Aaeon FSB-H81H Manual - Quick

Manual is about: Full-Size, Intel Core i7 / i5 / i3, LGA 1150 Processor, Full-size CPU Card, With DDR3 / L, 2 Gigabit Ethernet USB 3.0 / USB2.0, SATA 6.0Gb/s, SATA 3.0 Gb/s

Summary of FSB-H81H

  • Page 1

    F u l l - s i z e s b c f s b - h 8 1 h fsb-h81h intel ® core tm i7/i5/i3 lga 1150 processor full-size cpu card with ddr3/l, 2 gigabit ethernet usb 3.0/ usb2.0 sata 6.0gb/s, sata 3.0 gb/s fsb-h81h manual rev.A 1st ed. August 15, 2014.

  • Page 2

    F u l l - s i z e s b c f s b - h 8 1 h i copyright notice this document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, cop...

  • Page 3

    F u l l - s i z e s b c f s b - h 8 1 h ii acknowledgments all other products ’ name or trademarks are properties of their respective owners.  ami is a trademark of american megatrends inc.  intel ® , core ™ are trademarks of intel ® corporation.  microsoft windows ® is a registered trademark of ...

  • Page 4

    F u l l - s i z e s b c f s b - h 8 1 h iii packing list before you begin installing your card, please make sure that the following materials have been shipped: 1 cable set o 1 serial port cable with one db-9 connector o 2 serial port cable with two db-9 connectors o 1 cable with serial port (db-9) ...

  • Page 5

    F u l l - s i z e s b c f s b - h 8 1 h iv contents chapter 1 general information 1.1 introduction ................................................................ 1-2 1.2 features .................................................................... 1-3 1.3 specifications ..............................

  • Page 6

    F u l l - s i z e s b c f s b - h 8 1 h v 2.16 com port 4 (cn5) ................................................... 2-12 2.17 com port 3 (cn6) ................................................... 2-12 2.18 com port 2 (rs232/485/422) (cn7) ...................... 2-13 2.19 com port 1 (rs232/485/422) (c...

  • Page 7: Appendix B I/o Information

    F u l l - s i z e s b c f s b - h 8 1 h vi 2.41 ddr3/ddr3l dimm slot (dimm2) ......................... 2-32 chapter 3 ami bios setup 3.1 system test and initialization. .................................. 3-2 3.2 ami bios setup ........................................................ 3-3 chapter 4 dr...

  • Page 8: General

    F u l l - s i z e s b c f s b - h 8 1 h chapter 1 general information 1-1 general information chapter 1.

  • Page 9

    F u l l - s i z e s b c f s b - h 8 1 h chapter 1 general information 1-2 1.1 introduction aaeon, a leading industrial pc manufacturer, announces the debut of a high performance full-size single board computer, the fsb-h81h. Aaeon has developed this full-size sbc based on the latest intel ® h81 chip...

  • Page 10

    F u l l - s i z e s b c f s b - h 8 1 h chapter 1 general information 1- 3 1.2 features intel ® 4 th generation core tm i7/i5/i3 lga 1150 processor intel ® h81 chipset dual-channel ddr3/ddr3l 1333/1600 dimm socket x 2 (up to 16 gb) intel ® h81 integrated intel ® hd graphics gigabit ethernet x 2 sata...

  • Page 11

    F u l l - s i z e s b c f s b - h 8 1 h chapter 1 general information 1-4 1.3 specification system form factor picmg 1.3 full size sbc processor intel ® 4 th generation core tm i7/i5/i3 lga 1150 processor system memory 240-pin dual-channel ddr3/ddr3l 1333/1600 dimm socket x 2, up to 16gb chipset int...

  • Page 12

    F u l l - s i z e s b c f s b - h 8 1 h chapter 1 general information 1- 5 mtbf (hours) 60,000 display chipset intel ® h81 graphic engine integrated intel ® hd graphics resolution up to 2048x1536 @ 75hz for crt output interface vga x 1 or dvi x 1 on bracket i/o: fintek 81866d storage sata 6.0 gb/s x...

  • Page 13: Quick

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 1 quick installation guide chapter 2.

  • Page 14

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 2 2.1 safety precautions always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive elect...

