- DL manuals
- Aaeon
- PCI Card
- EPIC-KBS7
- User Manual
Aaeon EPIC-KBS7 User Manual
Summary of EPIC-KBS7
Page 1
Last updated: july 20, 2017 epic-kbs7 epic board user’s manual 1 st ed.
Page 2
Preface ii epic bo ar d epic -k bs 7 copyright notice this document is copyrighted, 2017. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, ...
Page 3
Preface iii epic bo ar d epic -k bs 7 acknowledgement all other products’ name or trademarks are properties of their respective owners. Microsoft windows is a registered trademark of microsoft corp. Intel, pentium, celeron, and xeon are registered trademarks of intel corporation core, atom are trade...
Page 4
Preface iv epic bo ar d epic -k bs 7 packing list before setting up your product, please make sure the following items have been shipped: item quantity epic-kbs7 1 1702150155 sata power cable 1 1709070500 sata cable 1 9657666600 jumper cap 1 product dvd with drivers 1 if any of these items are missi...
Page 5
Preface v epic bo ar d epic -k bs 7 about this document this user’s manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and drive...
Page 6
Preface vi epic bo ar d epic -k bs 7 safety precautions please read the following safety instructions carefully. It is advised that you keep this manual for future references 1. All cautions and warnings on the device should be noted. 2. Make sure the power source matches the power rating of the dev...
Page 7
Preface vii epic bo ar d epic -k bs 7 17. If any of the following situations arises, please the contact our service personnel: i. Damaged power cord or plug ii. Liquid intrusion to the device iii. Exposure to moisture iv. Device is not working as expected or in a manner as described in this manual v...
Page 8
Preface viii epic bo ar d epic -k bs 7 fcc statement this device complies with part 15 fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause ...
Page 9
Preface ix epic bo ar d epic -k bs 7 china rohs requirements (cn) 产品中有毒有害物质或元素名称及含量 aaeon main board/ daughter board/ backplane 部件名称 有毒有害物质或元素 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 ○ ○ ○ ○ ○ ○ 外部信号 连接器及线材 ○ ○ ○ ○ ○ ○ o：表示该有毒有害物质在该部件所有均质材料中的含量均在 sj/t 11363-2006 标准规定的限...
Page 10
Preface x epic bo ar d epic -k bs 7 china rohs requirement (en) poisonous or hazardous substances or elements in products aaeon main board/ daughter board/ backplane component poisonous or hazardous substances or elements lead (pb) mercury (hg) cadmium (cd) hexavalent chromium (cr(vi)) polybrominate...
Page 11
Preface xi epic bo ar d epic -k bs 7 table of contents chapter 1 - product specifications.......................................................................................... 1 1.1 specifications ......................................................................................................
Page 12
Preface xii epic bo ar d epic -k bs 7 2.4.15 rs232 pin header (cn26) ........................................................... 20 2.4.16 dio pin header (cn24) .............................................................. 21 2.5 cpu installation .......................................................
Page 13
Preface xiii epic bo ar d epic -k bs 7 appendix a - watchdog timer programming ..................................................................... 5 a.1 watchdog timer initial program .......................................................................... 6 appendix b - i/o information ...........
Page 14
Epic bo ar d epic -k bs 7 chapter 1 chapter 1 - product specifications.
Page 15
Chapter 1 – product specifications 2 epic bo ar d epic -k bs 7 1.1 specifications system form factor epic board processor 7th gen. Intel ® core™ i7/i5/i3/celeron ® , xeon ® system memory up to 16 gb ddr4 (non-ecc) 2133 mhz chipset intel ® h110 (6w) i/o chipset fintek f81866d ethernet intel 10/100/10...
Page 16
Chapter 1 – product specifications 3 epic bo ar d epic -k bs 7 storage temperature -40 ~ 80°c (-40 ~ 176°f) operation humidity 0 ~ 90%, relative humidity, non-condensing display chipset processor-integrated display combination crt/hdmi (option: lvds) lcd interface lvds 18/24bit, 2ch i/o sata 2 x sat...
