- DL manuals
- Aaeon
- Motherboard
- FSB-B75H
- User Manual
Aaeon FSB-B75H User Manual - General
Summary of FSB-B75H
Page 1
F u l l - s i z e s b c f s b - b 7 5 h fsb-b75h intel ® core tm i7/i5/i3 lga 1155 processor full-size cpu card with ddr3, 2 gigabit ethernet usb 3.0, sata 6.0gb/s fsb-b75h manual rev.A 2nd ed. July 2013.
Page 2
F u l l - s i z e s b c f s b - b 7 5 h i copyright notice this document is copyrighted, 2013. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, cop...
Page 3
F u l l - s i z e s b c f s b - b 7 5 h ii acknowledgments all other products’ name or trademarks are properties of their respective owners. ami is a trademark of american megatrends inc. intel ® , core™ are trademarks of intel ® corporation. microsoft windows ® is a registered trademark of mi...
Page 4
F u l l - s i z e s b c f s b - b 7 5 h iii packing list before you begin installing your card, please make sure that the following materials have been shipped: 1 serial port cable with one db-9 connector 1 cable with serial port and lpt port 1 usb cable 4 sata cables 1 dvd-rom for manual ...
Page 5
F u l l - s i z e s b c f s b - b 7 5 h iv contents chapter 1 general information 1.1 introduction................................................................ 1-2 1.2 features .................................................................... 1-3 1.3 specifications ...............................
Page 6: Appendix B I/o Information
F u l l - s i z e s b c f s b - b 7 5 h v chapter 4 driver installation 4.1 installation ................................................................. 4-3 appendix a programming the watchdog timer a.1 programming .........................................................A-2 a.2 w83627dhg watchdog...
Page 7: General
F u l l - s i z e s b c f s b - b 7 5 h chapter 1 general information 1-1 general chapter 1 information.
Page 8
F u l l - s i z e s b c f s b - b 7 5 h chapter 1 general information 1-2 1.1 introduction aaeon, a leading industrial pc manufacturer, announces the debut of a high performance full-size single board computer, the fsb-b75h. Aaeon has developed this full-size sbc based on the latest intel ® b75 chip...
Page 9
F u l l - s i z e s b c f s b - b 7 5 h chapter 1 general information 1- 3 1.2 features intel ® 3 rd generation core tm i7/i5/i3 lga 1155 processor intel ® b75 chipset dual-channel ddr3 1333/1600 dimm socket x 2 (up to 16 gb) intel ® b75 integrated intel ® hd graphics gigabit ethernet x 2 sata 6.0 g...
Page 10
F u l l - s i z e s b c f s b - b 7 5 h chapter 1 general information 1-4 1.3 specification system form factor picmg 1.3 full size sbc processor intel ® 3 rd generation core tm i7/i5/i3 lga 1155 processor system memory 240-pin dual-channel ddr3 1333/1600 dimm socket x 2, up to 16gb chipset intel...
Page 11
F u l l - s i z e s b c f s b - b 7 5 h chapter 1 general information 1- 5 non-condensing display chipset intel ® b75 graphic engine integrated intel ® hd graphics resolution up to 2048x1536 @ 75hz for crt output interface dvi x 1 on bracket, vga (optional) i/o storage sata 6.0 gb/s x 1, sata 3.0 ...
Page 12: Quick
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 1 quick installation chapter 2 guide.
Page 13
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 2 2.1 safety precautions always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive elect...
Page 14
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 3 2.2 location of connectors and jumpers.
Page 15
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 4 2.3 mechanical drawing.
Page 16: Jumpers
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 5 2.4 list of jumpers the board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: jumpers label function jp2 auto ...
Page 17
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 6 dio1 digital i/o pin header fdd1 floppy pin header lpt1 parallel port pin header usb1 usb 3.0 pin header usb2 usb pin header usb4 usb connector usb5 usb 3.0 pin header usb6 usb connector bt1 battery sata1~sata3 sata con...
