- DL manuals
- Aaeon
- Touch Panel
- OMNI-2155
- User Manual
Aaeon OMNI-2155 User Manual
Summary of OMNI-2155
Page 1
Last updated: october 21, 2015 omni-2155 expandable hmi panel pc user’s manual 2 nd ed.
Page 2
Preface ii exp an dab le hm i p an el pc om ni -2155 copyright notice this document is copyrighted, 2015. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be repr...
Page 3
Preface iii exp an dab le hm i p an el pc om ni -2155 acknowledgement all other products’ name or trademarks are properties of their respective owners. Amd ® is trademark of advanced micro devices. Microsoft windows ® is a registered trademark of microsoft corp. Ite is a trademark of integrated tech...
Page 4
Preface iv exp an dab le hm i p an el pc om ni -2155 packing list before setting up your product, please make sure the following items have been shipped: item quantity omni-2155 1 phoenix power connector 1 product cd with user’s manual (in pdf) and drivers 1 if any of these items are missing or dama...
Page 5
Preface v exp an dab le hm i p an el pc om ni -2155 about this document this user’s manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/defini...
Page 6
Preface vi exp an dab le hm i p an el pc om ni -2155 safety precautions please read the following safety instructions carefully. It is advised that you keep this manual for future references 1. All cautions and warnings on the device should be noted. 2. Make sure the power source matches the power r...
Page 7
Preface vii exp an dab le hm i p an el pc om ni -2155 17. If any of the following situations arises, please the contact our service personnel: i. Damaged power cord or plug ii. Liquid intrusion to the device iii. Exposure to moisture iv. Device is not working as expected or in a manner as described ...
Page 8
Preface viii exp an dab le hm i p an el pc om ni -2155 fcc statement this device complies with part 15 fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference...
Page 9
Preface ix exp an dab le hm i p an el pc om ni -2155 china rohs requirements (cn) 产品中有毒有害物质或元素名称及含量 aaeon panel pc/ workstation 部件名称 有毒有害物质或元素 铅 (pb) 汞 (hg) 镉 (cd) 六价铬 (cr(vi)) 多溴联苯 (pbb) 多溴二苯醚 (pbde) 印刷电路板 及其电子组件 × ○ ○ ○ ○ ○ 外部信号 连接器及线材 × ○ ○ ○ ○ ○ 外壳 × ○ ○ ○ ○ ○ 中央处理器 与内存 × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ...
Page 10
Preface x exp an dab le hm i p an el pc om ni -2155 china rohs requirement (en) poisonous or hazardous substances or elements in products aaeon panel pc/ workstation component poisonous or hazardous substances or elements lead (pb) mercury (hg) cadmium (cd) hexavalent chromium (cr(vi)) polybrominate...
Page 11
Preface xi exp an dab le hm i p an el pc om ni -2155 table of contents chapter 1 - product specifications ........................................................................................ 1 1.1 specifications .......................................................................................
Page 12
Preface xii exp an dab le hm i p an el pc om ni -2155 2.3.5 board to board connector (cn11) ................................................. 21 2.3.6 lvds backlight connector (cn17) .................................................. 22 2.3.7 mini pcie slot (cn18) ......................................
Page 13
Preface xiii exp an dab le hm i p an el pc om ni -2155 3.4.6.1 super io management: serial port 1 configuration ....... 46 3.4.6.2 super io management: serial port 2 configuration ....... 47 3.4.6.3 super io management: serial port 3 configuration ....... 48 3.4.6.4 super io management: serial port ...
Page 14
Exp an dab le hm i p an el pc om ni -2155 chapter 1 chapter 1 - product specifications.
Page 15
Chapter 1 – product specifications 2 exp an dab le hm i p an el pc om ni -2155 1.1 specifications system processor intel ® celeron ® j1900, 2 ghz intel ® atom™ n2807, 1.58 ghz system memory 204-pin ddr3l 1333 mhz sodimm x 1, up to 8 gb, (j1900) 204-pin ddr3l 1333 mhz sodimm x 1, up to 4 gb, (n2807) ...
Page 16
Chapter 1 – product specifications 3 exp an dab le hm i p an el pc om ni -2155 windows ® 7 windows embedded standard 7 linux kernel 2.6.X or above mechanical construction ip65/ nema 4 for aluminum front bezel ip30 ecc chassis mounting vesa100 dimension (w x h x d) 420 x 265 x 60 mm (16.5 x 10.4 x 2....