  • Page 15

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 3 2.2 location of connectors and jumpers.

  • Page 16

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 4 2.3 mechanical drawing.

  • Page 17: Jumpers

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 5 2.4 list of jumpers the board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: jumpers label function cn10 com1...

  • Page 18

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 6 cn7 com port 2 (rs232/422/485) cn8 com port 1 (rs232/422/485) cn9 usb 2.0 port 2/3 cn12 digital io port cn13 high definition audio cn14 ps/2 keyboard/mouse cn15 parallel port pin header cn16 sata port 2 cn17 sata port 3...

  • Page 19

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 7 2.6 setting jumpers you configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protec...

  • Page 20

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 8 2.7 com1 ri/+5/+12v selection (cn10) +12v ring +5v cn10 function 1-2 +12v 3-4 ring (default) 5-6 +5v 2.8 com2 ri/+5/+12v selection (cn11) +12v ring +5v cn11 function 1-2 +12v 3-4 ring (default) 5-6 +5v 2.9 auto power bu...

  • Page 21

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 9 cn24 function 1-2 power on by button (default) 2-3 auto power on 2.10 cmos rtc setting (cn29) 1 2 3 1 2 3 normal clear cmos cn29 function 1-2 normal (default) 2-3 clear cmos 2.11 pci clock feedback setting (cn34) pci cl...

  • Page 22

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 10 pin signal pin signal 1 pwr_btn (+) 2 h/w reset (+) 3 pwr_btn (-) 4 h/w reset (-) 5 hdd_led (+) 6 pwr_led (+) 7 hdd_led (-) 8 pwr_led (-) 2.13 front panel connector 2 (cn2) pin signal pin signal 1 external speaker (+) ...

  • Page 23

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 11 2 rx in 3 tx out ±9v 4 dtr out ±9v 5 gnd gnd 6 dsr in 7 rts out ±9v 8 cts in 9 ri in 10 nc 2.15 com port 5 (cn4) pin pin name signal type signal level 1 dcd in 2 rx in 3 tx out ±9v 4 dtr out ±9v 5 gnd gnd 6 dsr in 7 rt...

  • Page 24

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 12 9 ri in 10 nc 2.16 com port 4 (cn5) pin pin name signal type signal level 1 dcd in 2 rx in 3 tx out ±9v 4 dtr out ±9v 5 gnd gnd 6 dsr in 7 rts out ±9v 8 cts in 9 ri in 10 nc 2.17 com port 3 (cn6).

  • Page 25

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 13 pin pin name signal type signal level 1 dcd in 2 rx in 3 tx out ±9v 4 dtr out ±9v 5 gnd gnd 6 dsr in 7 rts out ±9v 8 cts in 9 ri in 10 nc 2.18 com port 2 (rs232/485/422) (cn7) rs-232 pin pin name signal type signal lev...

  • Page 26

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 14 5 gnd gnd 6 dsr in 7 rts out ±9v 8 cts in 9 ri/+5v/+12v in/ pwr +5v/+12v 10 nc rs-422 pin pin name signal type signal level 1 rs422_tx- out 2 rs422_tx+ out 3 rs422_rx+ in 4 rs422_rx- in 5 gnd gnd 6 nc 7 nc 8 nc 9 nc/+5...

  • Page 27

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 15 4 nc 5 gnd gnd 6 nc 7 nc 8 nc 9 nc/+5v/+12v pwr +5v/+12v 10 nc 2.19 com port 1 (rs232/485/422) (cn8) rs-232 pin pin name signal type signal level 1 dcd in 2 rx in 3 tx out ±9v 4 dtr out ±9v 5 gnd gnd 6 dsr in 7 rts out...

  • Page 28

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 16 9 ri/+5v/+12v in/ pwr +5v/+12v 10 nc rs-422 pin pin name signal type signal level 1 rs422_tx- out 2 rs422_tx+ out 3 rs422_rx+ in 4 rs422_rx- in 5 gnd gnd 6 nc 7 nc 8 nc 9 nc/+5v/+12v pwr +5v/+12v 10 nc rs-485 pin pin n...