Page 18
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 7 2.6 setting jumpers you configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protec...
Page 19
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 8 2.7 auto power button (jp2) jp2 function 1-2 power on by button (default) 2-3 auto power on 2.8 clear cmos (jp3) jp3 function 1-2 protected (default) 2-3 clear 2.9 front panel connector (fp1) pin signal pin signal 1 pow...
Page 20
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 9 2.11 digital i/o pin header (dio1) pin signal pin signal 1 dio_30 2 dio_31 3 dio_32 4 dio_33 5 dio_34 6 dio_35 7 dio_36 8 dio_37 9 +5v 10 gnd 2.12 usb3.0 port pin header (usb1, usb5) pin signal pin signal 1 vcc 20 nc 2 ...
Page 21
F u l l - s i z e s b c f s b - b 7 5 h chapter 2 quick installation guide 2 - 10 below table for china rohs requirements 产品中有毒有害物质或元素名称及含量 aaeon main board/ daughter board/ backplane 有毒有害物质或元素 部件名称 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 × ○ ○ ○ ○ ○ 外部信号 连接器及线材 × ○ ○ ...
Page 22: Ami
F u l l - s i z e s b c f s b - b 7 5 h chapter 3 ami bios setup 3-1 ami chapter 3 bios setup.
Page 23
F u l l - s i z e s b c f s b - b 7 5 h 3.1 system test and iinitialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and n...
Page 24
F u l l - s i z e s b c f s b - b 7 5 h 3.2 ami bios setup ami bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram and bios nvram so that it retains the setup information when the power is tur...
Page 25
F u l l - s i z e s b c f s b - b 7 5 h setup menu setup submenu: main chapter 3 ami bios setup 3-4.
Page 26
F u l l - s i z e s b c f s b - b 7 5 h setup submenu: advanced chapter 3 ami bios setup 3-5.
Page 27
F u l l - s i z e s b c f s b - b 7 5 h acpi settings options summary : s1 only (cpu stop clock) acpi sleep state s3 only (suspend to ram) default select acpi sleep state the system will enter when the suspend button is pressed. Chapter 3 ami bios setup 3-6.
Page 28
F u l l - s i z e s b c f s b - b 7 5 h cpu configuration options summary : disabled hyper-threading enabled default enabled for windows xp and linux (os optimized for hyper-threading technology) and disabled for other os (os not optimized for hyper-threading technology). When disabled only one thre...
Page 29
F u l l - s i z e s b c f s b - b 7 5 h when enabled, a vmm can utilize the additional hardware capabilities provided by vanderpool technology sata configuration (ide) chapter 3 ami bios setup 3-8.
Page 30
F u l l - s i z e s b c f s b - b 7 5 h sata configuration (ahci) options summary : enabled default sata controller(s) disabled enable or disable sata device. Ide default sata mode selection ahci determines how sata controller(s) operate. Chapter 3 ami bios setup 3-9.
Page 31
F u l l - s i z e s b c f s b - b 7 5 h usb configuration options summary : enabled default disabled legacy usb support auto enable legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices available only for efi applications. Enabl...
Page 32
F u l l - s i z e s b c f s b - b 7 5 h w83627dhg super io configuration options summary : floppy disk controller configuration set parameters of floppy disk controller (fdc) serial port 1 configuration set parameters of serial port 1 (coma) serial port 2 configuration set parameters of serial port ...
Page 33
F u l l - s i z e s b c f s b - b 7 5 h parallel port configuration set parameters of parallel port (lpt/lpte) always off always on restore ac power loss last state default select ac power state when power is re-applied after a power failure. Floppy disk controller configuration chapter 3 ami bios s...
Page 34
F u l l - s i z e s b c f s b - b 7 5 h options summary : disabled floppy disk controller enabled default enable or disable floppy disk controller serial port 1 configuration options summary : disabled serial port enabled default enable or disable serial port (com) change settings auto default chapt...