Page 17
Chapter 1 – product specifications 4 exp an dab le hm i p an el pc om ni -2155 anti-vibration 1 grms/ 5 ~ 500 hz/ operation (hdd) anti-shock 15 g peak acceleration (11 msec. Duration) emc ce/fcc class a.
Page 18
Chapter 1 – product specifications 5 exp an dab le hm i p an el pc om ni -2155 power supply dc input 9 ~ 30 v lcd display type 15.6” tft lcd, led max. Resolution 1366 x 768 max colors 16.7m colors (6/8-bit for r, g, b) luminance (cd/m 2 )5 400 nits viewing angle 170° (h), 160° (v) backlight led back...
Page 19
Chapter 1 – product specifications 6 exp an dab le hm i p an el pc om ni -2155 1.2 omni modules featuring a modular designed, the omni-2155 can be fitted with a number of modules to expand its base capabilities. Please refer to the sections below for their features. 1.2.1 usb/ com/ lan module featur...
Page 20
Chapter 1 – product specifications 7 exp an dab le hm i p an el pc om ni -2155 1.2.3 minicard and sim card module features minicard x 2 sim card x 2 1.2.4 rs-232/422/485 module features rs-232/422/485 x 4 (selectable by jumper).
Page 21
Chapter 1 – product specifications 8 exp an dab le hm i p an el pc om ni -2155 1.2.5 isolated rs-232/422/485 module features isolated rs-232/422/485 x 4 (selectable by jumper) 2k vdc isolation 1.2.6 digital i/o module features digital i/o x 8 1.2.7 can bus module features can bus with phoenix connec...
Page 22
Chapter 1 – product specifications 9 exp an dab le hm i p an el pc om ni -2155 1.2.8 audio module features mic-in line-out.
Page 23
Exp an dab le hm i p an el pc om ni -2155 chapter 2 chapter 2 – hardware information.
Page 24
Chapter 2 – hardware information 11 exp an dab le hm i p an el pc om ni -2155 2.1 dimensions main panel.
Page 25
Chapter 2 – hardware information 12 exp an dab le hm i p an el pc om ni -2155 omni modules usb/ can/ lan module dual lan module minicard & sim card module rs-232/422/485 module.
Page 26
Chapter 2 – hardware information 13 exp an dab le hm i p an el pc om ni -2155 isolated rs-232/422/485 module digital i/o module can bus module audio module.
Page 27
Chapter 2 – hardware information 14 exp an dab le hm i p an el pc om ni -2155 2.2 list of jumpers please refer to the table below for all of the board’s jumpers that you can configure for your application label function jp1 clear cmos jp3 at/atx mode selection jp4 lvds port backlight lightness contr...
Page 28
Chapter 2 – hardware information 15 exp an dab le hm i p an el pc om ni -2155 2.2.1 clear cmos (jp1) normal (default) clear cmos 2.2.2 at/atx mode selection (jp3) disable (default) enable 2.2.3 lvds port backlight lightness control mode selection (jp4) vr mode pwm mode (default) 2.2.4 lvds inverter ...
Page 29
Chapter 2 – hardware information 16 exp an dab le hm i p an el pc om ni -2155 2.2.5 lvds inverter voltage selection (jp6) pin function 1-2 +12 v (default) 2-3 +5 v 2.2.6 touch selection (jp8) pin function 1-2 4, 8 wire 2-3 5 wire (default) 2.2.7 com2 +12v/+5v/ring selection (jp9) pin function 1-2 +1...
Page 30
Chapter 2 – hardware information 17 exp an dab le hm i p an el pc om ni -2155 2.3 list of connectors please refer to the table below for all of the board’s connectors that you can configure for your application label function cn3 minicard connector with on-board sim cn4 lpc debug port cn6 battery co...
Page 31
Chapter 2 – hardware information 18 exp an dab le hm i p an el pc om ni -2155 2.3.1 minicard connector with on-board sim (cn3) pin signal pin signal 1 pcie_wake# 2 +v3.3a 3 nc 4 gnd 5 nc 6 +1.5v 7 pcie_clk_req# 8 uim_pwr 9 gnd 10 uim_data 11 pcie_ref_clk- 12 uim_clk 13 pcie_ref_clk+ 14 uim_rst 15 gn...