  • Page 29

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 17 8 nc 9 nc/+5v/+12v pwr +5v/+12v 10 nc 2.20 usb 2.0 port 2/3 (cn9) 1 2 3 4 5 6 7 8 9 10 pin pin name signal type signal level 1 +5vsb pwr +5v 2 gnd gnd 3 usb2_d- diff 4 gnd gnd 5 usb2_d+ diff 6 usb3_d+ diff 7 gnd gnd 8 ...

  • Page 30

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 18 2.21 digital io port (cn12) 1 2 3 4 5 6 7 8 9 10 pin pin name signal type signal level 1 dio1 i/o +5v 2 dio2 i/o +5v 3 dio3 i/o +5v 4 dio4 i/o +5v 5 dio5 i/o +5v 6 dio6 i/o +5v 7 dio7 i/o +5v 8 dio8 i/o +5v 9 +5v pwr +...

  • Page 31

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 19 2 hda_sync out 3 hda_sdi0 in 4 hda_sdo out 5 audio_det# in 6 hda_bclk out 7 gnd gnd 8 +5v pwr +5v 9 +5vsb pwr +5v 10 +3.3v pwr +3.3v 2.23 ps/2 kb/ms pin header (cn14) pin pin name signal type signal level 1 kb_ data i/...

  • Page 32

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 20 2.24 lpt port (cn15) pin pin name signal type signal level 1 strobe# in 2 afd# i/o 3 pd0 i/o 4 error# in 5 pd1 i/o 6 print# i/o 7 pd2 i/o 8 slin# i/o 9 pd3 i/o 10 gnd gnd 11 pd4 i/o 12 gnd gnd 13 pd5 i/o 14 gnd gnd 15 ...

  • Page 33

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 21 16 gnd gnd 17 pd7 i/o 18 gnd gnd 19 ack# in 20 gnd gnd 21 busy in 22 gnd gnd 23 pe in 24 gnd gnd 25 slct in 26 nc 2.25 sata port 2 (cn16) pin 1 pin 7 pin pin name signal type signal level 1 gnd gnd 2 sata_tx4+ diff 3 s...

  • Page 34

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 22 7 gnd gnd 2.26 sata port 3 (cn17) pin 1 pin 7 pin pin name signal type signal level 1 gnd gnd 2 sata_tx5+ diff 3 sata_tx5- diff 4 gnd gnd 5 sata_rx5- diff 6 sata_rx5+ diff 7 gnd gnd 2.27 usb 3.0 port 0 (cn18) pin pin n...

  • Page 35

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 23 2 usb0_d- diff 3 usb0_d+ diff 4 gnd gnd 5 usb1_ssrx− diff 6 usb1_ssrx+ diff 7 gnd gnd 8 usb1_sstx− diff 9 usb1_sstx+ diff 2.28 sata port 0 (cn19) pin 1 pin 7 pin pin name signal type signal level 1 gnd gnd 2 sata_tx0+ ...

  • Page 36

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 24 2.29 sata port 1 (cn20) pin 1 pin 7 pin pin name signal type signal level 1 gnd gnd 2 sata_tx1+ diff 3 sata_tx1- diff 4 gnd gnd 5 sata_rx1- diff 6 sata_rx1+ diff 7 gnd gnd 2.30 usb 3.0 port 1 (cn21) pin pin name signal...

  • Page 37

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 25 2 usb1_d- diff 3 usb1_d+ diff 4 gnd gnd 5 usb2 _ssrx− diff 6 usb2_ssrx+ diff 7 gnd gnd 8 usb2_sstx− diff 9 usb2_sstx+ diff 2.31 10m/100m/1g ethernet port 1 (cn23) 1 act/link led speed led 8 pin pin name signal type sig...

  • Page 38

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 26 lad0 1 12 lad1 lad2 lad3 lframe# lreset# ldrq0 ldrq1 serirq gnd lclk +3.3v 2.32 lpc expansion connector (cn25) pin pin name signal type signal level 1 lad0 i/o +3.3v 2 lad1 i/o +3.3v 3 lad2 i/o +3.3v 4 lad3 i/o +3.3v 5...

  • Page 39

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 27 2.33 spi programming header (debug only) (cn26) pin pin name signal type signal level 1 +3.3v pwr +3.3v 2 gnd gnd 3 cs# i/o 4 clk i/o 5 so i/o 6 si i/o 7 nc 8 nc 2.34 dvi connector (cn27) pin pin name signal type signa...