Page 35
F u l l - s i z e s b c f s b - b 7 5 h io=3f8h; irq=4 io=2f8h; irq=3 select an optimal setting for super io device. Serial port 2 configuration options summary : disabled serial port enabled default enable or disable serial port (com) chapter 3 ami bios setup 3-14.
Page 36
F u l l - s i z e s b c f s b - b 7 5 h auto default io=2f8h; irq=3 change settings io=3f8h; irq=4 select an optimal setting for super io device. Rs232 default rs422 rs232/422,485 rs485 rs232/422,485 switch parallel port configuration chapter 3 ami bios setup 3-15.
Page 37
F u l l - s i z e s b c f s b - b 7 5 h options summary : disabled parallel port enabled default enable or disable parallel port (lpt/lpte) auto default io=378h; irq=5 io=378h; irq=5,6,7,10,11,12 io=278h; irq=5,6,7,10,11,12 change settings io=3bch; irq=5,6,7,10,11,12 select an optimal setting for su...
Page 38
F u l l - s i z e s b c f s b - b 7 5 h change the printer port mode. W83627dhg hw monitor options summary : disabled smart fan function enabled default enable or disable smart fan smart fan mode configuration smart fan mode select chapter 3 ami bios setup 3-17.
Page 39
F u l l - s i z e s b c f s b - b 7 5 h smart fan mode configuration options summary : manual mode default thermal cruise mode sys smart fan mode fan speed cruise mode sys smart fan mode select sysfan pwm/dc voltage output 0~255 default : 255 input expect pwm output value(range:0 – 255) chapter 3 am...
Page 40
F u l l - s i z e s b c f s b - b 7 5 h manual mode default thermal cruise mode fan speed cruise mode cpu smart fan 0 mode smart fan iii mode cpu smart fan 0 mode select cpufan0 pwm/dc voltage output 0~255 default : 255 input expect pwm output value(range: 0 – 255) it’s also the fan output initial v...
Page 41
F u l l - s i z e s b c f s b - b 7 5 h dynamic digital io( default disabled) chapter 3 ami bios setup 3-20
Page 42
F u l l - s i z e s b c f s b - b 7 5 h dynamic digital io(enabled) options summary : dynamic digital io configuration dynamic digital io configuration chapter 3 ami bios setup 3-21.
Page 43
F u l l - s i z e s b c f s b - b 7 5 h dynamic digital io configuration options summary : input default dio0 direction output set digital io as input or output input default dio1 direction output set digital io as input or output input default dio2 direction output set digital io as input or output...
Page 44
F u l l - s i z e s b c f s b - b 7 5 h input default dio3 direction output set digital io as input or output input dio4 direction output default set digital io as input or output input dio5 direction output default set digital io as input or output input dio6 direction output default set digital io...
Page 45
F u l l - s i z e s b c f s b - b 7 5 h s5 rtc wake settings options summary : disabled default wake system with fixed time enabled enable or disable system wake on alarm event. When enabled, system will wake on the hr::min::sec specified disabled default wake system with dynamic time enabled enable...
Page 46
F u l l - s i z e s b c f s b - b 7 5 h setup submenu: chipset options summary : system agent (sa) configuration system agent (sa) parameters pch-io configuration pch parameters chapter 3 ami bios setup 3-25.
Page 47
F u l l - s i z e s b c f s b - b 7 5 h system agent (sa) configuration options summary : graphics configuration configure pego b0:d1:f0 fen1-gen3 chapter 3 ami bios setup 3-26.
Page 48
F u l l - s i z e s b c f s b - b 7 5 h graphics configuration options summary : auto default igfx peg primary display pci select which of igfx/peg/pci graphics device should be primary display or select sg for switchable gfx. Internal graphics auto chapter 3 ami bios setup 3-27.