Page 32
Chapter 2 – hardware information 19 exp an dab le hm i p an el pc om ni -2155 51 nc 52 +v3.3a 2.3.2 lpc debug port (cn4) pin pin name signal type signal level 1 lad0 i/o +3.3v 2 lad1 i/o +3.3v 3 lad2 i/o +3.3v 4 lad3 i/o +3.3v 5 +3.3v pwr +3.3v 6 lframe# in 7 lreset# out +3.3v 8 gnd gnd 9 lclk out 1...
Page 33
Chapter 2 – hardware information 20 exp an dab le hm i p an el pc om ni -2155 2 gnd 2.3.4 cfast connector (cn10) pin pin name signal type signal level s1 gnd gnd s2 sata_tx+ diff s3 sata_tx- diff s4 gnd gnd s5 sata_rx- diff s6 sata_rx+ diff s7 gnd gnd pc1 nc pc2 gnd gnd pc3 nc pc4 nc pc5 nc pc6 nc p...
Page 34
Chapter 2 – hardware information 21 exp an dab le hm i p an el pc om ni -2155 pc17 nc 2.3.5 board to board connector (cn11) pin pin name signal type signal level 1 +v5a pwr +5v 2 +v5a pwr +5v 3 +v5a pwr +5v 4 +v5a pwr +5v 5 +v3.3a pwr +3.3v 6 +v3.3a pwr +3.3v 7 +v3.3a pwr +3.3v 8 ex_plt_rst# out 9 +...
Page 35
Chapter 2 – hardware information 22 exp an dab le hm i p an el pc om ni -2155 24 gnd gnd 25 p2_refclkn diff 26 p2_rxn diff 27 p2_refclkp diff 28 p2_rxp diff 29 gnd gnd 30 gnd gnd 31 p2_txn diff 32 clk_pcie_exio_n diff 33 p2_txp diff 34 clk_pcie_exio_p diff 35 gnd gnd 36 gnd gnd 37 pcie_rxn3 diff 38 ...
Page 36
Chapter 2 – hardware information 23 exp an dab le hm i p an el pc om ni -2155 2.3.7 mini pcie slot (cn18) pin pin name signal type signal level 1 pcie_wake# in 2 +3.3vsb pwr +3.3v 3 nc 4 gnd gnd 5 nc 6 +1.5v pwr +1.5v 7 pcie_clk_req# in 8 nc pwr 9 gnd gnd 10 nc i/o 11 pcie_ref_clk- diff 12 nc in 13 ...
Page 37
Chapter 2 – hardware information 24 exp an dab le hm i p an el pc om ni -2155 26 gnd gnd 27 gnd gnd 28 +1.5v pwr +1.5v 29 gnd gnd 30 smb_clk i/o +3.3v 31 pcie_tx-/msata_tx- diff 32 smb_data i/o +3.3v 33 pcie_tx+/msata_tx+ diff 34 gnd gnd 35 gnd gnd 36 usb_d- diff 37 gnd gnd 38 usb_d+ diff 39 +3.3vsb...
Page 38
Chapter 2 – hardware information 25 exp an dab le hm i p an el pc om ni -2155 2.3.8 sata power connector (cn19) pin signal 1 + v5s 2 gnd 2.3.9 sata connector (cn20) pin pin name signal type signal level 1 gnd gnd 2 sata_tx+ diff 3 sata_tx- diff 4 gnd gnd 5 sata_rx- diff 6 sata_rx+ diff 7 gnd gnd 2.3...
Page 39
Chapter 2 – hardware information 26 exp an dab le hm i p an el pc om ni -2155 7 na 8 uim_pwr2 9 gnd 10 uim_dat2 11 refclk- 12 uim_clk2 13 refclk+ 14 uim_rst2 15 lvdsa_data3# 16 uim_vpp2 17 lvds_ddc_data 18 lvds_ddc_clk 19 lvdsb_data0# 20 lvdsb_data0 21 lvdsb_data1# 22 lvdsb_data1 23 lvdsb_data2# 24 ...
Page 40
Chapter 2 – hardware information 27 exp an dab le hm i p an el pc om ni -2155 11 gnd diff 12 tmds_clk- diff 13 nc 14 nc 15 ddc_clk i/o +5v 16 ddc_data i/o +5v 17 gnd gnd 18 +5v pwr +5v 19 hplg_detect in 2.3.12 touchscreen connector (cn29) pin signal pin signal 1 gnd 2 top excite 3 bottom excite 4 le...