  • Page 40

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 28 3 gnd gnd 4 vga_ddc_clk i/o 5 vga_ddc _data i/o 6 dvi_ddc_clk i/o +5v 7 dvi_ddc_data i/o +5v 8 vsync out 9 tmds_dat1- diff 10 tmds_dat1+ diff 11 gnd gnd 12 nc 13 nc 14 +5v pwr +5v 15 gnd gnd 16 hplg_detect in 17 tmds_d...

  • Page 41

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 29 c3 blue out c4 hsync out c5 gnd_analog gnd 2.35 vga connector (cn28) pin pin name signal type signal level 1 red out 2 green out 3 blue out 4 nc 5 gnd gnd 6 red_gnd_rtn gnd 7 green_gnd_rtn gnd 8 blue_gnd_rtn gnd 9 +5v ...

  • Page 42

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 30 2.36 fan2 connector (cn30) pin pin name signal type signal level 1 gnd gnd 2 fan_power pwr +12v 3 fan_tac in 4 fan_ctl out 2.37 fan1 connector (cn31) pin pin name signal type signal level 1 gnd gnd 2 fan_power pwr +12v...

  • Page 43

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 31 2.38 atx +12v power connector (cn32) pin pin name signal type signal level 1 gnd gnd 2 gnd gnd 3 +12v pwr +12v 4 +12v pwr +12v 2.39 10m/100m/1g ethernet port 2 (cn33) 1 act/link led speed led 8 pin pin name signal type...

  • Page 44

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 32 6 mdi1- diff 7 mdi3+ diff 8 mdi3- diff 2.40 ddr3/ddr3l dimm slot (dimm1) standard specification. 2.41 ddr3/ddr3l dimm slot (dimm2) standard specification..

  • Page 45

    F u l l - s i z e s b c f s b - h 8 1 h chapter 2 quick installation guide 2 - 33 below table for china rohs requirements 产品中有毒有害物质或元素名称及含量 aaeon main board/ daughter board/ backplane 部件名称 有毒有害物质或元素 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 × ○ ○ ○ ○ ○ 外部信号 连接器及线材 × ○ ○ ...

  • Page 46: Ami

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-1 ami bios setup chapter 3.

  • Page 47

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-2 3.1 system test and iinitialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two...

  • Page 48

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-3 3.2 ami bios setup ami bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram and bios nvram so that it retains the setup info...

  • Page 49

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-4 setup menu setup submenu: main options summary: (default setting) system date day mm:dd:yyyy change the month, year and century. The ‘day’ is changed automatically. System time hh : mm : ss change the clock of the system..

  • Page 50

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-5 setup submenu: advanced options summary: (default setting) acpi settings system acpi parameters cpu configuration cpu configuration parameters dynamic digital io dynamic digital io settings sata configuration sata device options se...

  • Page 51

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-6 usb configuration parameters f81866 super io configuration system super io chip parameters f81866 h/w monitor monitor hardware status s5 rtc wake settings enable system to wake from s5 using rtc alarm.

  • Page 52

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-7 acpi settings options summary: (default setting) acpi sleep state suspend disabled s1 only (cpu stop clock) s3 (suspend to ram) both s1 and s3 available for os to choose from select the highest acpi sleep state the system will ente...

  • Page 53

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-8 cpu configuration options summary: (default setting) hyper-threading disabled enabled enabled/disabled cpu hyper-threading function..

  • Page 54

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-9 dynamic digital io options summary: (default setting) digital port x (gp2x) direction input output select gpix/gpox i/o direction digital port x (gp2x) level hi low select the output level when setting as output ping..

  • Page 55

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-10 sata configuration options summary: (default setting) sata controller(s) enabled disabled configure sata controller operating as legacy ide/ahci mode. Sata mode selection ide ahci configure sata controller operating as legacy ide/...

  • Page 56

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-11 usb configuration options summary: (default setting) legacy usb support enabled disabled auto enables legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices av...

  • Page 57

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-12 f81866 super io configuration options summary: (default setting) serial port x configuration set parameters of serial port x. Parallel port configuration set parameters of parallel port.

