1. DL manuals
  2. Aaeon
  3. Computer Hardware
  4. HSB-800P
  5. User Manual

Aaeon HSB-800P User Manual - Quick

Manual is about: Half-size SBC

Summary of HSB-800P

  • Page 1

    H a l f - s i z e s b c h s b - 8 0 0 p hsb-800p amd lx800 processor pci half-size cpu card with ddr, ethernet, compactflash™ & 4 com ports & 4 usb hsb-800p manual rev. A 3rd ed. March 2010

  • Page 2

    H a l f - s i z e c p u c a r d h s b - 8 0 0 p i copyright notice this document is copyrighted, 2010. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reprodu...

  • Page 3

    H a l f - s i z e c p u c a r d h s b - 8 0 0 p ii acknowledgments all other products’ name or trademarks are properties of their respective owners. Award is a trademark of award software international, inc. Compactflash™ is a trademark of the compact flash association. Amd, the amd arrow logo and c...

  • Page 4

    H a l f - s i z e c p u c a r d h s b - 8 0 0 p iii packing list before you begin installing hsb-800p, please make sure that the following items have been shipped: 1701340704 flat cable.34p.70cm.Gray for fdd 1701400453 cable.40p 2.54mm idc w/nose w/fold.40p 2.54mm idc w/nose w/fold.45cm.Blue ata-100...

  • Page 5

    H a l f - s i z e c p u c a r d h s b - 8 0 0 p iv contents chapter 1 general information 1.1 introduction................................................................ 1-2 1.2 feature ...................................................................... 1-3 1.3 specification .......................

  • Page 6

    H a l f - s i z e c p u c a r d h s b - 8 0 0 p v 2.17 digital i/o (cn1) ...................................................... 2-11 2.18 lpt port connector (lpt1) .................................... 2-12 2.19 usb connector (usb1~2) ...................................... 2-12 2.20 fan connector (cn...

  • Page 7

    H a l f - s i z e c p u c a r d h s b - 8 0 0 p vi b.4 dma channel assignments ...................................B-3 appendix c mating connector c.1 list of mating connectors and cables.................. C-2.

  • Page 8: General

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 1 general information 1-1 general chapter 1 information.

  • Page 9

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 1 general information 1-2 1.1 introduction aaeon releases the economic half-size single board computer (sbc) – hsb-800p, which is designed to target the industrial control and automation market. Hsb-800p is based on amd lx800 processor, which features ...

  • Page 10

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 1 general information 1-3 1.2 features ultra low voltage cpu power consumption cpu clock 500 mhz onboard 256mb ddr400 memory integrated 2d graphics accelerator, vga support supports crt/lvds 10/100 base-tx ethernet x 1 ultra ata100 x 1; sata i x 2 usb2...

  • Page 11: System

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 1 general information 1-4 1.3 specification system form factor pci half-size card processor amd lx800 system memory on board 256mb ddr400 memory chipset cs5536 ethernet pci 10/100mb lan x 1, rj-45 x 1; realtek 8100c controller audio ac 97 codec daughte...

  • Page 12

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 1 general information 1-5 display: supports crt and lcd simultaneous display chipset lx800 lcd interface up to 24-bit, lvds lcd support memory shared memory up to 16m resolution 1600 x 1200@32bpp at 100mhz for crt 1024 x 768@24bpp for lvds i/o: cs5536 ...

  • Page 13

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 1 general information 1-6 digital i/o 8 bit digital i/o, 4 input/ 4 output by super i/o parallel spp/epp/ecp mode audio ac 97 codec daughter board (optional) lan pci 10/100mb lan x 1, rj-45 x 1; realtek 8100c controller (rear i/o).

  • Page 14: Quick

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-1 quick installation chapter 2 guide notice: the quick installation guide is derived from chapter 2 of the user manual. For other chapters and further installation instructions, please refer to the user manual cd-rom that c...

  • Page 15

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-2 2.1 safety precautions always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electro...

  • Page 16

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-3 2.2 location of connectors and jumpers component side.

  • Page 17

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-4 solder side.

  • Page 18

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-5 2.3 mechanical drawing component side solder side.

  • Page 19

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-6 2.4 list of jumpers the board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: label function jp1 cfd voltage 3.3...

  • Page 20

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-7 2.5 list of connectors the board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each board's connectors: label function fp1 front panel c...

  • Page 21

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-8 2.6 setting jumpers you configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protecte...