Page 17
Epic bo ar d epic -k bs 7 chapter 2 chapter 2 – hardware information.
Page 18
Chapter 2 – hardware information 2 epic bo ar d epic -k bs 7 2.1 dimensions component side.
Page 19
Chapter 2 – hardware information 3 epic bo ar d epic -k bs 7.
Page 20
Chapter 2 – hardware information 4 epic bo ar d epic -k bs 7 solder side.
Page 21
Chapter 2 – hardware information 5 epic bo ar d epic -k bs 7 2.2 jumpers and connectors component side.
Page 22
Chapter 2 – hardware information 6 epic bo ar d epic -k bs 7 solder side.
Page 23
Chapter 2 – hardware information 7 epic bo ar d epic -k bs 7 2.3 list of jumpers please refer to the table below for all of the board’s jumpers that you can configure for your application label function jp4 lvds power select conn jp5 backlight power select conn jp6 clean c-mos pin header jp7 at/atx ...
Page 24
Chapter 2 – hardware information 8 epic bo ar d epic -k bs 7 2.3.1 lvds power select / lvds bklt power select (jp4) lvds power select +5v +3.3v (default) lvds bklt power select +12v +5v (default) 2.3.2 lvds bklt control (jp5) +12v +5v (default) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4...
Page 25
Chapter 2 – hardware information 9 epic bo ar d epic -k bs 7 2.3.3 rtc reset header (jp6) normal (default) clear cmos 2.3.4 atx/at select (jp7) disable enable (default) 2.3.5 front panel header (jp9) pin pin name pin pin name 1 gnd 2 ext_pwrbtn# 3 fp_hdled- 4 fp_hdled+ 5 fp_spkr- 6 +v5s 7 gnd 8 pwrl...
Page 26
Chapter 2 – hardware information 10 epic bo ar d epic -k bs 7 2.4 list of connectors please refer to the table below for all of the board’s connectors that you can configure for your application label function cn1 backlight conn cn2 2 pin dc in connector cn3 lvds conn cn4 3 pin sb power in connector...
Page 27
Chapter 2 – hardware information 11 epic bo ar d epic -k bs 7 cn22 usb 3.0 connector bz1 pc buzzer cn23 hdmi conn cn25 vga conn u18 bois socket cpu1 cpu socket dimm1 ram socket1 led1 stand by power led indicate led2 +v5s led indicate led3 hdd led indicate.
Page 28
Chapter 2 – hardware information 12 epic bo ar d epic -k bs 7 2.4.1 backlight conn (cn1) pin pin name 1 blk_pwr 2 blk_control 3 gnd 4 gnd 5 bkl_enable 2.4.2 2 pin dc in connector (cn2) pin pin name 1 +vin 9~24v or 12v 2 gnd 2.4.3 lvds conn (cn3) blk_pwr 2 3 4 5 1 bkl_control gnd gnd bkl_enable +vin ...
Page 29
Chapter 2 – hardware information 13 epic bo ar d epic -k bs 7 pin pin name 1 bkl_enable 2 bkl_control 3 lcd_pwr 4 gnd 5 lvds_a_clk- 6 lvds_a_clk+ 7 lcd_pwr 8 gnd 9 lvds_da0- 10 lvds_da0+ 11 lvds_da1- 12 lvds_da1+ 13 lvds_da2- 14 lvds_da2+ 15 lvds_da3- 16 lvds_da3+ 17 ddc_data 18 ddc_clk 19 lvds_db0-...
Page 30
Chapter 2 – hardware information 14 epic bo ar d epic -k bs 7 20 lvds_db0+ 21 lvds_db1- 22 lvds_db1+ 23 lvds_db2- 24 lvds_db2+ 25 lvds_db3- 26 lvds_db3+ 27 lcd_pwr 28 gnd 29 lvds_b_clk- 30 lvds_b_clk+ 2.4.4 3 pin sb power in connector (cn4) pin pin name 1 pson# 2 gnd 3 +v5a_sb_in +5vsb gnd ps_on# 1 ...