Page 49
F u l l - s i z e s b c f s b - b 7 5 h disabled enabled keep igd enabled based on the setup options. 32m 64m default 96m 128m 160m 192m 224m 256m 288m 320m 352m 384m 416m dvmt pre-allocated 448m chapter 3 ami bios setup 3-28.
Page 50
F u l l - s i z e s b c f s b - b 7 5 h 480m 512m 1024m select dvmt 5.0 pre-allocated (fixed) graphics memory size used by the internal graphics device. 128m 256m dvmt total gfx mem max default select dvmt5.0 total graphic memory size used by the internal graphics device. Vbios default default crt p...
Page 51
F u l l - s i z e s b c f s b - b 7 5 h pch-io configuration options summary : atx type default power mode at type select power supply mode. Pci express configuration pci express configuration settings pch azalia configuration pch azalia configuration settings. Disabled default onboard lan 1 enabled...
Page 52
F u l l - s i z e s b c f s b - b 7 5 h en/disable onboard lan 1 (rtl8111e) disabled onboard lan 2 enabled default en/disable onboard lan 2 (rtl8111e) disabled ri# wake enabled default for en/disable ring in wake up function. Attention please, when this function is enabled, some devices which connec...
Page 53
F u l l - s i z e s b c f s b - b 7 5 h pci express configuration options summary : disabled pci express root port 1 enabled default control the pci express root port. Auto gen 1 pcie speed gen 2 select pci express port speed. Disabled pci express root port 2 enabled default chapter 3 ami bios setup...
Page 54
F u l l - s i z e s b c f s b - b 7 5 h control the pci express root port. Auto gen 1 pcie speed gen 2 select pci express port speed. Disabled pci express root port 3 enabled default control the pci express root port. Auto gen 1 pcie speed gen 2 select pci express port speed. Disabled pci express ro...
Page 55
F u l l - s i z e s b c f s b - b 7 5 h pch azalia configuration options summary : disabled enabled azalia auto default control detection of the azalia device. Disabled = azalia will be unconditionally disabled enabled = azalia will be unconditionally enabled auto = azalia will be enabled if present...
Page 56
F u l l - s i z e s b c f s b - b 7 5 h setup submenu: boot boot option priorities options summary : your device boot option #x your device sets the system boot order chapter 3 ami bios setup 3-35.
Page 57
F u l l - s i z e s b c f s b - b 7 5 h setup submenu: security change user/supervisor password you can install a supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the setup utility....
Page 58
F u l l - s i z e s b c f s b - b 7 5 h chapter 3 ami bios setup 3-37 setup utility. Removing the password highlight this item and type in the current password. At the next dialog box press enter to disable password protection. Setup submenu: exit.
Page 59: Driver
F u l l - s i z e s b c f s b - b 7 5 h chapter 4 driver installation 4-1 driver chapter 4 installation.
Page 60
F u l l - s i z e s b c f s b - b 7 5 h chapter 4 driver installation 4-2 the fsb-b75h comes with a dvd-rom that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: step 1 – install chipset driver step 2 – install vga driver step 3 – install lan...
Page 61
F u l l - s i z e s b c f s b - b 7 5 h chapter 4 driver installation 4-3 4.1 installation: insert the fsb-b75h dvd-rom into the dvd-rom drive. And install the drivers from step 1 to step 7 in order. Step 1 – install chipset driver 1. Click on the step 1-chipset folder and double click on the infins...
Page 62
F u l l - s i z e s b c f s b - b 7 5 h chapter 4 driver installation 4-4 step 4 – install audio driver 1. Click on the step 4-audio folder and select the os folder your system is 2. Double click on the .Exe file located in each os folder 3. Follow the instructions that the window shows 4. The syste...
Page 63: Programming The
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-1 programming the appendix a watchdog timer.
Page 64
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-2 a.1 programming fsb-b75h utilizes w83627dhg chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the aaeon intial watchdog timer program is also attached based on whi...