Page 41
Chapter 2 – hardware information 28 exp an dab le hm i p an el pc om ni -2155 2.3.13 lan1 connector (cn37) pin signal pin signal 1 mdi0+ 2 mdi0- 3 mdi1+ 4 mdi2+ 5 mdi2- 6 mdi1- 7 mdi3+ 8 mdi3- 2.3.14 lan2 connector (cn38) pin signal pin signal 1 mdi0+ 2 mdi0- 3 mdi1+ 4 mdi2+ 5 mdi2- 6 mdi1- 7 mdi3+ ...
Page 42
Chapter 2 – hardware information 29 exp an dab le hm i p an el pc om ni -2155 2.3.15 dc-in (cn39) pin signal pin signal 1 9-30v 2 gnd 3 earth_gnd 2.3.16 com2 connector (cn40) rs-232 pin signal pin signal 1 dcd 2 rxd 3 txd 4 dtr 5 gnd 6 dsr 7 rts 8 cts 9 ri rs-422 pin signal pin signal 1 txd- 2 txd+ ...
Page 43
Chapter 2 – hardware information 30 exp an dab le hm i p an el pc om ni -2155 3 n/c 4 n/c 5 gnd 6 n/c 7 n/c 8 n/c 9 n/c 2.3.17 remote switch connector (cn43) pin signal pin signal 1 ext_pwrbtn# 2 gnd.
Page 44
Chapter 2 – hardware information 31 exp an dab le hm i p an el pc om ni -2155 2.4 assembling modules to install a module, insert the connector to the omni slot by the side of the pcb box as shown in the image below and secure with the screws provided..
Page 45
Chapter 2 – hardware information 32 exp an dab le hm i p an el pc om ni -2155 2.5 installing the hard disk drive 1. Place the hdd onto the bracket and secure with the screws provided 2. Hook the setup on to the bar above the pcb board as shown below. Secure it with the screw provided * users are adv...
Page 46
Chapter 2 – hardware information 33 exp an dab le hm i p an el pc om ni -2155 2.6 installing dram to install dram, remove the hdd and hdd bracket and insert the ram module as shown below. * users are advised to use dram modules provided and installed by aaeon..
Page 47
Chapter 2 – hardware information 34 exp an dab le hm i p an el pc om ni -2155 2.7 installing the panel mount kit screw the kit on to the panel as shown below with the screws provided. It is advised to assemble the module before the installing the kit. Note: due to the size of the isolated rs-232/422...
Page 48
Exp an dab le hm i p an el pc om ni -2155 chapter 3 chapter 3 - ami bios setup.
Page 49
Chapter 3 – ami bios setup 36 exp an dab le hm i p an el pc om ni -2155 3.1 system test and initialization the board uses certain routines to perform testing and initialization. If an error, fatal or non-fatal, is encountered, a few short beeps or an error message will be outputted. The board can us...
Page 50
Chapter 3 – ami bios setup 37 exp an dab le hm i p an el pc om ni -2155 3.2 ami bios setup the ami bios rom has a pre-installed setup program that allows users to modify basic system configurations, which is stored in the battery-backed cmos ram and bios nvram so that the information is retained whe...
Page 51
Chapter 3 – ami bios setup 38 exp an dab le hm i p an el pc om ni -2155 3.3 setup submenu: main.
Page 52
Chapter 3 – ami bios setup 39 exp an dab le hm i p an el pc om ni -2155 3.4 setup submenu: advanced.
Page 53
Chapter 3 – ami bios setup 40 exp an dab le hm i p an el pc om ni -2155 3.4.1 advanced: cpu configuration options summary: intel virtualization technology disabled enabled optimal default, failsafe default enable or disable intel virtualization technology eist disabled enabled optimal default, fails...
Page 54
Chapter 3 – ami bios setup 41 exp an dab le hm i p an el pc om ni -2155 3.4.2 advanced: ide configuration options summary: sata mode ide mode ahci mode optimal default, failsafe default.
Page 55
Chapter 3 – ami bios setup 42 exp an dab le hm i p an el pc om ni -2155 3.4.3 advanced: usb configuration options summary: legacy usb support enabled optimal default, failsafe default disabled auto enables bios support for legacy usb support. When enabled, usb can be functional in legacy environment...
Page 56
Chapter 3 – ami bios setup 43 exp an dab le hm i p an el pc om ni -2155 3.4.4 advanced: hardware monitor.