Page 31
Chapter 2 – hardware information 15 epic bo ar d epic -k bs 7 2.4.5 audio pin header (cn5) pin pin name 1 mic_l 2 mic_r 3 gnd 4 lin_l 5 lin_r 6 gnd 7 lout_l 8 gnd 9 lout_r 10 +vdd_aud 2.4.6 rtc battery conn (cn6) pin pin name mic_l 1 10 mic_r line_l_in line_r_in left_out right_out +5v_audio gnd_audi...
Page 32
Chapter 2 – hardware information 16 epic bo ar d epic -k bs 7 1 rtcvcc 2 gnd 2.4.7 sata power connector (cn7) pin pin name 1 +5v 2 gnd 2.4.8 usb pin header (cn8 / cn9) pin pin name 1 vcc 2 usbd- 3 usbd+ 4 gnd 5 gnd +5v gnd +5vsb usb2_d- usb2_d+ gnd gnd.
Page 33
Chapter 2 – hardware information 17 epic bo ar d epic -k bs 7 2.4.9 sata port 1/sata port 2 (cn10/cn13) pin pin name pin pin name 1 gnd 1 gnd 2 sata_txp0 2 sata_txp1 3 sata_txn0 3 sata_txn1 4 gnd 4 gnd 5 sata_rxn0 5 sata_rxn1 6 sata_rxp0 6 sata_rxp1 7 gnd 7 gnd 2.4.10 external fan pin header (cn14) ...
Page 34
Chapter 2 – hardware information 18 epic bo ar d epic -k bs 7 2.4.11 lpc connector for debug (cn15) pin pin name 1 lpc_ad0 2 lpc_ad1 3 lpc_ad2 4 lpc_ad3 5 p3v3 6 frame# 7 rst# 8 gnd 9 clk 10 ldrq0 11 ldrq1 12 int_serirq 2.4.12 rs232/422/485 pin header (cn16) lad0 1 12 lad1 lad2 lad3 lframe# lreset# ...
Page 35
Chapter 2 – hardware information 19 epic bo ar d epic -k bs 7 pin pin name 1 dcd2 2 dsr2 3 rx2 4 rts2 5 tx2 6 cts2 7 dtr2 8 ri1 9 gnd 2.4.13 rs232 pin header (cn17) pin pin name 1 dcd1.
Page 36
Chapter 2 – hardware information 20 epic bo ar d epic -k bs 7 2 dsr1 3 rx1 4 rts1 5 tx1 6 cts1 7 dtr1 8 ri1 9 gnd 2.4.14 rs232 pin header (cn18) pin pin name 1 dcd3 2 dsr3 3 rx3 4 rts3 5 tx3 6 cts3 7 dtr3 8 ri3 9 gnd 2.4.15 rs232 pin header (cn26).
Page 37
Chapter 2 – hardware information 21 epic bo ar d epic -k bs 7 pin pin name 1 dcd4 2 dsr4 3 rx4 4 rts4 5 tx4 6 cts4 7 dtr4 8 ri4 9 gnd 2.4.16 dio pin header (cn24) pin pin name pin pin name 1 pd0 2 pd1 3 pd2 4 pd3 5 pd4 6 pd5 dio1 dio3 dio5 dio7 gnd dio0 1 2 9 10 dio2 dio4 dio6 +5v.
Page 38
Chapter 2 – hardware information 22 epic bo ar d epic -k bs 7 7 pd6 8 pd7 9 +v5s 10 gnd 2.5 cpu installation turn off the system, unplug the power cord and make sure the system is off. Have intel kabylake or intel skylake-s fclga1151 processor (max. Tdp 35w) ready. Step 1: remove the plastic cover a...