  • Page 58

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-13 serial port 1/2 configuration options summary: (default setting) serial port disabled enabled en/disable specified serial port. Change settings auto io=3f8h; irq=4; io=3f8h; irq=3,4; io=2f8h; irq=3,4; select an optimal setting for...

  • Page 59

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-14 rs422 rs485 select an optimal setting for super io device..

  • Page 60

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-15 serial port 3/4/5/6 configuration options summary: (default setting) serial port disabled enabled en/disable specified serial port. Change settings auto io=3f8h; irq=4; io=3f8h; irq=3,4; io=2f8h; irq=3,4; select an optimal setting...

  • Page 61

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-16 parallel port configuration options summary: (default setting) parallel port disabled enabled en/disable parallel port. Change settings auto io=378h; irq=5; io=378h; irq=5, 6, 7, 10, 11, 12; io=278h; irq=5, 6, 7, 10, 11, 12;.

  • Page 62

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-17 io=3bch; irq=5, 6, 7, 10, 11, 12; select an optimal setting for super io device. Device mode std printer mode spp mode epp-1.9 and spp mode epp-1.7 and spp mode ecp mode ecp and epp 1.9 mode ecp and epp 1.7 mode select an optimal ...

  • Page 63

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-18 f81866 h/w monitor options summary: (default setting) smart fan function disabled enabled en/disable specified smart fan function smart fan mode configuration select an optimal setting for smart fan..

  • Page 64

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-19 smart fan mode configuration options summary: (default setting) fan1 smart fan control manual duty mode auto duty-cycle mode smart fan mode select manual duty mode manual mode fan control, from 1-100. Temperature x fan speed will ...

  • Page 65

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-20 s5 rtc wake settings options summary: (default setting) wake system with fixed time disabled enabled enable or disable system wake on alarm event. When enabled, system will wake on the hr::min::sec specified. Wake system with dyna...

  • Page 66

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-21 setup submenu: chipset options summary: (default setting) power mode atx type at select power supply mode. Ri# wake disabled enabled enable/disable ring in wake up function. South bridge south bridge parameters host bridge north b...

  • Page 67

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-22 south bridge options summary: (default setting) restore ac power loss power off power on last state select ac power state when power is re-applied after a power failure azalia disabled enabled auto options for sb hd azalia..

  • Page 68

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-23 pci express root port x disabled enabled control the pci express root port. Hp89 pcie rtl8111e #x disabled enabled control on-board lan device.

  • Page 69

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-24 host bridge options summary: (default setting) graphics configuration configure graphics settings..

  • Page 70

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-25 graphics configuration options summary: (default setting) primary display auto igfx peg pcie select which of igfx/peg/pci graphics device should be primary display internal graphics auto disabled enabled keep igd enabled based on ...

  • Page 71

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-26 setup submenu: boot options summary: (default setting) quiet boot disabled enabled en/disable showing boot logo. Launch pxe oprom. Disabled enabled en/disable pxe boot for rtl8111e lan boot option #x set the system boot order. Har...

  • Page 72

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-27 setup submenu: security options summary: (default setting) administrator password/ user password not set you can install a supervisor password, and if you install a supervisor password, you can then install a user password. A user...

  • Page 73

    F u l l - s i z e s b c f s b - h 8 1 h chapter 3 ami bios setup 3-28 setup submenu: save & exit options summary: (default setting) save changes and reset reset the system after saving the changes discard changes and reset reset system setup without saving any changes restore defaults restore/load d...

  • Page 74: Driver

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-1 driver installation chapter 4.

  • Page 75

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-2 the fsb-h81h comes with a dvd-rom that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: step 1 – install chipset driver step 2 – install vga driver step 3 – install usb...

  • Page 76

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-3 4.1 installation: insert the fsb-h81h dvd-rom into the dvd-rom drive. And install the drivers from step 1 to step 7 in order. Step 1 – install chipset driver 1. Click on the step1-chipset folder and double click on the infinst...

  • Page 77

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-4 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically step 5 – install lan driver 1. Click on the step5-lan folder and select the os folder your system is 2. Double click...

  • Page 78

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-5 step 7 – install uart driver windows 7 step 1: step 2:.

