1. DL manuals
  2. Aaeon
  3. Computer Hardware
  4. PCM-3336
  5. Manual

Aaeon PCM-3336 Manual

Manual is about: PC/104 CPU Card With LCD & DiskOnChip

Summary of PCM-3336

  • Page 1

    Pcm-3336 386sx-40 pc/104 cpu card with lcd & diskonchip pcm-3336 rev. A manual part no. 2007333603 printed in taiwan september 2003.

  • Page 2

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 i copyright notice this document is copyrighted, 2003. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, c...

  • Page 3

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 ii acknowledgments all other products’ name or trademarks are properties of their respective owners. L ite is a trademark of integrated technology express, inc. L ibm, pc/at, ps/2, and vga are trademarks of international business machines corporation. Packin...

  • Page 4

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 iii contents chapter 1 general information 1.1 introduction ............................................................................ 1-2 1.2 features................................................................................... 1-3 1.3 specification...

  • Page 5: Chapter 3  Ami Bios Setup

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 iv 2.18 parallel port (cn8)................................................................ 2-13 2.19 serial port (cn9 & cn11).................................................... 2-14 2.20 floppy drive connector (cn10)...........................................

  • Page 6: General

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 1 general information 1- 1 general information chapter 1.

  • Page 7

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 1 general information 1 - 2 1.1 introduction the pcm-3336 comes equipped with an embedded microcontroller ali m6117c which is intel 386sx-40 compatible. In addition, it comes with two serial ports(rs-232), one bi-directional printer port supporting s...

  • Page 8

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 1 general information 1 - 3 1.2 features n onboard ali m6117c, intel 386sx-40 compatible cpu n onboard 8mbytes edo dram n c&t 65545 lcd controller with 512kb display memory.

  • Page 9

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 1 general information 1 - 4 1.3 specifications system l cpu ali m6117c, intel 80386sx-40 compatible l chipset ali m6117c l io chipset ite-8661 l bios ami 128kb flash bios. L system memory onboard 8mb edo dram l enhanced ide interface supports up to t...

  • Page 10

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 1 general information 1 - 5 l ssd support diskonchip up to 1gb l dma 7 dma channels (8237 equivalent) l interrupt 15 interrupt levels (8259 equivalent) display l chipset c&t 65545 l display memory 512kb l display type supports non-interlaced crt and ...

  • Page 11: Quick

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 1 quick installation guide chapter 2.

  • Page 12

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 2 2.1 safety precautions always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive ele...

  • Page 13

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 3 2.2 board layout cn6 j4 j8 cn4 u4 cn8 cn9 bt1 cn1 j3 cn2 j1 j2 u3 u8 cn3 cn7 cn5 cn10 cn11 j5 j6 j7 u17.

  • Page 14

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 4 2.3 board dimension.

  • Page 15: Jumpers

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 5 2.4 list of jumpers the board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: jumpers l a b e l function j1 ...

  • Page 16: Connectors

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 6 2.5 list of connectors the board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors: connectors l a b e l ...

  • Page 17

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 7 2.6 setting jumpers you configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often prot...

  • Page 18

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 8 2.7 hdd led (j1) you can connect a led to indicate that an ide device is in use. J1 function 1 -r/w ide (led cathode) 2 pull high (led anode) 2.8 reset switch (j2) you can connect an external switch to easily reset yo...

  • Page 19

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 9 2.10 lcd power select (j4) you can use j4 jumper to select the voltage setting for the lcd power. To select a certain voltage level close the corresponding pin numbers with a pin cap. Pin 1-2 will provide +5v of power...

  • Page 20

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 10 2.13 rs-232/422/485 com2 setting (j5 & j6) j5 j6 function 1-2, 4-5, 7-8, 10-11 1-2 rs-232 (default) 2-3, 5-6, 8-9, 11-12 3-4 rs-422 2-3, 5-6, 8-9, 11-12 5-6 rs-485 2.14 ide hard drive connector (cn1) pin s i g n a l ...

  • Page 21

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 11 2.15 keyboard connector (cn2) pin s i g n a l pin s i g n a l 1 kbdata 2 kbclock 3 kgnd 4 kvcc 5 msdata 6 msclock 7 gnd 2.16 display connector (cn4 & cn6) cn4 pin s i g n a l pin s i g n a l 1 red 9 nc 2 green 10 gnd...

  • Page 22

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 12 13 p4 14 p5 15 p6 16 p7 17 p8 18 p9 19 p10 20 p11 21 p12 22 p13 23 p14 24 p15 25 p16 26 p17 27 p18 28 p19 29 p20 30 p21 31 p22 32 p23 33 gnd 34 gnd 35 lcd clock (shclk) 36 flm (v sys) 37 acdclk (m) 38 lp (h sys) 39 g...

  • Page 23

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 13 2.18 parallel port (cn8) pin s i g n a l pin s i g n a l 1 strobe 2 paf 3 pd0 4 perr 5 pd1 6 pinit 7 pd2 8 pslin 9 pd3 10 gnd 11 pd4 12 gnd 13 pd5 14 gnd 15 pd6 16 gnd 17 pd7 18 gnd 19 pack 20 gnd 21 pbusy 22 gnd 23 ...

  • Page 24

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 14 2.19 serial port (cn9 & cn11) com1 connector (cn9) pin s i g n a l 1 dlsd1 2 sin1 3 txd 1 4 dtr1 5 gnd 6 dsr 1 7 rts 1 8 cts 1 9 ri 1 10 nc com2 connector (cn11) pin s i g n a l 1 rlsd2 / 485tx- 2 sin1 / 485 tx+ 3 tx...

  • Page 25

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 2 quick installation guide 2 - 15 2.20 floppy drive connector (cn10) pin s i g n a l pin s i g n a l 1 ~ 33 (odd) gnd 2 densel 4, 6 uc 8 index 10 mtra 12 drvb 14 drva 16 mtrb 18 dir 20 step 22 wdata 24 wgate 26 tk 0 28 wpt 30 rdata 32 side1 34 dskchg.

  • Page 26: Ami

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter 3 ami bios setup 3-1 ami bios setup chapter 3.

  • Page 27

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 2 3.1 system test and initialization these routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are t...

  • Page 28: Entering Setup

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 3 3.2 ami bios setup ami bios rom has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed cmos ram so that it retains the setup information when...

  • Page 29: Advanced Chipset Setup

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 4 advanced chipset setup use this menu to change the values in the chipset registers and optimize your system performance. Pci/plug and play configurations this entry appears if your system supports pnp/pci. Peripheral setup use t...

  • Page 30

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 5 3.3 standard cmos setup when you choose the standard cmos setup option from the initial setup screen menu, the screen shown below is displayed. This standard setup menu allows users to configure system components such as date, t...

  • Page 31

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 6 3.4 advanced cmos setup by choosing the advanced cmos setup option from the initial setup screen menu, the screen below is displayed..

  • Page 32

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 7 3.5 advanced chipset setup by choosing the advanced chipset setup option from the initial setup screen menu, the screen below is displayed..

  • Page 33

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 8 3.6 pci/plug and play setup by choosing the pci/plug and play setup from the initial setup screen menu, the screen below is displayed..

  • Page 34

    P c / 1 0 4 c p u c a r d p c m - 3 3 3 6 chapter3 ami bios setup 3 - 9 3.7 peripheral setup by choosing the peripheral setup from the initial setup screen menu, the screen below is displayed..