Page 39
Chapter 2 – hardware information 23 epic bo ar d epic -k bs 7 step3: assemble the cover, and make sure that the corners align. Step 4: push the cover down so that it fits..
Page 40
Chapter 2 – hardware information 24 epic bo ar d epic -k bs 7 step 7: install the sponge..
Page 41: Chapter 3
Epic bo ar d epic -kb s7 chapter 3 chapter 3 - bios setup.
Page 42
Chapter 3 – bios setup 2 epic bo ar d epic -k bs 7 3.1 system test and initialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: f...
Page 43
Chapter 3 – bios setup 3 epic bo ar d epic -k bs 7 3.2 ami bios setup ami bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram and bios nvram so that it retains the setup information when the p...
Page 44
Chapter 3 – bios setup 4 epic bo ar d epic -k bs 7 3.3 setup submenu: main.
Page 45
Chapter 3 – bios setup 5 epic bo ar d epic -k bs 7 3.4 setup submenu: advanced.
Page 46
Chapter 3 – bios setup 6 epic bo ar d epic -k bs 7 3.4.1 cpu configuration options summary: intel (vmx) virtualization technology disabled enabled optimal default, failsafe default when enabled, a vmm can utilize the additional hardware capabilities provided by vanderpool technology. C states disabl...
Page 47
Chapter 3 – bios setup 7 epic bo ar d epic -k bs 7 3.4.2 sata configuration options summary: sata controller(s) enabled optimal default, failsafe default disabled enable or disable sata device. Sata mode ahci mode optimal default, failsafe default raid mode determines how sata controller(s) operate....
Page 48
Chapter 3 – bios setup 8 epic bo ar d epic -k bs 7 enabled designates this port as hot pluggable..
Page 49
Chapter 3 – bios setup 9 epic bo ar d epic -k bs 7 3.4.3 sio configuration.
Page 50
Chapter 3 – bios setup 10 epic bo ar d epic -k bs 7 3.4.3.1 serial port configuration options summary: use this device disabled enabled optimal default, failsafe default en/disable serial port (com) possible: use automatic settings optimal default, failsafe default io=2f8; irq=3; io=3f8; irq=4; sele...
Page 51
Chapter 3 – bios setup 11 epic bo ar d epic -k bs 7 3.4.4 hardware monitor options summary: fan1 smart fan control manual rpm mode manual duty mode auto rpm mode optimal default, failsafe default auto duty-cycle mode.
Page 52
Chapter 3 – bios setup 12 epic bo ar d epic -k bs 7 3.4.4.1 cpu smart fan mode configuration options summary: manual setting 3000 optimal default, failsafe default set fan at fixed rpm.
Page 53
Chapter 3 – bios setup 13 epic bo ar d epic -k bs 7 options summary: manual setting 60 optimal default, failsafe default set fan at fixed duty-cycle min=0 max=100 please input dec number:.
Page 54
Chapter 3 – bios setup 14 epic bo ar d epic -k bs 7.
Page 55
Chapter 3 – bios setup 15 epic bo ar d epic -k bs 7 3.4.5 usb configuration options summary: legacy usb support enabled optimal default, failsafe default disabled auto enables bios support for legacy usb support. When enabled, usb can be functional in legacy environment like dos. Auto option disable...
Page 56
Chapter 3 – bios setup 16 epic bo ar d epic -k bs 7 if auto. Usb devices less than 530mb will be emulated as floppy and remaining as floppy and remaining as hard drive. Forced fdd option can be used to force a hdd formatted drive to boot as fdd(ex. Zip drive) usb port 0/1 function routing fch usb po...
Page 57
Chapter 3 – bios setup 17 epic bo ar d epic -k bs 7.
Page 58
Chapter 3 – bios setup 18 epic bo ar d epic -k bs 7 3.4.7 power management options summary: power mode atx type optimal default, failsafe default at type select power supply mode. Restore on power loss last state optimal default, failsafe default power on power off select power state when power is r...