  • Page 22

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-9 2.7 cfd voltage 3.3v/5v selection (jp1) jp1 function 1-2 3.3v 2-3 5v (default) 2.8 lcd clock and power selection (jp2) jp2 function 1-3 normal (default) 3-5 inverse 2-4 +5vlcd 4-6 +3vlcd (default) 2.9 inverter voltage sel...

  • Page 23

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-10 2.12 front panel connector (fp1) pin signal pin signal 1 power on button (+) 2 reset switch (+) 3 power on button (-) 4 reset switch (-) 5 ide led (+) 6 power led (+) 7 ide led (-) 8 power led (-) 2.13 front panel connec...

  • Page 24

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-11 2.15 rs-232/422/485 serial port connector (com2) pin signal pin signal 1 dcd (422txd-/485data-) 2 rxd (422rxd+) 3 txd (422txd+/485data+) 4 dtr (422rxd-) 5 gnd 6 dsr 7 rts 8 cts 9 ri/+12v 10 n.C 2.16 irda connector (ir1) ...

  • Page 25

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-12 dio-2 cn1 pin2 bit6 u7 pin21 dio-3 cn1 pin3 bit5 u7 pin22 dio-4 cn1 pin4 bit4 u7 pin23 dio-5 cn1 pin5 bit3 u7 pin24 dio-6 cn1 pin6 bit2 u7 pin25 dio-7 cn1 pin7 bit1 u7 pin26 dio-8 cn1 pin7 bit0 u7 pin27 2.18 lpt port con...

  • Page 26

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-13 7 gnd 8 usbd1- 9 gnd 10 +5v 2.20 fan connector (cn2) pin signal 1 gnd 2 +5v 3 speed sense 2.21 audio input/ output (cn3) pin signal pin signal 1 ac_rst# 2 ac_sync 3 ac_sdin0 4 ac_sdout 5 gnd 6 ac_bitclk 7 gnd 8 +5v 9 n.C...

  • Page 27

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-14 3 vcon 4 gnd 5 bkl_en 2.24 lvds1 (cn7) pin signal pin signal 1 bkl_en 2 n.C 3 vlcd 4 gnd 5 lvds_clk# 6 lvds_clk 7 vlcd 8 gnd 9 tx0# 10 tx0 11 tx1# 12 tx1 13 tx2# 14 tx2 15 tx3# 16 tx3 17 n.C 18 n.C 19 n.C 20 n.C 21 n.C 2...

  • Page 28

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-15 2.26 internal keyboard connector (cn9) pin signal 1 kb_clk 2 kb_data 3 n.C 4 gnd 5 +5v 2.27 ps2 keyboard/mouse connector (cn10) pin signal 1 kb_data 2 ms-data 3 gnd 4 +5v 5 kb_clk 6 ms_clk.

  • Page 29

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 2 quick installation guide 2-16 below table for china rohs requirements 产品中有毒有害物质或元素名称及含量 aaeon main board/ daughter board/ backplane 有毒有害物质或元素 部件名称 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 × ○ ○ ○ ○ ○ 外部信号 连接器及线材 × ○ ○ ○ ...

  • Page 30: Award

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 3 award bios setup 3-1 chapter award 3 bios setup.

  • Page 31

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 3 award bios setup 3-2 3.1 system test and initialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are tw...

  • Page 32: Entering Setup

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 3 award bios setup 3-3 3.2 award bios setup awards bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram so that it retains the setup information ...

  • Page 33: Pc Health Status

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 3 award bios setup 3-4 pc health status this menu shows you the status of pc. Load fail-safe defaults use this menu to load the bios default values for the minimal/ stable performance for your system to operate. Load optimized defaults use this menu to...

  • Page 34: Driver

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 4 driver installation 4-1 chapter driver 4 installation.

  • Page 35

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 4 driver installation 4-2 the hsb-800p comes with a cd-rom that contains all drivers your need. Follow the sequence below to install the drivers: step 1 – install vga driver step 2 – install aes driver step 3 – install lan driver step 4 – install audio...

  • Page 36

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 4 driver installation 4-3 4.1 installation: insert the hsb-800p cd-rom into the cd-rom drive. And install the drivers from step 1 to step 5 in order. Step 1 –install vga driver place the driver cd-rom into your cd-rom drive and follow the steps below t...

  • Page 37

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 4 driver installation 4-4 step 2 –install aes driver place the driver cd-rom into your cd-rom drive and follow the steps below to install. 1. Click on start button 2. Click on settings button 3. Click on control panel button 4. Click on system button 5...