  • Page 79

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-6 step 3: step 4:.

  • Page 80

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-7 step 5: windows 8 step 1:.

  • Page 81

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-8 step 2: step 3:.

  • Page 82

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-9 step 4: step 5:.

  • Page 83

    F u l l - s i z e s b c f s b - h 8 1 h chapter 4 driver installation 4-10 step 6:.

  • Page 84: Programming The

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a - 1 programming the watchdog timer appendix a.

  • Page 85

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a-2 a.1 programming fsb-h81h utilizes fintek 81866 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the aaeon initial watchdog timer program is also attached based on...

  • Page 86

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a-3 there are three steps to complete the configuration setup: (1) enter the mb pnp mode; (2) modify the data of configuration registers; (3) exit the mb pnp mode. Undesired result may occur if the mb pnp mode is not e...

  • Page 87

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a-4 watch dog timer 1, 2, 3 control register (index=f5h,f6h,fah default=00h).

  • Page 88: Main

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a-5 a.2 f81866 watchdog timer initial program main (){ aaeonsuperioopen(); aaeonwdtsetcountmode(bool bminute); // set wdt count mode aaeonwdtsettimeoutcount(byte ttimeout); // set wdt timer aaeonwdtsetenable(bool benab...

  • Page 89

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a-6 void aaeonwdtsettimeoutcount(byte ttimeout){ f81866setldn(0x07); f81866writebyte(f81866_wdt_time_reg, ttimeout); } void aaeonwdtsetenable(bool benable){ f81866setldn(0x07); if(benable){ f81866writebyte(0x30, 0x01);...

  • Page 90

    F u l l - s i z e s b c f s b - h 8 1 h appendix a programming the watchdog timer a-7 void aaeonsuperioclose(){ aaeoniowriteportbyte(f81866_index, 0xaa); }.

  • Page 91: I/o  Information

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-1 i/o information appendix b.

  • Page 92

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-2 b.1 i/o address map.

  • Page 93

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-3.

  • Page 94

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-4 b.2 memory address map.

  • Page 95

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-5 b.3 irq mapping chart.

  • Page 96

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-6.

  • Page 97

    F u l l - s i z e s b c f s b - h 8 1 h appendix b i/o information b-7 b.4 dma channel assignments.

  • Page 98: Mating  Connector

    F u l l - s i z e s b c f s b - h 8 1 h appendix c mating connector c - 1 mating connector appendix c.

  • Page 99

    F u l l - s i z e s b c f s b - h 8 1 h appendix c mating connector c - 2 c.1 list of mating connectors and cables the table notes mating connectors and available cables. Connector label function mating connector available cable cable p/n vendor model no cn1 front panel connector jih vei electronics...

  • Page 100

    F u l l - s i z e s b c f s b - h 8 1 h appendix c mating connector c - 3 cn17 sata port 3 pinrex 770-83-07sb39 sata cable 1709070460 cn18 usb 3.0 port 0 foxconn uea3119c-4fb 1-4f n/a cn19 sata port 0 pinrex 770-83-07sv29 sata cable 1709070460 cn20 sata port 1 pinrex 770-83-07sv29 sata cable 1709070...

  • Page 101: Dio

    F u l l - s i z e s b c f s b - h 8 1 h appendix d dio d - 1 dio appendix d.

  • Page 102

    F u l l - s i z e s b c f s b - h 8 1 h appendix d dio d-2 d.1 dio the related register for configuring dio is list as follows:.

  • Page 103

    F u l l - s i z e s b c f s b - h 8 1 h appendix d dio d-3.

  • Page 104

    F u l l - s i z e s b c f s b - h 8 1 h appendix d dio d-4.

  • Page 105

    F u l l - s i z e s b c f s b - h 8 1 h appendix d dio d-5.

  • Page 106

    F u l l - s i z e s b c f s b - h 8 1 h appendix d dio d-6 the following is a sample code for dio8 as input & dio1 as output high (gpio00, gpio20) outportb(0x2e,0x87); //enter configuration outportb(0x2e,0x87); outportb(0x2e,0x07); //set ldn outportb(0x2f,0x06); outportb(0x2e,0xf0); //gpio set 0 reg...