Page 59
Chapter 3 – bios setup 19 epic bo ar d epic -k bs 7 enable or disable system wake on alarm event. When enabled, system will wake on the hr::min::sec specified.
Page 60
Chapter 3 – bios setup 20 epic bo ar d epic -k bs 7 3.5 submenu chipset.
Page 61
Chapter 3 – bios setup 21 epic bo ar d epic -k bs 7 3.5.1 system agent (sa) configuration options summary: max tolud dynamic optimal default, failsafe default 1 gb 1.25 gb 1.5 gb 1.75 gb 2 gb 2.25 gb 2.5 gb 2.75 gb 3 gb 3.25 gb maximum value of tolud dynamic assignment would adjust tolud automatical...
Page 62
Chapter 3 – bios setup 22 epic bo ar d epic -k bs 7 peg port gen speed auto optimal default, failsafe default gen1 gen2 gen3 configure ped 0:1:0 max speed.
Page 63
Chapter 3 – bios setup 23 epic bo ar d epic -k bs 7 3.5.1.1 graphics configuration options summary: primary display auto optimal default, failsafe default igfx peg pcie select which of igfx/peg graphics dvice should be primary display. Primary igfx boot display vbios default optimal default, failsaf...
Page 64
Chapter 3 – bios setup 24 epic bo ar d epic -k bs 7 select the video device which will be activated during post. This has no effect if external graphic present. Secondary boot display selection will appear based on your selection. Secondary igfx boot display disabled optimal default, failsafe defaul...
Page 65
Chapter 3 – bios setup 25 epic bo ar d epic -k bs 7 3.5.1.2 lvds panel configuration options summary: lvds disabled enabled optimal default, failsafe default enable/disabled this panel. Lvds panel type 640x480@60hz 800x480@60hz 800x600@60hz 1024x600@60hz 1024x768@60hz optimal default, failsafe defau...
Page 66
Chapter 3 – bios setup 26 epic bo ar d epic -k bs 7 1440x900@60hz 1600x1200@60hz 1920x1080@60hz 1920x1200@60hz select lcd panel used by internal graphics device by selecting the appropriate setup item. Color depth 18-bit optimal default, failsafe default 24-bit 36-bit 48-bit select panel type backli...
Page 67
Chapter 3 – bios setup 27 epic bo ar d epic -k bs 7 500hz 1khz 2.2khz 6.5khz select pwm frequency of backlight control signal.
Page 68
Chapter 3 – bios setup 28 epic bo ar d epic -k bs 7 3.5.2 pch-io configuration options summary: full-minicard slot function sata optimal default, failsafe default pcie switch minicard slot function (excluding h110 sku) pci express root port 15 disabled enabled optimal default, failsafe default contr...
Page 69
Chapter 3 – bios setup 29 epic bo ar d epic -k bs 7.
Page 70: Removing The Password
Chapter 3 – bios setup 30 epic bo ar d epic -k bs 7 3.6 security change user/supervisor password you can install a supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the setup utility...
Page 71
Chapter 3 – bios setup 31 epic bo ar d epic -k bs 7 highlight this item and type in the current password. At the next dialog box press enter to disable password protection..
Page 72
Chapter 3 – bios setup 32 epic bo ar d epic -k bs 7 3.7 submenu: boot options summary: quiet boot disabled enabled optimal default, failsafe default en/disable showing boot logo. Launch pxe oprom disabled optimal default, failsafe default enabled controls the execution of uefi and legacy pxe oprom.
Page 73
Chapter 3 – bios setup 33 epic bo ar d epic -k bs 7 3.7.1 bbs priorities.
Page 74
Chapter 3 – bios setup 34 epic bo ar d epic -k bs 7 3.8 submenu: exit.
Page 75
Epic bo ar d epic -k bs 7 chapter 4 chapter 4 – drivers installation.
