating connectors and cables the table notes mating connectors and available cables. Connector label function mating connector vendor model no atx12v atx 4p power connector pinr...

  • Page 72

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix b mating connector b - 3 hdmi1 hdmi con 19p,0.5mm,a type,r/a sinbon 1165-92104-24d hdmi2 hdmi con 19p,0.5mm,a type,r/a sinbon 1165-92104-24d inv inverter connector pinrex 721-81-05tw00 kbms_us b56 ps/2 keyboard/mouse connector with d...

  • Page 73: Electrical  Specifications

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c - 1 electrical specifications for i/o ports appendix c.

  • Page 74: C.1 Dio Programming

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-2 c.1 dio programming emb-h61b utilizes fintek 81866 chipset as its digital i/o controller. Below are the procedures to complete its configuration and the aaeon initial watchdog timer progr...

  • Page 75: C.2 Digital I/o Register

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-3 c.2 digital i/o register table 1 : superio relative register table default value note index 0x2e (note1) sio mb pnp mode index register 0x2e or 0x4e data 0x2f (note2) sio mb pnp mode data...

  • Page 76

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-4 c.3 digital i/o sample program ************************************************************************************ // superio relative definition (please reference to table 1) #define by...

  • Page 77

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-5 ************************************************************************************ // digital output control relative definition (please reference to table 3) #define byte doutput1ldn /...

  • Page 78: Main

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-6 ************************************************************************************ void main (){ boolean pinstatus ; // procedure : aaeonreadpinstatus // input : // example, read digita...

  • Page 79

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-7 ************************************************************************************ boolean aaeonreadpinstatus(byte ldn, byte register, byte bitnum) { boolean pinstatus ; pinstatus = sio...

  • Page 80

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-8 ************************************************************************************ void sioentermbpnpmode() { iowritebyte(sioindex, 0x87); iowritebyte(sioindex, 0x87); } void sioexitmbp...

  • Page 81

    I n d u s t r i a l m o t h e r b o a r d e m b - h 6 1 b appendix c electrical specifications for i/o ports c-9 ************************************************************************************ boolean siobitread(byte ldn, byte register, byte bitnum) { byte tmpvalue; sioentermbpnpmode(); siosele...

  • Page 82: Texim Europe B.V.

    Partner in electronic components & supply chain solutions texim europe b.V. Elektrostraat 17 nl-7483 pg haaksbergen tel: +31 (0)53 573 33 33 info@texim-europe.Com www.Texim-europe.Com belgium united kingdom st. Mary’s house, church lane carlton le moorland lincoln ln5 9hs tel: +44 (0)1522 789 555 fa...