  • Page 38

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 4 driver installation 4-5 2. Double click on setup.Exe 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically step 4– install audio driver place the driver cd-rom into your cd-rom drive and follow ...

  • Page 39

    H a l f - s i z e s b c h s b - 8 0 0 p chapter 4 driver installation 4-6 step 5 – install sata driver place the driver cd-rom into your cd-rom drive and pull up the cd-rom file on your screen. 1. Click on start button 2. Click on settings button 3. Click on control panel button 4. Click on system b...

  • Page 40: Programming The

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 1 programming the appendix a watchdog timer.

  • Page 41

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 2 a.1 programming hsb-800p utilizes ite 8712 chipset as its watchdog timer controller. ( k version ) below are the procedures to complete its configuration and the aaeon intial watchdog timer program is also attach...

  • Page 42

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 3 exit the mb pnp mode. Undesired result may occur if the mb pnp mode is not exited normally. (1) enter the mb pnp mode to enter the mb pnp mode, four special i/o write operations are to be performed during wait fo...

  • Page 43

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 4 require the software to clear them. Bit description 7-2 reserved 1 returns to the wait for key state. This bit is used when the configuration sequence is completed. 0 resets all logical devices and restores confi...

  • Page 44

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 5 watchdog timer time-out value (lsb) register (index=73h, default=00h) bit description 7-0 wdt time-out value 7-0 watchdog timer time-out value (msb) register (index=74h, default=00h) bit description 7-0 wdt time-...

  • Page 45

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 6 a.2 ite8712 watchdog timer initial program .Model small .Code main: call enter_configuration_mode call check_chip mov cl, 7 call set_logic_device ;time setting mov cl, 10 ; 10 sec dec al watch_dog_setting: ;timer...

  • Page 46

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 7 ; game port enable mov cl, 9 call set_logic_device initial_ok: call exit_configuration_mode mov ah,4ch int 21h enter_configuration_mode proc near mov si,word ptr cs:[offset cfg_port] mov dx,02eh mov cx,04h init_1...

  • Page 47

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 8 ret exit_configuration_mode endp check_chip proc near mov al,20h call read_configuration_data cmp al,87h jne not_initial mov al,21h call read_configuration_data cmp al,12h jne not_initial need_initial: stc ret no...

  • Page 48

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 9 mov dx,word ptr cs:[cfg_port+06h] in al,dx ret read_configuration_data endp write_configuration_data proc near mov dx,word ptr cs:[cfg_port+04h] out dx,al xchg al,ah mov dx,word ptr cs:[cfg_port+06h] out dx,al re...

  • Page 49

    H a l f - s i z e s b c h s b - 8 0 0 p appendix a programming the watchdog timer a - 10 set_logic_device proc near push ax push cx xchg al,cl mov cl,07h call superio_set_reg pop cx pop ax ret set_logic_device endp ;select 02eh->index port, 02fh->data port cfg_port db 087h,001h,055h,055h dw 02eh,02f...

  • Page 50: I/o Information

    H a l f - s i z e s b c h s b - 8 0 0 p appendix b i/o information b-1 i/o information appendix b.

  • Page 51

    H a l f - s i z e s b c h s b - 8 0 0 p appendix b i/o information b-2 b.1 i/o address map.

  • Page 52

    H a l f - s i z e s b c h s b - 8 0 0 p appendix b i/o information b-3 b.2 memory address map b.3 irq mapping chart b.4 dma channel assignments.

  • Page 53: Mating Connector

    H a l f - s i z e b o a r d h s b - 8 0 0 p appendix c mating connector c - 1 mating connector appendix c.

  • Page 54

    H a l f - s i z e b o a r d h s b - 8 0 0 p appendix c mating connector c - 2 c.1 list of mating connectors and cables the table notes mating connectors and available cables. Mating connector connector label function vendor model no available cable cable p/n ide1 ide connector catch electronics 1137...

  • Page 55

    H a l f - s i z e b o a r d h s b - 8 0 0 p appendix c mating connector c - 3 lan1 ethernet connector ude rt1-165ab b1a n/a ir1 irda connector jih vei electronics 21b12050-x xs10b-01g -4/2.8 n/a cn10 mini-din ps/2 connector contek man3061f1 g401 kb/ms cable 1700060192 cn9 kb pin header ho-base 2503-...