Page 76
Chapter 4 – driver installation 2 epic bo ar d epic -k bs 7 4.1 product cd/dvd the epic-kbs7 comes with a product dvd that contains all the drivers and utilities you need to setup your product. Insert the dvd and follow the steps in the autorun program to install the drivers. In case the program doe...
Page 77
Chapter 4 – driver installation 3 epic bo ar d epic -k bs 7 2. Open the .Exe file in the folder 3. Follow the instructions 4. Drivers will be installed automatically step 4 – install audio driver 1. Open the step4 – audio folder and select your os 2. Open the setup.Exefile in the folder 3. Follow th...
Page 78
Chapter 4 – driver installation 4 epic bo ar d epic -k bs 7 4. Drivers will be installed automatically step 9 – install usb 3.0 driver 1. Open the step9 – usb 3.0 folder and select your os 2. Open the setup.Exefile in the folder 3. Follow the instructions 4. Drivers will be installed automatically.
Page 79
Epic bo ar d epic -k bs 7 appendix a appendix a - watchdog timer programming.
Page 80
Appendix a – watchdog timer programming 6 epic bo ar d epic -k bs 7 a.1 watchdog timer initial program table 2 : watchdog relative register table ldn register bitnum value note timer counter 0x07(note3) 0xf6(note4) (note24) time of watchdog timer (0~255) this register is byte access counting unit 0x...
Page 81
Appendix a – watchdog timer programming 7 epic bo ar d epic -k bs 7 ************************************************************************************ // superio relative definition (please reference to table 1) #define byte sioindex //this parameter is represented from note1 #define byte siodata ...
Page 82
Appendix a – watchdog timer programming 8 epic bo ar d epic -k bs 7 ************************************************************************************ void main(){ // procedure : aaeonwdtconfig // (byte)timer : time of wdt timer.(0x00~0xff) // (boolean)unit : select time unit(0: second, 1: minute)...
Page 83
Appendix a – watchdog timer programming 9 epic bo ar d epic -k bs 7 ************************************************************************************ // procedure : aaeonwdtenable void aaeonwdtenable (){ wdtenabledisable(enableldn, enablereg, enablebit, 1); } // procedure : aaeonwdtconfig void aa...
Page 84
Appendix a – watchdog timer programming 10 epic bo ar d epic -k bs 7 ************************************************************************************ void sioentermbpnpmode(){ iowritebyte(sioindex, 0x87); iowritebyte(sioindex, 0x87); } void sioexitmbpnpmode(){ iowritebyte(sioindex, 0xaa); } void...
Page 85
Epic bo ar d epic -k bs 7 appendix b appendix b - i/o information.
Page 86
Appendix b – i/o information 12 epic bo ar d epic -k bs 7 b.1 i/o address map.
Page 87
Appendix b – i/o information 13 epic bo ar d epic -k bs 7.
Page 88
Appendix b – i/o information 14 epic bo ar d epic -k bs 7 b.2 memory address map.
Page 89
Appendix b – i/o information 15 epic bo ar d epic -k bs 7.
Page 90
Appendix b – i/o information 16 epic bo ar d epic -k bs 7 b.3 irq mapping chart.
Page 91
Appendix b – i/o information 17 epic bo ar d epic -k bs 7.
Page 92
Epic bo ar d epic -k bs 7 appendix c appendix b – mating connector information.
Page 93
Epic bo ar d epic -k bs 7 b.1 mating connector connector label function mating connector available cable cable p/n vendor model no cn1 lvds invertor connector jst phr-5 na na cn2 +9~24v vin connector n/a n/a power cable 1702002010 cn3 lvds connector hirose df13-30ds -1.25c n/a n/a cn4 external +5vsb...
Page 94
Epic bo ar d epic -k bs 7 cable cn24 digital i/o connector neltron 2026b-10 n/a n/a cn26 com port 4 connector molex 51021-0900 serial port cable 1701090150