Page 57
Chapter 3 – ami bios setup 44 exp an dab le hm i p an el pc om ni -2155 3.4.5 advanced: power management options summary: power mode atx type optimal default, failsafe default at type select power supply mode. Ac power loss last state optimal default, failsafe default power on power off select power...
Page 58
Chapter 3 – ami bios setup 45 exp an dab le hm i p an el pc om ni -2155 3.4.6 advanced: super io management note: serial port 5 ~ 8 are activated with omni module.
Page 59
Chapter 3 – ami bios setup 46 exp an dab le hm i p an el pc om ni -2155 3.4.6.1 super io management: serial port 1 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable serial port (com) possible: use automatic settings optimal default, f...
Page 60
Chapter 3 – ami bios setup 47 exp an dab le hm i p an el pc om ni -2155 3.4.6.2 super io management: serial port 2 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable serial port (com) possible: use automatic settings optimal default, f...
Page 61
Chapter 3 – ami bios setup 48 exp an dab le hm i p an el pc om ni -2155 3.4.6.3 super io management: serial port 3 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable serial port (com) possible: use automatic settings optimal default, f...
Page 62
Chapter 3 – ami bios setup 49 exp an dab le hm i p an el pc om ni -2155 3.4.6.4 super io management: serial port 4 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable serial port (com) possible: use automatic settings optimal default, f...
Page 63
Chapter 3 – ami bios setup 50 exp an dab le hm i p an el pc om ni -2155 3.4.6.5 super io management: serial port 5 configuration options summary: use this device disabled enabled optimal default, failsafe default enable or disable serial port (com) possible: use automatic settings optimal default, f...
Page 64
Chapter 3 – ami bios setup 51 exp an dab le hm i p an el pc om ni -2155 3.4.6.6 super io management: serial port 6 configuration (optional) options summary: use this device disabled enabled optimal default, failsafe default en/disable serial port (com) possible: use automatic settings optimal defaul...
Page 65
Chapter 3 – ami bios setup 52 exp an dab le hm i p an el pc om ni -2155 3.4.6.7 super io management: serial port 7 configuration (optional) options summary: use this device disabled enabled optimal default, failsafe default en/disable serial port (com) possible: use automatic settings optimal defaul...
Page 66
Chapter 3 – ami bios setup 53 exp an dab le hm i p an el pc om ni -2155 3.4.6.8 super io management: serial port 8 configuration (optional) options summary: use this device disabled enabled optimal default, failsafe default en/disable serial port (com) possible: use automatic settings optimal defaul...
Page 67
Chapter 3 – ami bios setup 54 exp an dab le hm i p an el pc om ni -2155 3.5 setup submenu: chipset.
Page 68
Chapter 3 – ami bios setup 55 exp an dab le hm i p an el pc om ni -2155 3.5.1 chipset: north bridge.
Page 69
Chapter 3 – ami bios setup 56 exp an dab le hm i p an el pc om ni -2155 3.5.1.1 north bridge: display control configuration options summary: dvmt pre-allocated 64m optimal default, failsafe default 96m 128m 160m 192m 224m 256m 288m 320m 352m 384m 416m 448m 480m 512m dvmt total gfx mem 128mb 256mb op...
Page 70
Chapter 3 – ami bios setup 57 exp an dab le hm i p an el pc om ni -2155 max primary igfx boot display vbios default crt hdmi optimal default, failsafe default lvds secondary igfx boot display disable crt optimal default, failsafe default hdmi lvds lvds disabled enabled optimal default, failsafe defa...
Page 71
Chapter 3 – ami bios setup 58 exp an dab le hm i p an el pc om ni -2155 10% 0% lvds backlight control normal optimal default, failsafe default.
Page 72
Chapter 3 – ami bios setup 59 exp an dab le hm i p an el pc om ni -2155 3.5.2 chipset: south bridge options summary: audio controller disabled optimal default, failsafe default enabled.
Page 73
Chapter 3 – ami bios setup 60 exp an dab le hm i p an el pc om ni -2155 3.6 setup submenu: security change user/administrator password you can set a user password once an administrator password is set. The password will be required during boot up, or when the user enters the setup utility. Please no...
Page 74
Chapter 3 – ami bios setup 61 exp an dab le hm i p an el pc om ni -2155 3.7 setup submenu: boot options summary: quiet boot disabled enabled optimal default, failsafe default en/disable showing boot logo. Option rom messages force bios optimal default, failsafe default keep current set display mode ...