Page 65
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-3 (3) exit the w83627dhg config mode. Undesired result may occur if the config mode is not exited normally. (1) enter the w83627dhg config mode to enter the w83627dhg config mode, two special i/o write operations are...
Page 66
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-4 1 r/w 0: gpio5 is inactive. 1: gpio5 is active. 0 r/w 0: wdto# and pled are inactive. 1: wdto# and pled are inactive. Cr f5h. (wdto# and kbc p20 control mode register; default 00h) bit read/write description 7~5 re...
Page 67
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-5 01h: time-out occurs after 1 second/minute 02h: time-out occurs after 2 second/minutes 03h: time-out occurs after 3 second/minutes ………………………………………………….. Ffh: time-out occurs after 255 second/minutes cr f7h. (wdto# ...
Page 68
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-6 a.2 w83627dhg watchdog timer initial program ldn register bit description wdt timer value 0x07 0xf6 bit [7-0] 00h: time-out disable 01h: time-out occurs after 1 minute only. 02h: time-out occurs after 2 second/minu...
Page 69
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-7 ************************************************************************************ // procedure : aaeonwdtconfig void aaeonwdtconfig (void){ byte val; //super i/o entry key outportb(sioindex,0x87); outportb(sioin...
Page 70
F u l l - s i z e s b c f s b - b 7 5 h appendix a programming the watchdog timer a-8 ************************************************************************************ // procedure : void aaeonwdtenable (byte timer, boolean unit){ byte val; //super i/o entry key outportb(sioindex,0x87); outportb(...
Page 71: I/o Information
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-1 i/o information appendix b.
Page 72
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-2 b.1 i/o address map.
Page 73
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-3.
Page 74
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-4 b.2 1 st mb memory address map.
Page 75
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-5 b.3 irq mapping chart.
Page 76
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-6.
Page 77
F u l l - s i z e s b c f s b - b 7 5 h appendix b i/o information b-7 b.4 dma channel assignments.
Page 78: Mating Connector
F u l l - s i z e s b c f s b - b 7 5 h appendix c mating connector c - 1 mating connector appendix c.
Page 79
F u l l - s i z e s b c f s b - b 7 5 h appendix c mating connector c - 2 c.1 list of mating connectors and cables the table notes mating connectors and available cables. Mating connector connector label function vendor model no available cable cable p/n sata1 sata connector techbest 161s01-029a-l s...
Page 80
F u l l - s i z e s b c f s b - b 7 5 h appendix c mating connector c - 3 cpu_fan fan connector catch electronics 1190-700-042 n/a sys_fan1 fan connector catch electronics 1190-700-042 n/a dimm1 ddr3 204pin skt kortak ar240h-101b- a0h n/a dimm2 ddr3 204pin skt kortak ar240h-101b- a0h n/a fdd1 floppy...
Page 81: Ahci Settings
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d - 1 ahci settings a ppendix d.
Page 82
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-2 d.1 setting ahci os installation to setup ahci mode step 1: copy the files below from the driver cd: step 6 - ahci\driver\winxp_32 or winxp_64 to disk. Step 2: connect the usb floppy disk with the ahci files to the board..
Page 83: Type
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-3 step 3: to install “in bios setup menu”, select advanced -> sata configuration -> sata mode selection -> ahci step 4: next, select boot -> boot option #1 -> dvd rom type.
Page 84
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-4 step 5: to save, select save & exit -> save changes and exit step 6: setup os.
Page 85
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-5 step 7: press “f6” step 8: choose “s”.
Page 86
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-6 step 9: mobile choose “intel(r) 7 series chipset family sata ahci controller” desktop choose “intel(r) 7 series/c216 chipset family sata ahci controller”.
Page 87
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-7 step 10: select “enter” to choose the model number mobile desktop.
Page 88
F u l l - s i z e s b c f s b - b 7 5 h appendix d ahci settings d-8 step 11: setup is loading files.