Page 75
Chapter 3 – ami bios setup 62 exp an dab le hm i p an el pc om ni -2155 3.8 boot: bbs priorities.
Page 76
Chapter 3 – ami bios setup 63 exp an dab le hm i p an el pc om ni -2155 3.9 setup submenu: exit.
Page 77
Exp an dab le hm i p an el pc om ni -2155 chapter 4 chapter 4 – drivers installation & touchscreen settings.
Page 78
Chapter 4 – driver installation 65 exp an dab le hm i p an el pc om ni -2155 4.1 product cd/dvd the omni-2155 comes with a product dvd that contains all the drivers and utilities you need to setup your product. Insert the dvd and follow the steps in the autorun program to install the drivers. In cas...
Page 79
Chapter 4 – driver installation 66 exp an dab le hm i p an el pc om ni -2155 2. Open the setuptxe.Exe file in the folder 3. Follow the instructions 4. Drivers will be installed automatically step 5 – install usb 3.0 drivers (windows 7 only) 1. Open the step5 - usb3.0 folder followed by setup.Exe 2. ...
Page 80
Chapter 4 – driver installation 67 exp an dab le hm i p an el pc om ni -2155.
Page 81
Chapter 4 – driver installation 68 exp an dab le hm i p an el pc om ni -2155 3. Reboot and log in as administrator.
Page 82
Chapter 4 – driver installation 69 exp an dab le hm i p an el pc om ni -2155 4. Run patch.Bat as administrator.
Page 83
Chapter 4 – driver installation 70 exp an dab le hm i p an el pc om ni -2155 for windows 8: 1. Open the apps screen, right click on the command prompt tile and select run as administrator.
Page 84
Chapter 4 – driver installation 71 exp an dab le hm i p an el pc om ni -2155 2. To install the driver (patch.Bat), you will first have to locate the file in command prompt. To do that, first go to the directory which contains the file by entering : eg. If the driver is in d drive, enter d: 3. You ar...
Page 85
Chapter 4 – driver installation 72 exp an dab le hm i p an el pc om ni -2155 for windows 10 1. Open the step8 – serial port driver (optional) folder and select win10_32_64 2. Open the setup.Exe file in the folder 3. Follow the instructions 4. Drivers will be installed automatically.
Page 86
Chapter 4 – driver installation 73 exp an dab le hm i p an el pc om ni -2155 4.2 pcap dual monitor touch settings when two panels are used, they can set to be the primary and secondary display. The instruction below shows how this can be done: 1. Go to display panel and choose your preferred primary...
Page 87
Chapter 4 – driver installation 74 exp an dab le hm i p an el pc om ni -2155 2. Go to tablet pc settings in control panel. Under display options, select the primary display from step 1. Apply the changes and exit. *do not calibrate the screen on your own. Doing so might disrupt the device’s factory ...
Page 88
Exp an dab le hm i p an el pc om ni -2155 appendix a appendix a - watchdog timer programming.
Page 89
Appendix a – watchdog timer programming 76 exp an dab le hm i p an el pc om ni -2155 a.1 watchdog timer initial program table 2 : watchdog relative register table ldn register bitnum value note timer counter 0x07(note3) 0xf6(note4) (note24) time of watchdog timer (0~255) this register is byte access...
Page 90
Appendix a – watchdog timer programming 77 exp an dab le hm i p an el pc om ni -2155 ******************************************************************************** // superio relative definition (please reference to table 1) #define byte sioindex //this parameter is represented from note1 #define ...
Page 91
Exp an dab le hm i p an el pc om ni -2155 appendix b appendix b - i/o information.
Page 92
Appendix b – i/o information 79 exp an dab le hm i p an el pc om ni -2155 b.1 i/o address map.
Page 93
Appendix b – i/o information 80 exp an dab le hm i p an el pc om ni -2155.
Page 94
Appendix b – i/o information 81 exp an dab le hm i p an el pc om ni -2155 b.2 memory address map.
Page 95
Appendix b – i/o information 82 exp an dab le hm i p an el pc om ni -2155 b.3 irq mapping chart.
Page 96
Appendix b – i/o information 83 exp an dab le hm i p an el pc om ni -2155.
Page 97
Appendix b – i/o information 84 exp an dab le hm i p an el pc om ni -2155.